• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 춘계 학술발표 강연 및 논문 개요집
• /
• pp.82-83
• /
• 1994

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.135.4-135
• /
• 1998

• 한국콘텐츠학회논문지
• /
• 제16권8호
• /
• pp.477-483
• /
• 2016

두부 모의피폭체를 활용하여 MV X, ${\gamma}$선에서의 선량증가 효과와 금 나노입자의 크기, 물질의 농도에 대한 의존성을 평가하였다. MCNPX code를 이용하여 Monte Carlo 시뮬레이션 기법을 적용하였으며, 입사 에너지는 4, 6, 10, 15 MV X선, Co60 ${\gamma}$선을 사용하였다. 두부 모의피폭체 내에 종양을 묘사하고 내부에 25, 75, 125 nm 직경의 금 나노입자를 삽입하였다. 나노입자의 농도는 5, 15, 25 mg/g을 적용하였으며, 선량 증가 물질이 없을 때를 기준으로 하여 선량증가비를 산출하였다. 입사 에너지가 낮을수록, 선량증가 물질의 농도가 높을수록 높은 선량증가비를 나타내었다. 나노입자의 크기는 입사 에너지가 낮고, 물질의 농도가 높을수록 상대적으로 높은 의존성을 보였다. 금 나노입자를 이용한 선량증가 효과를 나타내는데 기초자료로 활용할 수 있을 것으로 사료된다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E2호
• /
• pp.78-88
• /
• 2006

In order to study the characteristics of cloud, a real-scale experiment for cloud generation was carried out using an extinct vertical mine (430 m height) located in the northeastern Honshu, Japan. The dry particles generated from the three-step concentrations of NaCl solutions were used for cloud generation. The number size distributions of initial dry particles and cloud droplets were monitored by Scanning Mobility Particle Sizer (SMPS) and Forward Scattering Spectrometer Probe (FSSP) at bottom and upper sites of pit, respectively. The polymeric water absorbent film (PWAF) method was employed to measure liquid water content ($W_L$) as a function of droplet size. Moreover the chemical properties of individual droplet replicas were determined by micro-PIXE. The CCN number concentration shows the lognormal form in dependence of the particle size, while the number size distributions of droplets are bimodal showing the peaks around $9{\mu}m$ and $20{\mu}m$ for every case. In comparison to background mineral particles, right shifting of size distribution line for NaCl particles was occurred. When NaCl solutions with three-step different concentrations were neulized, $W_L$ shows the strong droplet size dependence. It varied from $10.0mg\;m^{-3}$ up to $13.6mg\;m^{-3}$ with average $11.6mg\;m^{-3}$. A good relationship between $W_L$ and cloud droplet number concentration was obtained. Both chemical inhomogeneities (mixed components with mineral and C1) and homogeneities (only mineral components or C1) in individual droplet replicas were obviously observed from micro-PIXE elemental images.

• 대한전자공학회논문지SD
• /
• 제39권10호
• /
• pp.35-42
• /
• 2002

Modulation frequency dependences of the pyroelectric properties of PLT (P $b_{1-x}$ L $a_{x}$ $Ti_{1-x}$ 4/ $O_3$) thin films with La concentrations of 5, 10 and 15㏖% have been investigated by using the dynamic method. The PLT thin film with 10㏖% of the La concentration (PLT(10) thin film) shows the most excellent pyroelectric properties among the films. For PLT(10) thin film, the pyroelectric coefficient shows the maximum value of 6.6$\times$10$^{-9}$ C/$\textrm{cm}^2$ㆍK without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are 1.03$\times$10$^{-11}$ Cㆍcm/J and 1.46$\times$10$^{-9}$ Cㆍcm/J, respectively. Voltage responsivity corresponding to the pyroelectric voltage is almost constant at low modulation frequency and decreases in proportional to frequency at high modulation frequency. Voltage responsivity is 5.15 V/W at 8Hz. Noise equivalent power (NEP) and specific detectivity ( $D^{*}$) of the PLT(10) thin film are 9.93$\times$10$^{-8}$ W/H $z^{1}$2/ and 1.81$\times$10$^{6}$ cmH $z^{1}$2/W at the frequency of 100Hz, respectively. The results indicate that PLT(10) thin film is very suitable for pyroelectric IR sensors.s.s.

