• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.91-101
• /
• 1997

The demand for handling images in digital form has increased dramatically in recent years. Digital image compression is required to store and transmit mass information in different from general information. JPEG(Joint Photographic Experts Group) committee founded by CCITT and ISO is define the still-image standard compression/restoration algorithm. JPEG is proposed the standard of grayscale and color still-image compression/restoration. In the image quality, JPEG is applicable to the various applications in which compression is able to from 1/10 to 1/50 without the visible obstacle. In this paper, we proposed that the proposed method enhance the compression ratio which is reducing the higher frequency in order to increasing the spatial redundancy in the image. The proposed method is using the low pass filter in order to reducing the higher frequency. The low-pass filters are using the median filter and convolution filter in the spatial domain, FFT filter in the frequency domain. We acquired the additive compression ratio reducing the higher frequency using the low-pass filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.76.2-76
• /
• 2001

In this paper, a new fusion architecture consisting of a host filter and a do-correlated compression filter is proposed based on propagated measurement fusion. In the proposed architecture, the host filter estimates the system states in long-term sense based on the measurements from the beginning to the current time. The de-correlated compression filter assists the host filter by providing fusion results in short-term sense based on the measurements within a block of time. The proposed de-correlated compression filter alleviates computational burden of the host filter by reducing the maximum amount of instantaneous computation, and provides an efficient environment for real-time fault detection and estimation.

• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.185-190
• /
• 2006

JPEG 2000 is used as an alternative to solve the blocking artifact problem with the existing still image compression JPEG algorithm. However, it has shortcomings such as longer floating point computation time and more complexity in the procedure of enhancing the image compression rate and decompression rate. To compensate for these we implemented with hardware the JPEG 2000 algorithm's filter part which requires a lot of floating point computation. This DWT Filter[1] chip is designed on the basis of Daubechies 9/7 filter[6] and is composed of 3-stage pipeline system to optimize the performance and chip size. Our implemented Filter was 7 times faster than software based Filter in the floating point computation.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.912-915
• /
• 2002

In this report, we propose a non-separable two-dimensional (2D) Lossless Wavelet Transform (LWT) for image compression. Filter characteristics of our proposed LWT are the same as those or conventional 2D LWT based on applying 1D LWT twice but our coding performance is better due to reduction of rounding effects. Simulation results confirm effectiveness of our proposed LWT.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.715-724
• /
• 2000

This Paper presents 3-D subband filter banks which are effective for progressive and lossless compression of volumetric images. For such a purpose, ORT(Overlapping Rounding Transform), applied so far to 1-D losslesssubband filter banks, is now used to implement two types of 3-D lossless subband filter banks: separable andnon-separable types. Separable fiter banks are implemented form applying 1-D lossless filter banks consecutively.Non-separable later banks are developed by expanding the 1-D ORT into 3-D one. In particular, the proposed ORT based 3-D non-separable filter banks generalizes the 3-D HINT(Hierarchical INTerpolation) algorithm.Through the experiment comparisons on various volumetric medical images, we prove that the proposedseparablefnon-separable filter banks perform better, in terms of compression ratio (first order entropy), than theother lossless compression techniques such as block based transform and conventional 3-D HINT.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.7-12
• /
• 2009

In JPEG2000, the Cohen-Daubechies-Feauveau (CDF) 9/7-tap wavelet filter adopted in lossy compression is implemented by the lifting scheme or by the convolution scheme while the LeGall 5/3-tap wavelet filter adopted in lossless compression is implemented just by the lifting scheme. However, these filters are not optimal in terms of Peak Signal-to-Noise Ratio (PSNR) values, and irrational coefficients of wavelet filters are complicated. In this paper, we proposed a method to optimize image quality based on wavelet filter design and on wavelet decomposition. First, we propose a design of wavelet filters by selecting the most appropriate rational coefficients of wavelet filters. These filters are shown to have better performance than previous wavelet ones. Then, we choose the most appropriate wavelet decomposition to get the optimal PSNR values of images.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.173.1-173.1
• /
• 2011

