• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.783-792
• /
• 2018

This paper presents a detailed theoretical study of the sleeved compression members based on a mechanical model. In the mechanical model, the core protrusion above sleeve and the contact force between the core and sleeve are specially taken into account. Via the theoretical analyses, load-displacement relationships of the sleeved compression members are obtained and verified by the experimental results. On the basis of the core moment distribution changing with the increase of the applied axial load, failure mechanism of the sleeved compression members is assumed and proved to be consistent with the experimental results in terms of the failure modes and the ultimate bearing capacities. A parametric study is conducted to quantify how essential factors including the core protrusion length above sleeve, stiffness ratio of the core to sleeve, core slenderness ratio and gap between the core and sleeve affect the mechanical behaviors of the sleeved compression members, and it is concluded that the constrained effect of the sleeve is overestimated neglecting the core protrusion; the improvement of ultimate bearing capacity for the sleeved compression member is considered to be decreasing with the decrease of the core slenderness ratio and for the sleeved compression member with core of small slenderness ratio, small gap and small stiffness ratio are preferred to obtain larger ultimate bearing capacity and stiffness.

• 한국염색가공학회지
• /
• 제33권2호
• /
• pp.87-95
• /
• 2021

In this study, the application of a medical compression sleeve of Moisture Responded Transformable(MRT) fibers to the treatment of lymphedema after surgery in breast cancer patients was investigated. MRT fibers were manufactured with PET and Nylon6 bi-component cross-section yarns, and compression sleeves of sleeves 1, 2, 3, and 4 were knitted in order of size, and then the physical properties and clinical tests were evaluated. As a result, the pressure of compression sleeve in wrinkle was the lowest in sleeve 1 with 3.81 kPa, and the highest in sleeve 4 with 5.22 kPa. Elastic recovery rate is that all parts except the top of the sleeve 1 exhibited 100%. The air permeability was good at 12.1 ~ 16.1 cm³/cm²/sec, and peeling was also comparatively excellent as grade 3. In addition, the weight of the compression sleeves 1, 2, and 3 decreased as 18.3 ~ 23.0 g/m² depend on size, while the compared sample was heavier with 17.39 ~ 32.61 g/m². In lymphoscintigraphy test, it was confirmed that the function of remaining lymph node was good in all patients. Although there were no differences between samples in skin irritation and tightness in wearing comfort, the manufactured sleeves showed better fit, lightness, fashion and breathability than the comparable sleeves.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.53-62
• /
• 2004

A single layer latticed dome is one of the most efficient structures because of its low specivic gravity. For easily analyzing of a single layer latticed dome, joint system is assumed to be pin or rigid joint. However, its joint uses ball whose system has intermediate properties of pin and rigid joint. Therefore this study has a grasp of bending rigidity, stress and mechanical properties through experimental and analyzing method of the bolt inserted ball joint. To analyze the stress of bolt and sleeve, this study uses through 3D elastic contact and cubic element, and then the ball and the bolt are perfectly connected for easily analyzing Compared experimental results to F.E.M, each specimen has an error of less than 12 percent. In the results of stress distribution through F.E.M, stress occurs from bottom of bolt to top of sleeve, and most of tension appears on the bolt, also compression occurs from upper parts of the bolt to the sleeve. The assumption of bending stiffness in ball joint is well known that bolt resists only tension and upper sleeve resiss compression. The results of experiment and analysis have $7{\sim}56%$ error, assuring that upper part of bolt occurs of partial compression. In the result of modified assumption have $4{\sim}20%$ error.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.321-324
• /
• 2008

본 논문은 CFRP 긴장재를 정착시키기 위해 압착형 정착방식을 적용하였다. 예비실험을 통하여 압착형 정착구의 정착 가능성(정착성능 최대 83%)을 확인하였고, 압착방식의 정착구 개발을 위해 슬리브 제원, 인서트 유무 등의 다양한 변수에 대해 실험연구를 수행하였다. 본 연구는 압착형 슬리브 내부 및 인서트 형상을 변화시켜 이러한 변수가 정착성능에 미치는 영향을 고찰하였다. 실험결과, 슬리브 길이가 증가하면 최대하중도 18${\sim}$22% 증가하는 것으로 나타났고, 옥사이드 표면처리보다 슬리브 길이의 증가가 강도 향상에 유리한 것으로 판단된다. 알루미늄 인서트를 적용한 경우도 마찬가지로 정착성능은 인서트 형상 변화보다 슬리브 길이의 영향을 받는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제20권5호
• /
• pp.611-618
• /
• 2008

