• 한국가시화정보학회지
• /
• 제18권2호
• /
• pp.35-38
• /
• 2020

Airfryer is used to heat a food up by convecting hot air upward around the food. In this study, we investigated the effect of the bottom-shape of the food container in airfryer on the upward convection velocity of hot air to find an optimal bottom-shape by computational fluid dynamics. Numerical experiments were performed by solving the incompressible Navier-Stokes equations with turbulence model. We found that the maximum upward velocity with concave flow-passage on the bottom was bigger than that with the flat bottom and that the maximum upward convection velocity was achieved when the number of concave flow-passage with fan-shape is around six. The pressure drop by the internal flow was found to increase as the number of the concave flow-passage on the bottom increased probably due to increase of the surface area of the bottom. Therefore, it can be said that the optimal number of the concave flow-passage is around six for the flow rate considered in this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.213-220
• /
• 2000

Numerical modeling of cut slope has some limits in simulating the real slopes. In the case of 2D analysis of slope stability, it is assumed that slope is simply straight even when it is concave or convex in plan view. In this study, 3D analysis in curved shape slopes has been conducted for the comparison with 2D analysis in terms of failure mode and factor of safety. For this, 3D analysis by FLAC3D was compared with 2D analysis in plane strain condition and axi-symmetric model condition by FLAC. It was also observed how safety factors of slopes were affected by the variation of the tensile strength and cohesion, which are important variables to decide whether the slope fails or not. 2D analysis of concave slopes under plane strain condition showed much smaller safety factors by 16-40 % errors depending on the radius of curvature of slopes, compared to the more realistic values from 3D analysis. In case of convex slopes, the lower values by 7-10 % has been reported. 2D analysis of axi-symmetric model showed also smaller safety factors by 6-10 % and by 2-4 %, in case of concave and convex slopes, respectively. Such results are expected to contribute to the better understanding of failure process and could be applied for improved design of slopes.

• 한국음향학회지
• /
• 제10권6호
• /
• pp.77-81
• /
• 1991

단백질수용액중의 초음파흠수 mechanism을 규명하기 위하여 천연단백질인 egg white의 초음파 흡수측정을 주파수 0.2-10MHz, 온도 10-50℃에서 행하엿다. 측정방법은 0.2-10MHz 주파수범위에서 초 음파흡수측정이 가능한 plano-concave 공명법을 사용하였다. 그 결과 0.2-10MHz의 주파수범위에 대해 흡수계수는 측정한 전 온도에서 주파수의 1.25(±0.02) 승에 비례하고, egg white의 농후부분과 수용성부 분 및 aging 효과에 대한 음향학적인 차는 나타나지 않았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.180-185
• /
• 2013

A new formulation of the MNDIF method is introduced to extract highly accurate natural frequencies of concave plates with arbitrary shape. Originally, the MNDIF method cannot yield accurate natural frequencies for concave plates. To overcome this weak point, a new approach of dividing a concave plate into two convex domains is proposed and the validity and accuracy is shown in a verification example.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.658-663
• /
• 2013

A new formulation of the MNDIF method is introduced to extract highly accurate eigenvalues of concave acoustic cavities with arbitrary shapes. It is said that the MNDIF method cannot yield accurate eigenvalues for concave cavities. To overcome this weak point, a new approach of dividing a concave cavity into two convex domains is proposed. The validity of the proposed method is shown through a case study.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.11-16
• /
• 2011

Numerical analyses have been carried out to analyze the three-dimensional turbulent heat transfer by impingement jet on a concave surface with variation of geometric configurations. Three-dimensional Reynolds averaged Navier-stokes equations have been calculated using the shear stress transport turbulent model. The numerical results for heat transfer rate were validated in comparison with the experimental data. The distance between jet nozzles and angle of inclined jet nozzle were selected as the geometric variables. Area-averaged Nusselt numbers on concave surface are evaluated to find the characteristics of heat transfer with the two geometric variables. The heat transfer increases as the distance between jet nozzles increases, and the inclined impinging jets show much better heat transfer performance than the vertical impinging jet.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.159-166
• /
• 2005

This study deals with the correction of gear tooth profile error by finish roll forming. First, we experimentally confirmed that the tooth profile error is a synthesis of the concave error and the pressure angle error. Since various types of tooth profile errors appear in the experiments, we introduced evaluation parameters for rolling gears to objectively evaluate profile quality. Using these evaluation parameters, we clarified the relationship among the tooth profile error, the addendum modification factor (A. M. factor), and the tool loading force. We verified the character of concave error, pressure angle error, tool loading force and number of cycles of finish roll forming by using a forced displacement method. This study makes clear that tool loading force and number of cycles of finish roll forming are very important factors that affect involute tooth profile error. The results of the experiment and analysis show that the proposed method reduces concave and pressure angle errors.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.100-103
• /
• 2011

In the present work, a numerical study of fluid flow and heat transfer on the concave surface with impinging jet has been performed by solving three-dimensional Reynods-averaged Naver-Stokes(RANS) equations. The constant temperature condition was applied to the concave impingement surface. The inclination angle of jet nozzle and the distance between jet nozzles are chosen as design variables under equivalent mass flow rate of working fluid into cooling channel, and area averaged Nusselt number on concave impingement surface is set as the objective function. Thirteen training points are obtained by Latin Hypercube sampling method, and the PEA model is constructed by using the objective function values at the trainging points. And, the sequential quadratic programming is used to search for the optimal paint from the PBA model. Through the optimization, the optimal shape shows improved heat transfer rate as compared to the reference geometry.

• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.725-733
• /
• 2013

An improved formulation of the MNDIF method is introduced to extract highly accurate natural frequencies of concave plates with arbitrary shape. Originally, the MNDIF method cannot yield accurate natural frequencies for concave plates. It can be applicable to only convex plates. To overcome this weak point, a new approach of dividing a concave plate into two convex domains and applying the MNDIF method to each domain is proposed and the validity and accuracy are shown in verification examples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.143-148
• /
• 1995

A study on the generation of optimum tool path for machining the concave parts is discussed. Above all, the various cutting factors and their relationships are considered. Then optimum tool path for concave parts is generated on these cutting variables and their relationships. It is difficult for existing CAD/CAM systems tomachine the concave parts. For cutting the part even the experienced craft must give many attentions and muchtime since it needs consideration of various cutting conditions and geometric properties. The optimum tool path for the concave part is generated onnot only geometric properties byut also cutting conditions. We choose, as variables, feed and cutting direction for productivity, diameter of tool and constant(stable) cutting force for machining accuracy. The results are verified through simulation of the index of performance and cutting force.