• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.6 s.154
• /
• pp.870-879
• /
• 2006

In this study, the difference in the mechanical properties of silver and cotton weft knitted fabrics was studied. Six silver fabrics for the summer ladies' knit outwear were knitted varying knit structure and fabric density. Two commercial cotton knitted fabrics were selected to compare the properties. subjective sensation of hand of the fabrics was also studied. Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(THV) was carried out according to the KW-304 Summer. The result of the research show that silver weft knitted fabrics had lower LT, RT, G, 2HG and higher EM, W, LC, WC, RC than cotton weft knitted fabrics. The use of silver yam contributed to increase in surface roughness of knitted fabrics. As the silver knitted fabrics became thicker compressional energy increased. The use of silver yarns contributed to much better fabric handle compared with the use of cotton yam only. It appeared that coefficient of friction of tuck stitch was larger than that of plain and interlock stitch. KOSHI and FUKURAMI values of the tuck samples were significantly higher than those values of the plain and interlock samples, while SHARI values were low in general. The total hand value of tuck stitch was higher than those of interlock and plain stitch.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.676-682
• /
• 2010

Superior hydrophilic properties will allow varieties of polyester(PET) fiber materials, fabrics and industrial materials a broader scope of use. The purpose of this study was to investigate the effect of water-absorbent softener treatment on the end-use properties and the hand of polyester knitted fabrics. Two different fabrics were knitted for the summer ladies' outwear; PET jersey and PET mesh. Variables were softner treatment and stitch type(jersey and mesh). Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(T.H.V.) was calculated according to the KN-304 Summer. Both water-absorbent softner treatment and stitch types affected mechanical properties and hand values of PET fabrics. Mesh were thicker than single jersey stitch. As they became thicker, tensile, shear, and compressional energy increased. It appeared that coefficient of friction of mesh stitch was larger than that of single jersey stitch. The coefficient of friction and the mean deviation of surface roughness were decreased by softener treatment. After softner treatment KOSHI and SHARI of the both PET jersey and PET mesh decreased. However, FUKURAMI values of PET jersey increased and that of PET mesh decreased. The T.H.V. of the treated PET jersey was lower than that of the untreated one, while the T.H.V. of the treated PET mesh was higher than that of the untreated one. Overall T.H.V. of the single jersey was better than that of the mesh before and after softner treatment.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.8-16
• /
• 2004

An inversion method is presented for the determination of the compressional wave speed, compressional wave attenuation, thickness of the sediment layer and density as a function of depth for a horizontally stratified ocean bottom. An experiment for estimating those properties was conducted in the shallow water of South Sea in Korea. In the experiment, a light bulb implosion and the propagating sound were measured using a VLA (vertical line array). As a method for estimating the geoacoustic properties, a coherent broadband matched field processing combined with Genetic Algorithm was employed. When a time-dependent signal is very short, the Fourier transform results are not accurate, since the frequency components are not locatable in time and the windowed Fourier transform is limited by the length of the window. However, it is possible to do this using the wavelet transform a transform that yields a time-frequency representation of a signal. In this study, this transform is used to identify and extract the acoustic components from multipath time series. The inversion is formulated as an optimization problem which maximizes the cost function defined as a normalized correlation between the measured and modeled signals in the wavelet transform coefficient vector. The experiments and procedures for deploying the light bulbs and the coherent broadband inversion method are described, and the estimated geoacoustic profile in the vicinity of the VLA site is presented.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.486-491
• /
• 2012

This study examined the sound characteristics of Taekwondo uniform fabrics to investigate the relationship between the sound parameters and the mechanical properties of the fabric as well as to provide the conditions to maximize the frictional sound of the uniform. Frictional sounds of 6 fabrics for Taekwondo uniforms were generated by the Simulator for Frictional Sound of Fabrics. The frictional speeds were controlled at low(0.62 m/s), at mid(1.21 m/s) and at high(2.25 m/s) speed, respectively. The frictional sounds were recorded using a Data Recorder and Sound Quality System subsequently, the physical sound properties such as SPL(Sound Pressure Level) and Zwicker's psychoacoustic parameters were calculated. Mechanical properties of specimens were measured by KES-FB. The SPL, Loudness(Z) values increased while Sharpness(Z) value decreased. In the physical sound parameter, specimen E had the highest SPL value at low speed and specimen B at high speed. In case of Zwicker's psychoacoustic parameters, the commercially available Taekwondo uniform fabrics(E, F) showed higher values of Loudness(Z), Sharpness(Z), and Roughness(Z), that indicates they can produce louder, shaper and rougher sounds than other fabrics for Taekwondo uniforms. The decisive factors that affected frictional sounds for Taekwondo uniforms were W(weight) as well as EM(elongation at maximum load) at low speed and WC(compressional energy) at high speed.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.154-165
• /
• 2016

