• 제목/요약/키워드: concave shaped face

검색결과 8건 처리시간 0.028초

대단면 급속시공을 위한 최적의 곡면막장형상개발에 관한 모형실험 (Model Test on the Optimization of Concave-Shaped Face Development for Rapid Tunnel-Whole-Face Excavation)

  • 유승일;윤지선
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.1335-1342
    • /
    • 2005
  • In this paper, there is intended to introduce the new tunnel face shape, that is concave shaped face, and discusses its effects on the tunnel stabilization. Therefore, a comparative analysis in which the stability of a concave face was compared to that of a conventional plane face on the basis of displacement patterns in the tunnel face was conducted using a model test. In order to check and confirm displacement patterns on the concave face according to the radius of curvature as well as those around the face according to lateral pressure coefficient(k), two experimental concave models, produced at a scale of 1:2 and 1:5(tunnel radius), of the forefront of the curved area extended from plane face was built and tested.

  • PDF

대단면 급속시공을 위한 최적의 곡면막장형상개발에 관한 현장실험 (Field Experiment on the Optimization of Concave-Shaped Face Development for Rapid Tunnel-Whole-Face Excavation)

  • 김태형;윤지선
    • 한국터널지하공간학회 논문집
    • /
    • 제8권1호
    • /
    • pp.65-76
    • /
    • 2006
  • 기존의 NATM과 같은 터널공법에서는 불착 직후 벽연은 숏크리트나 록볼트에 의하여 지지되기 때문에 재래공법과 비교하여 암반의 느슨함을 감소시킬 수 있으나, 막장은 통상 무지보 상태로 놓여있기 때문에 붕괴의 위험성을 항상 내포하고 있는 것이 현실이다 현재 국내 터널시공시에는 막장이 굴진방향에 직립합A로써 응력의 집중이 발생하며 또한 막장의 안정성을 우려하여 단연분할공법을 채택하는 것이 일반적 공법으로 되어왔다. 그러나 이러한 방법은 경제적우로 큰 부당이 되며 공사기간 연장의 한 원인이 된다. 따라서 곡연막장 굴착공법을 개발하여 적용한다면 보다 나은 응력상태를 유지할 수 있어 1회 불진장의 증대 및 분할공법을 피함으로써 공사비절감 및 공사기간 단측에 매우 유리할 것이라 판단된다.

  • PDF

조선후기 미인화에 표현된 얼굴의 미적 특성 (Aesthetic Characteristics of Face in the Late Joseon-dynasty's Beauty Paintings)

  • 이현옥;구양숙
    • 한국의류산업학회지
    • /
    • 제14권6호
    • /
    • pp.918-927
    • /
    • 2012
  • This study identified the aesthetic characteristics of the face description in late Joseon Dynasty beauty paintings. A total of 24 beauty paintings were selected as representative of the late Joseon Dynasty genre of painting works. The paintings were analyzed by the shape, color, and physiognomy of beauty trends from the components of women's faces expressed in the works of artists. The results of this study showed that the shape of the face components expressed a round, curved and thin line. Colors were expressed through Obang-sack (a traditional Korean color). Also the physiognomy of the late Joseon Dynasty's women was soft, wise, economical and brilliant. A round-forehead meant that economical and virtuous housekeeper, thin crescent shaped eyebrows denoted women of wisdom and excellent sensitivity. Single long thin eyelids and implied a women of longevity. A round curved nose were eager tobe a wise mother and a good wife. Small concave lips were desired eagerly by gentle and intelligent women. A curve face implied a subjective women of insight and good memory. In conclusion, the late Joseon Dynasty beauty paintings expressed a traditional Korean beauty face and a modern baby face. The data are useful for the aesthetic standards of modern through meaning of Korean traditional beauty.

Hard- and soft-tissue profiles of the midface region in patients with skeletal Class III malocclusion using cone-beam computed tomography multiplanar-reconstructed image analysis

  • Kim, Bomi;Lee, Hyung-Chul;Kim, Seong-Hun;Kim, Yongil;Son, Woosung;Kim, Seong Sik
    • 대한치과교정학회지
    • /
    • 제48권3호
    • /
    • pp.143-152
    • /
    • 2018
  • Objective: This study examined cone-beam computed tomography (CBCT)-derived multiplanar-reconstructed (MPR) cross-sections to clarify the salient characteristics of patients with skeletal class III malocclusion with midface deficiency (MD). Methods: The horizontal and sagittal plane intersection points were identified for middle-third facial analysis in 40 patients in the MD or normal (N) groups. MPR images acquired parallel to each horizontal plane were used for length and angular measurements. Results: A comparison of the MD and N groups revealed significant differences in the zygoma prominence among female patients. The convex zygomatic area in the N group was larger than that in the MD group, and the inferior part of the midface in the N group was smaller than that in the MD group for both male and female patients. A significant difference was observed in the concave middle maxillary area among male patients. Conclusions: This study was conducted to demonstrate the difference between MD and normal face through MPR images derived from CBCT. Male patients in the MD group had a more flattened face than did those in the N group. Female patients in the MD group showed a concave-shaped lower section of the zygoma, which tended to have more severe MD. These findings indicate that orthognathic surgery to improve skeletal discrepancy requires different approaches in male and female patients.