CFRP (carbon fiber reinforced polymer) 긴장재는 PS 강연선의 부식문제를 해결하기 위해 대안으로 사용될 수 있다. CFRP 긴장재는 횡방향 압력 및 응력집중에 취약하므로 기존의 PS 강연선에 적용되는 정착시스템의 적용은 조기파괴 등으로 인하여 믿을만한 내하성능을 주지 못한다. 따라서 CFRP 긴장재를 정착하기 위한 알맞은 정착장치의 개발이 필요하다. CFRP 긴장재용 정착구의 주된 형태는 쐐기형, 부착형 및 압착형으로 구분되며 이들 형태는 CFRP 긴장재에서 발생되는 조기파단을 방지하고 국부응력을 적절히 분산시키기 위한 목적으로 개발되고 있다. 본 논문은 CFRP 긴장재를 정착시키기 위해 압착형 정착방식을 적용하여 응력집중을 완화시키기 위해 슬리브 내외경에 변단면을 적용하고, 변단면 길이에 따른 압착형 정착구의 정착성능을 고찰하였다. 실험결과 정착구의 성능은 슬리브 제원과 압착력에 크게 좌우되는 것으로 나타났고, 응력완화구간을 갖는 슬리브는 응력집중을 감소시키는 것으로 나타났다.

• Elastomers and Composites
• /
• 제49권4호
• /
• pp.293-304
• /
• 2014

고무 공기 스프링(rubber air spring)은 자동차, 철도차량 등 수송기기의 서스펜션 장치로 사용되고 있다. 고무 공기 스프링은 고무 에어백의 압축과 팽창을 통한 탄성효과로 스프링의 역할을 한다. 고무 공기 스프링의 주요 구성요소 중 하나가 고무 슬리브(rubber sleeve)이다. 고무 슬리브는 주요 구성성분인 클로로프렌 고무와 나일론 6 코드 간의 접착이 매우 중요하다. 본 연구에서는 첨가제의 영향을 고려한 고무 슬리브의 최적 배합조성과 조건을 찾기 위해 다양한 물성시험을 하였다. 또한, 보강섬유의 최적 배향을 선정하기 위해 유한요소해석법을 이용한 수치해석을 수행하였다. 고무 공기 스프링을 제조하여 실제 차량에 장착하여 기초물성과 피로수명 및 기밀성을 시험하였다.

• 한국의류학회지
• /
• 제40권5호
• /
• pp.775-787
• /
• 2016

This study examined the wearing conditions of compression wear for weight training. Compression wear has recently received significant attention from the public and athletes as high-level functional sportswear. The survey was conducted on 373 men in their 20s for general information on purchase behavior, preferred brand, function, and preferred design. The majority of participants (n=181) were aware of the function of compression wear. The most selected reason for wearing compression wear was for its convenience during sports activities. Respondents had the greatest preference for designs with a round neckline, regular leggings type, upper arm-length sleeve, and thigh-length bottom. Respondents also wanted a stronger compression in the core muscle part (abdomen, back, and waist).

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.183-191
• /
• 2022

The purpose of this study, the wearing conditions of functional pressure clothing applied with the thermotherapy device were determined by three types (NW, CW, TCW) and the difference in isokinetic strength, muscle activity around the forearm was investigated and the effects of products mixed with thermotherapy and pressure treatment were verified. Ten men in their 20s were selected as subjects, and all subjects were randomly assigned three wearing conditions, and wrist flexion/extension exercise was performed at 30° and 90° angular velocity in isokinetic equipment. Peak torque, average power, and EMG were measured during exercise in all conditions. For peak torque, CW was significantly highest at velocity of 30°/sec flexion. Average power showed no significant difference by condition. In the angular velocity of 90°/sec, flexion was significantly higher in CW and TCW than in NW. As a result, wearing clothes with pressure effect and heat effect can show high efficiency in high muscle strength development and fast contraction activity during low speed exercise, and it is thought that it can show improvement of exercise ability through efficient recruitment of motor unit.

• 한국강구조학회 논문집
• /
• 제24권3호
• /
• pp.245-256
• /
• 2012

본 연구는 SC 벽체의 구조적 성능에 개구부가 주는 영향을 평가하는 목적으로 하였다. SC구조의 실험체는 개구부가 있는 실험체와 없는 실험체로 구분하였으며 개구부형상은 정사각형으로 개구부 주변의 보강과 비보강 그리고 슬리브두께를 변수로 계획하였다. 실험체의 공통된 파괴양상은 강판의 좌굴이 스터드와 스터드 사이에서 발생한 후 콘크리트의 균열이 진행되는 형태이며 개구부의 파괴형태는 수직 슬리브 벽이 개구부 안쪽으로 좌굴되는 파괴형태를 보여주었다. 또한 개구부의 슬리브 유무에 따라 강판좌굴 하중은 비슷하지만 최대압축강도는 슬리브가 있는 것이 크게 나타났다.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.747-754
• /
• 2004

The nonlinear finite element analysis for deformation characteristics of a power steering hose during the swaging process is performed in order to investigate the stress and the strain levels of the hose components. Power steering hose consists of components such as rubber hose, nylon, nipple and sleeve. Moreover, the numerical analysis requires the consideration of material, geometry and boundary nonlinearities. To evaluate the rubber hose strength, the measured stresses and strains are compared with tension and compression test data. Contact force is also a principal factor to examine whether rubber hose is break away from sleeve and nipple or not.