This paper presents experimental results to investigate the affects of acidic solution under loading condition on rock properties. In the experiment, the variations of various rock properties including effective porosity, thermal conductivity, and etc were investigated with different pHs of solution and magnitudes of loading. The results show that the rock property change was increased with low pH under loading. It was predicted that chemical reaction rate would be increased in low pH. Below the crack initiation stress of the rock specimen, the variation of rock property change was reduced with increased loading. It could be explained with the reduced chemical reaction area by the compressional loading if there is no crack generation.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.39-39
• /
• 2003

The plasmaspheric region shows relatively strong longitudinal asymmetry in the sense that the location of the plasmapause and the density distribution significantly vary with respect to local time, and this asymmetry effect has been neglected in previous magnetospheric ULF wave studies. In this study, we numerically examine the MHD wave properties of field line resonances (FLRs) and Pi2 pulsations when the inner magnetosphere is assumed to be asymmetric. We use the dipole magnetic field model, but our density model is based on. observational data from the IMAGE satellite. We assume an impulsive input in the magnetotail, which can be associated with a substorm onset. Our results suggest that local FLRs appear in both the radial and azimuthal oscillations owing to the asymmetry. Plasmaspheric Pi2 signals appear in the compressional component, but they are more strongly affected by ambient plasmaspheric structure than the FLRs. We compare our results with the observational data of Pi2 events.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.177-197
• /
• 1999

The measurement of sonic velocities is commonly used as an index of engineering properties of rock, but it is not widely appreciated that this velocity can change markedly with the degree of saturation of the sample. This paper records the nature of this variation as seen in samples of Korean granite. The ISRM method of testing suggested for this index can also create difficulties, especially if vaseline is used as a coupling agent, and invades the samples, and if the sample volume changes with degree of saturation. Careful measurements of the natural variation in sonic velocity that occur in a sample whose saturation is gradually increased may be a means of assessing the relic stresses within it.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.119.1-119.1
• /
• 2012

It is well known that the FLRs are excited by compressional waves via mode conversion, but there has been no apparent criterion on the maximum amplitude in the regime of linear approximations. Such limited range of amplitude should be understood by including nonlinear saturation of FLRs, which has not been examined until now. In this study, using a three-dimensional magnetohydrodynamic (MHD) simulation code, we examine the evolution of nonlinear field line resonances (FLRs) in the cold plasmas. The MHD code used in this study allows a full nonlinear description and enables us to study the maximum amplitude of FLRs. When the disturbance is sufficiently small, it is shown that linear properties of MHD wave coupling are well reproduced. In order to examine a nonlinear excitation of FLRs, it is shown how these FLRs become saturated as the initial magnitude of disturbances is assumed to increase. Our results suggest that the maximum amplitude of FLRs become saturated at the level of the same order of dB/B as in observations roughly satisfies the order of ~0.01. In addition, we extended this study for the plasma sheet boundary layer (PSBL) region. We can discuss the maximum disturbances of the Alfven via mode conversion becomes differently saturated through each region.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.39.2-39.2
• /
• 2010

Field line resonances (FLRs) observed in the magnetosphere often have the amplitude of a few nT, which indicates that dB/B roughly satisfies ~0.01. It is well known that the FLRs are excited by compressional waves via mode conversion, but there has been no apparent criterion on the maximum amplitude in the regime of linear approximations. Such limited range of amplitude should be understood by including nonlinear saturation of FLRs, which has not been examined until now. In this study, using a three-dimensional magnetohydrodynamic (MHD) simulation code, we examine the evolution of nonlinear field line resonances (FLRs) in the cold plasmas. The MHD code used in this study allows a full nonlinear description and enables us to study the maximum amplitude of FLRs. When the disturbance is sufficiently small, it is shown that linear properties of MHD wave coupling are well reproduced. In order to examine a nonlinear excitation of FLRs, it is shown how these FLRs become saturated as the initial magnitude of disturbances is assumed to increase. Our results suggest that the maximum amplitude of FLRs become saturated at the level of the same order of dB/B as in observations. In addition, we discuss the role of both linear terms and nonlinear terms in the MHD wave equations.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.15-24
• /
• 2021

In Korea, which is mostly mountainous, the proportion of tunnel and underground space development are increasing. Although the ground is reinforced by applying the ground improvement method during underground space development, accidents still occur frequently in Korea. In the grouting method, a representative ground reinforcement method, the effect was judged by comparing the total amount of injection material with the amount of injection material used during the actual grouting construction. However, it is difficult to determine whether the ground reinforcement is properly performed during construction or within the target ground. In order to solve this problem, it is necessary to study a new method for quality control during or after construction by measuring electrical resistivity after performing grouting by mixing carbon fiber, which is a conductive material, and microcement, which is a grout material. In this study, as a basic study, a cement specimen mix ed with 0%, 3%, 5%, 7% of carbon fiber was prepared to evaluate the performance of the grout material mixed with carbon fiber, which is a conductive material. The prepared specimens were wet curing for 3 days, 7 days, and 28 days under 99% humidity, and then compression wave velocity and shear wave velocity were measured. As a result of the compression wave velocity and shear wave velocity measurement, it showed a tendency to increase with the increase in the compounding ratio of carbon fibers and the number of days of age, and it was confirmed that the elastic modulus and shear modulus, which are the stiffness of the material, also increased.