횡방향 타입 로드헤더의 터널면 절삭공정 고찰 (Operating Process of Transverse Type Roadheader for Tunnel Excavation in Korea)

  • 조민기;조정우;김문규;정재훈;최성현
    • 터널과지하공간
    • /
    • 제33권1호
    • /
    • pp.1-9
    • /
    • 2023
  • 국내 터널현장에 도입된 드럼타입 로드헤더의 작동방식 및 현장 운영 사례를 소개하였다. 축방향 타입과 횡방향 타입의 작동에 따른 절삭력과 반력의 방향을 분석하였다. 텔레스코픽 실린더의 사용 유무에 따른 터널면 형성의 차이점을 설명하였다. 실린더를 사용하지 않는 경우, 오목한 작은 반경의 터널면이 형성되어 터널면을 좌우로 구분하여 굴진하는 것으로 조사되었다. 그리고 국내 경암 터널 굴착환경에서 썸핑과 쉬어링 공정의 적용방안을 도해적으로 설명하고, 굴착공정에 대한 기존 설명자료를 일부 보완하였다.

경남 밀양 얼음골 일대의 지형적 특성 -Talus를 중심으로- (Geomorphic Features of ${\check{O}}rumkol$(Frozen Valley) Area (Kyungnam Province, South Korea) - Mainly about Talus -)

  • 전영권
    • 한국지역지리학회지
    • /
    • 제3권1호
    • /
    • pp.165-182
    • /
    • 1997
  • 본 연구는 경남 밀양시 천황산 북사면상에 분포하는 얼음골 일대를 대상으로 얼음골의 형성원인을 개괄하였으며, 얼음골에서 특히 잘 발달하고 있는 talus에 대해서 형태적, 성인적, 지형발달사적 특성을 분석하여 다음과 같은 결론을 얻었다. 첫째, 깊고 넓은 곡저를 가지는 얼음물의 경우 그것의 형성원인은 (1) 특이한 관입구조(다량의 응회암 포함) 또는 (2) 관입이나 분출 이후 냉각 수축과정에서 야기된 함몰와지의 형성으로 인한 지형적 특성으로 추정되나 분명하지는 않다. 둘째, talus의 형태적 특성은 외양이 설상 또는 원추상, 사면경사 $32^{\circ}$ 이상으로 일반적인 경향을 보이지만 talus의 분포밀도는 매우 높다. 세째, talus는 최종빙기 동안의 주빙하적 기후환경하에서 형성되었으며, 그것의 유형은 rock fall talus에 해당된다. 네째, talus의 지형발달단계는 현재 사지형화단계이며 바람이나 유수에 의한 세립물질의 선택적 집적이 있는 곳에서는 식생이 정착하여 식생 피복지가 점차 증가하고 있다.

  • PDF

태백산맥 남부산지의 암설사면지형 (The Study on the Debris Slope Landform in the Southern Taebaek Mountains)

  • 전영귄
    • 대한지리학회지
    • /
    • 제28권2호
    • /
    • pp.77-98
    • /
    • 1993
  • 본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.

  • PDF

의성 빙계계곡 일대의 지형적 특성 -테일러스를 중심으로- (Geomorphic Features of Bing-gye Valley Area(Kyongbuk Province, South Korea) -Mainly about Talus-)

  • 전영권
    • 한국지역지리학회지
    • /
    • 제4권2호
    • /
    • pp.49-64
    • /
    • 1998
  • 연구지역에서 발달하는 테일러스들은 테일러스의 일반적인 특성을 잘 반영하고 있다. 우리나라에 분포하는 테일러스가 보통 rock fall talus이듯이 본 연구지역의 테일러스도 동일한 유형으로 판단된다. 또 테일러스의 사면형태, 형성시기 발달과정, 미지형적 특성 등은 지금까지 발표된 여러 연구결과들과 거의 일치하고 있다. 그러나 인접한 테일러스간의 경계 부분에서는 암설입경의 상대적 크기에 따라 약간의 지형적 차이점을 인식할 수 있었다. 특히 본 연구에서는 테일러스 암설 최적층의 내부구조를 국내 처음으로 확인하여 3가지의 뚜렷한 층위를 구분할 수 있었다. 즉, 암설로만 구성된 표층과 암실과 세립물질(실트질 모래)이 혼재된 중간층 그리고 과거의 토양층인 기저층 등으로 구분된다. 또 암설 퇴적층에 대한 내부구조 인식은 테일러스 형성 당시로 부터 현재까지의 기후환경과 암설의 퇴적양상을 밝히는데 매우 중요하며 앞으로 이 분야의 연구에 큰 도움을 줄 것으로 생각된다. 한편 국지적으로 특수기상이 나타나는 빙혈이 있는 빙계계곡의 경우 그것의 형성에는 단층작용의 역할이 중요한 것으로 판단된다. 그러나 이 곳을 흐르는 쌍계천이 유독 빙계계곡에서만 협곡(빙계계곡의 폭은 주변 곡쪽의 $1/8{\sim}1/10$정도임)을 형성하는 이유에 대해서 정곡의 가능성을 제시했지만 입증할 만한 자료가 없는 것이 유감이다.

  • PDF