• 제목/요약/키워드: concentration ratio

검색결과 6,415건 처리시간 0.037초

쇄석다짐말뚝의 응력분담비에 관한 현장실험 연구 (A Field Test Study on stress concentration ratio of Crushed-Stone Column Pile)

  • 이민희;임종철;황근배;최용규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.525-532
    • /
    • 2004
  • Among soft ground treatment methods with granular soil used in domestic, the sand compaction pile method has been utilized greatly, but, as a result of exhaustion of sand and increase of unit cost, a necessity of an alternative method is suggested. In this study, the static load tests for crushed-stone compaction piles which were constructed on test field were performed. Based on test results, stress concentration ratios between the crushed-stone compaction pile and the soft ground were investigated and estimated. The stress concentration ratio was the range of 1.7 to 3.0 and the higher it was the more replacement rate was increased.

  • PDF

암모니아-물 흡수식 냉각기의 동적 해석 (Dynamic Analysis of an Ammonia-Water Absorption Chiller)

  • 김병주
    • 설비공학논문집
    • /
    • 제16권10호
    • /
    • pp.990-998
    • /
    • 2004
  • Dynamic behavior of an ammonia-water absorption system was investigated numerically. Thermal-hydraulic model for a single-effect 3 RT chiller was developed by applying transient conservation equations of total mass, $NH_3$ mass, energy and momentum to each component. Transient variations of system properties and transport variables were analysed during start-up operation. Numerical analyses were performed to quantify the effects of bulk concentration and charging ratio on the system performance in terms of cooling capacity, coefficient of performance, and time constant of system. For an absorption chiller considered in the present study, optimum charging ratio and bulk concentration were to found to exist, which resulted in the maximum cooling capacity and COP. The time constant increased as the charging ratio increased, but decreased with the increase of bulk concentration.

Effect of different concentrations and ratios of ammonium, nitrate, and phosphate on growth of the blue-green alga (cyanobacterium) Microcystis aeruginosa isolated from the Nakdong River, Korea

  • Kim, Hocheol;Jo, Bok Yeon;Kim, Han Soon
    • ALGAE
    • /
    • 제32권4호
    • /
    • pp.275-284
    • /
    • 2017
  • Microcystis aeruginosa causes harmful algal blooms in the Nakdong River of Korea. We studied the effect of different concentrations and ratios of ammonium ($NH_4{^+}$), nitrate ($NO_3{^-}$), and phosphate ($PO{_4}^{3-}$) on growth of this species in BG-11 medium: each nutrient alone, $NO_3{^-}:NH_4{^+}$ ratio, the N : P ratio with fixed total N (TN), and the N : P ratio with fixed total P (TP). The single nutrient experiments indicated that M. aeruginosa had the highest growth rate at $NH_4{^+}$ and $NO_3{^-}$ concentrations of $500{\mu}M$, and at a $PO{_4}^{3-}$ concentration of $5{\mu}M$. The $NO_3{^-}:NH_4{^+}$ ratio experiments showed that M. aeruginosa had the highest growth rate at a ratio of 1 : 1 when TN was $100{\mu}M$ and $250{\mu}M$, and the lowest growth rate at a ratio of 1 : 1 when the TN was $500{\mu}M$. The N : P ratio with fixed TN experiments indicated that M. aeruginosa had the highest growth rates at 50 : 1, 20 : 1, and 100 : 1 ratios when the TN was 100, 250, and $500{\mu}M$, respectively. In contrast, the N : P ratio with fixed TP experiments showed that M. aeruginosa had the highest growth rates at 200 : 1 ratio at all tested TP concentrations. In conclusion, our results imply that the $NO_3{^-}:NH_4{^+}$ ratio and the $PO{_4}^{3-}$ concentration affect the early stage of growth of M. aeruginosa. In particular, our results suggest that the maximum growth of M. aeruginosa is not simply affected by the $NO_3{^-}:NH_4{^+}$ ratio and the N : P ratio, but is determined by the TN concentration if a certain minimum $PO{_4}^{3-}$ concentration is present.