• 한국재료학회지
• /
• 제1권1호
• /
• pp.23-28
• /
• 1991

저압 화학 증착법으로 증착된 다결정실리콘에 As를 이온주입하여 As농도와 $25~105^{\circ}C$ 범위의 측정온도에 따른 비저항의 변화를 조사하였다. 비저항이 최대가 되는 적정 As농도가 존재하였으며 이때 비저항의 온도의존성면에서 활성화에너지 값도 최대를 보였다. Passivation공정후 감소된 비저항이 $O_2$플라즈마 처리와 $N_2$ 분위기에서의 열처리에 의하여 회복되는 현상에 대하여 설명한다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권6호
• /
• pp.185-188
• /
• 2009

The effects of the growth temperature on the properties of ZnO thin films were investigated by using X-ray diffraction, scanning electron microscopy, ultraviolet-visible spectrophotometry, and Hall measurements. The ZnO films were deposited by rf magnetron sputtering at various growth temperatures in the range of 100-$400{^{\circ}C}$. A strong c-axis preferred orientation is observed for all of the samples. As the growth temperature increases, the crystalline orientation of the ZnO (002) plane is not changed, but the full width at half maximum gets smaller. The dependence of the electron concentration, mobility, and resistivity on the growth temperature exhibits that the ZnO films have a higher electron concentration at higher temperatures, thus giving them a low resistivity. The optical transmittance and band gap energy, calculated from the spectra of optical absorbance, show a significant dependence on the growth temperature. As for the sample grown at $100{^{\circ}C}$, the average transmittance is about 90% in the visible wavelength range and the band gap is estimated to be 3.13 eV.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.511-520
• /
• 2016

Electrolyte-supported symmetric Ni-YSZ cermet electrodes of ca. $23{\mu}m$ were prepared by screenprinting and the impedance was measured as a function of humidity from 2% to 90% balanced in $H_2$ at a total flow rate of 50 sccm. The Ni felt current collector of 1 mm thickness exhibited a Gerischer-like gas concentration impedance in the low frequency range, which was similarly observed in the cermet-supported solid oxide cells, while the Pt paste collector exhibited only electrochemical polarization. The electrochemical polarization of both samples was modeled by a non-ideal diffusion-reaction transmission line model including CPEs with ${\alpha}$= 0.5. In the case of the Pt paste collector, all the Bisquert parameters exhibited humidity dependence to the -1/2 power, supporting a non-faradaic chemical reaction mechanism at three phase boundaries. Consequently, the surface diffusivity and reaction rate increased linearly with humidity. Less pronounced humidity dependence and somewhat lower utilization length with an Ni felt collector can be attributed to the diffusion-limited gas flow through the collector.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2221-2228
• /
• 2021

One-dimensional oxygen transport relation is indispensable to study the oxygen distribution in the LBE-cooled system with an oxygen control device. In this paper, a numerical research is carried out to study the oxygen transport characteristics in a gas-phase oxygen control device, including the static case and dynamic case. The model of static oxygen control is based on the two-phase VOF model and the results agree well with the theoretical expectation. The model of dynamic oxygen control is simplified and the gas-liquid interface is treated as a free surface boundary with a constant oxygen concentration. The influences of the inlet and interface oxygen concentration, mass flow rate, temperature, and the inlet pipe location on the mass transfer characteristics are discussed. Based on the results, an oxygen mass transport relation considering the temperature dependence and velocity dependence separately is obtained. The relation can be used in a one-dimensional system analysis code to predict the oxygen provided by the oxygen control device, which is an important part of the integral oxygen mass transfer models.

• 항공우주시스템공학회지
• /
• 제16권2호
• /
• pp.1-12
• /
• 2022

본 연구에서는 분야별 산업집중도와 고객유형별 매출집중도를 통해 국내 우주산업의 공급 및 수요구조를 분석하였다. 산업집중도 분석 결과 우주활용 분야의 경우 위성방송, 우주보험, 위성항법 등 분야에서 공급 독과점 구조가 나타난 반면, 전통적인 우주산업이라 할 수 있는 우주기기제작 분야에서는 발사대 및 시험시설 분야에서만 공급 독과점 구조가 나타났다. 한편 고객유형별 매출액을 다중회귀분석 한 결과 우주활용 분야에서는 해외, 민간기관, 기타 등으로 수요가 다각화된 반면, 우주기기제작 분야의 경우 공공기관과 민간기관 수요에 집중되어 공공기관을 중심으로 수요독점 구조가 예상된다. 국내 우주산업 구조의 현황과 전망, 정책적 시사점에 대해 논의한다.