GCP로 개량된 복합지반의 관통률에 따른 응력분담비 (Stress Concentration Ratio According to Penetration Rate of Composite Ground Reinforced with GCP)

  • 나승주;김대현;이익효;이강일
    • 한국지반신소재학회논문집
    • /
    • 제16권2호
    • /
    • pp.35-45
    • /
    • 2017
  • 쇄석다짐말뚝(GCP)은 연약지반의 지지력 증가와 침하량 감소를 실현할 수 있어 연약지반 개량에 활발하게 사용되고 있다. 그리고 GCP 설계에 필요한 응력분담비는 치환율, 상재하중, 깊이, 관통률 등에 따라 달라진다. 그동안 많은 연구자들이 현장 실내 실험, 수치해석 연구를 통해 GCP로 개량된 복합지반의 응력분담비를 제안하였지만 명확하게 제시되지 못한 실정이다. 본 연구에서는 GCP공법의 합리적인 설계법 제안을 위한 기초연구로써, 유한요소해석프로그램인 ABAQUS 6.12-4를 이용하여 GCP로 개량된 복합지반을 모델링하여 치환율과 관통률에 따른 침하량과 응력분담비를 분석하고자 하였다, 그 결과, 최상부 지점을 제외한 다른 지점에서의 응력분담비의 값은 관통률 60%일 때 1.21~5.36, 관통률 80%일 때 1.19~5.45, 관통률 100%일 때 2.16~5.60 이었다. 이는 관통률과 치환율이 증가할수록 응력분담비의 값은 크게 증가함을 알 수 있다.

전해수를 이용한 견섬유 정련 및 세리신 회수(II)-분리막에 의한 세리신 농축을 중심으로- (The Degumming and Sericin Recovery of the Silk fabric Using the Electrolytic Water(II))

  • 배기서;이태상;노덕길;홍영기
    • 한국염색가공학회지
    • /
    • 제16권4호
    • /
    • pp.10-18
    • /
    • 2004
  • In this work, Aqueous sericin solution was prepared by degumming process with electrolytic reduction water. Then, the microfiltration and ultrafiltration systems were applied to the concentration of aqueous sericin solution. The objective of this study was to select the optimum operating condition among the different pressure. The permeate flux and rejection ratio were observed with time, pressure, flow rate and concentration. and, the wastewater and permeated water quality values such as pH, BOD, COD, and NH levels were measured. In order to see the influence of electrolytic reduction water, the flux of pure water and electrolytic reduction water by PVDF22(MF) and PS100(UF) membrane was measured. In microfiltration system, the relative flux reduction decreased rapidly to 0.02 in the 30min, as the concentration polarization and gel layer formation were increased. and then the sericin concentration rejection ratio was 40%. In ultrafiltration system, the permeate flux decreased with time and concentration, and increased with the operating pressure and flow rate. Optimal condition in PS100 membrane system for sericin concentration was operating pressure 1.464kgf/$cm^24, operating flow rate $7\ell/min at\; 40^{\circ}C$. At that time, sericin concentration rejection ratio was 83% respectably. The sericin solution was concentrated from 0.1wt% solution to 0.2 wt % solution during about 2 hrs by the UF filteration membrane system.

K:Fe Ratio as an Indicator of Cyanobacterial Bloom in a Eutrophic Lake

  • Ahn, Chi-Yong;Park, Dae-Kyun;Kim, Hee-Sik;Chung, An-Sik;Oh, Hee-Mock
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권2호
    • /
    • pp.290-296
    • /
    • 2004
  • The effects of potassium, sodium, calcium, magnesium, and iron on cyanobacterial bloom potentials were investigated in Daechung Reservoir, Korea. Potassium showed the highest correlation with the cyanobacterial cell number (r=0.487, P<0.05) and phycocyanin concentration (r=0.499, P<0.05). However, it was not likely that the potassium had directly affected the bloom formation, because the variations of its concentration were not significantly large. In contrast, the Fe concentration fluctuated drastically and exhibited a negative correlation with the cyanobacterial cell number (r=- 0.388, P<0.1) and phycocyanin concentration (r=-0.446, P<0.05). Accordingly, the K:Fe atomic ratio would appear to reflect the extent of cyanobacterial bloom more precisely than K or Fe alone. The K:Fe ratio specifically correlated with cyanobacterial percentage, the cyanobacterial cell number and phycocyanin concentration (r=0.840, P<0.001; r=0.416, P<0.05; r=0.522, P<0.01, respectively). With the K:Fe atomic ratio of over 200, the chlorophyll-a concentration, cyanobacterial cell number, and phycocyanin concentration exceeded $10\mu$g $1^{-1}$20,000 cells $ml^{-1}$, and 20 pM, respectively, the general criteria of eutrophic water.

졸-겔 법에 의한 구형 미분체 Barium Titanate의 제조 (Synthesis of Barium Titanate Spherical Particles by Sol-Gel Method)

  • 김용렬
    • 한국응용과학기술학회지
    • /
    • 제24권3호
    • /
    • pp.246-252
    • /
    • 2007
  • $BaTiO_3$ powders were prepared by sol-gel method from different concentration of KOH aqueous solution and Ba/Ti molar ratio. Particle shape, size and crystal structure of prepared $BaTiO_3$ powders were analyzed by SEM, XRD, and FT-IR. As the result of KOH concentration changing, spherical particles were obtained by condition more than 3 M and particle size decreased as concentration increasing. Different appearance showed between dried and sintered powders against changing of Ba/Ti molar ratio. In case of dried powders, the crystallinity decreased as molar ratio increasing. On the other hand, increased as molar ratio increasing in case of sintered powders.

Relationship Between Blood Mercury Concentration and Waist-to-Hip Ratio in Elderly Korean Individuals Living in Coastal Areas

  • You, Chang-Hun;Kim, Byoung-Gwon;Kim, Jung-Man;Yu, Seung-Do;Kim, Yu-Mi;Kim, Rock-Bum;Hong, Young-Seoub
    • Journal of Preventive Medicine and Public Health
    • /
    • 제44권5호
    • /
    • pp.218-225
    • /
    • 2011
  • Objectives: This study investigated the relationship between the blood mercury concentration and cardiovascular risk factors in elderly Korean individuals living in coastal areas. Methods: The sample consisted of 477 adults (164 males, 313 females) aged 40 to 65 years who visited a Busan health promotion center from June to September in 2009. The relationship between blood mercury concentration and cardiovascular risk factors including metabolic syndrome, cholesterol profiles, blood pressure, body mass index (BMI), waist circumference and waist-to-hip ratio (WHR), was investigated. Variables related to blood mercury concentration were further evaluated using multiple regression analysis. Results: The blood mercury concentration of the study population was 7.99 (range, 7.60 to 8.40) ${\mu}g$/L. In males, the blood mercury concentration was 9.74 (8.92 to 10.63) ${\mu}g$/L, which was significantly higher than that in females (7.21, [6.80 to 7.64] ${\mu}g$/L). The blood mercury concentration of the study population was related to several cardiovascular risk factors including low-density lipoprotein (LDL) cholesterol (p=0.044), high-density lipoprotein (HDL) cholesterol (p=0.034), BMI (p = 0.006), waist circumference (p = 0.031), and WHR (p < 0.001). In males, the blood mercury concentration was significantly correlated with WHR in the multiple regression analysis. Conclusions: In males, the blood mercury concentration was related to waist-to-hip ratio, which is a central obesity index and cardiovascular risk factor. Our finding suggests that cardiovascular disease risk in males was increased by mercury exposure via an obesity-related mechanism.

하천·호소의 유기물 지표 평가 (Index of Organic Matter in Stream and Lake)

  • 유순주;황종연;윤영삼;천세억;한의정
    • 환경영향평가
    • /
    • 제8권1호
    • /
    • pp.81-92
    • /
    • 1999
  • This study discussed the appropriateness of organic matter indexes such as biochemical oxygen demand(BOD) and chemical oxygen demand with potassium permanganate($COD_{Mn}$) in water quality environmental standard of streams and lakes and the applicability of the items to water quality environmental standard to add or substitute COD with potassium dichromate ($COD_{Cr}$) and total organic carbon(TOC) being used as index of organic matter. And indexes of organic matter content and organic carbon concentration were distinguished between dissolved and particulate component in water sample to estimate their effect on pollutants loading in lake and stream. The ratio of $COD_{Cr}$/BOD was 5.1 under BOD concentration 3mg/L in river water quality environmental standard II, and 2.67 above it. This ratio was diminished to 2.04 when BOD concentration was more than 8mg/L, in river quality environmental standard IV. Also the ratio of $COD_{Mn}$/BOD showed 2.16 under 3mg/L(BOD), and 1.1 above it. This ratio is also diminished to 0.84 over 8mg/L(BOD). Accordingly, we should apply this ratio depending on the concentration level to add and change organic matter index of water quality environmental standard newly. The ratio $COD_{Cr}/COD_{Mn}$ both in lake and stream shows 2.37(r=0.986, p<0.001). But the ratios showed range of 2.34~2.50, which is no much difference of this ratio according to $COD_{Mn}$ concentration.

  • PDF

불연속 복합체의 재료역학적 접근을 통한 응력해석 (Stress Analysis of a Discontinuous Composite Using Mechanics of Materials Approach)

  • 김홍건;양성모;노홍길
    • 한국공작기계학회논문집
    • /
    • 제12권4호
    • /
    • pp.63-69
    • /
    • 2003
  • In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime then the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a function of several variables, such as the modulus ratio, the fiber volume fraction, the fiber aspect ratio, is proposed. It is found that the modulus ratio($E_f$/$E_m$) is the essential variable among them. Thus, the stress concentration factor is expressed as a function of modulus ratio in the derivation. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.