The high fuel flexibility of gas turbine power system has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and sewage waste water as a fuel for gas turbines has increased. We investigated the performance of high pressure biogas compression system and operating conditions for supplying biogas. The total flow per minute of biogas from food waste water digestion tank is $54Nm^3$. The main type of biogas compression system is the reciprocating system and screw type system. The target of biogas mechanical data is the as belows; inlet pressure 0.045bar, supplying biogas temperature is $30{\sim}60^{\circ}C$, and final pressure is above the 25 bar. Also, inlet conditions of biogas consist of CH4 48.5%~83%, $H_2S$ Max. 500ppm, $NH_3$ Max. 1,500ppm and Siloxane 2.7~4.6ppm. The boosting Blower system raises a pressure from 0.045bar to 1bar before main compressor. The main system lay out of reciprocating consisits of compressor driver, filter, cooling system, blowdown vessel, control system and ESD(Emergency Shut Down) system. And an enclosure package needs to be installed for reducing noise up to 75dB. The system driver is the electronic motor of explosion proof type. Forthe compressor system reliable operation, the cleaning system something like particulate filter needs to be set up in the inlet of compressor and Coalescing Filter in the outlet of compressor. Particulate Filter has to be removed above $10{\mu}m$ size of the particles in biogas. The coalescing filter(Micofine Borosilicate Glass Fibers Filter treated phenol acid) also removes moisture and oil of above $0.3{\mu}m$ to be involved in high pressure biogas up to 90%~98%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.475-481
• /
• 2021

The on-board processor of satellite Synthetic Aperture Radar(SAR) digitizes the back-scattered echoes and transmits them to the ground. As satellite SAR image of various operating conditions including broadband and high resolution is required, an enormous amount of SAR data is generated. Decimation filter is used for data compression to improve the transmission efficiency of these data. Decimation filter is implemented with the FIR(Finite Impulse Response) filter and here, the decimation ratio and tap length are constrained by resource requirements of FPGA used for implementation. This paper suggests to use a non-integer ratio decimation filter in order to optimize the data transmission efficiency. Also, it proposes a filter design method that remarkably reduces the resource constraints of the FPGA in-use via applying a polyphase filter structure. The required resources for implementing the proposed filter is analysed in this paper.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.55-59
• /
• 2007

Wavelet Transform is amenable to efficient algorithms. So wavelet transform was adopted many signal processing and communication applications. For example, the wavelet transform was adopted as the transform for JPEG2000. However, Wavelet has weakness about smoothness along the contours and limited directional information. Hence, recently, some new transforms have been introduced to take advantage of this property. So we use to other transform, called contourlet transform in compression. In this paper, we propose a new method for image compression based on the contourlet transform, which has been recently introduced. Contourlet transform has a good result about images with smooth contours. Moreover, Contourlet is feasible multiresolution and multidirection expansion using non-separable filter bank. This treatise shows a good image representation after compressing using contourlet transform.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.982-987
• /
• 2007

The necessity of data compression scheme for volume data has been increased because of the increase of data capacity and the amount of network uses. Now we have various kinds of compression schemes, and we can choose one of them depending on the data types, application fields, the preferences, etc. However, the capacity of data which is produced by application scientists has been excessively increased, and the format of most scientific data is 3D volume. For 2D image or 3D moving pictures, many kinds of standards are established and widely used, but for 3D volume data, specially time-varying volume data, it is very difficult to find any applicable compression schemes. In this paper, we present a compression scheme for encoding time-varying volume data. This scheme is aimed to encoding time-varying volume data for visualization. This scheme uses MPEG's I- and P-frame concept for raising compression ratio. Also, it transforms volume data using Daubechies D4 filter before encoding, so that the image quality is better than other wavelet-based compression schemes. This encoding scheme encodes time-varying volume data composed of single precision floating-point data. In addition, this scheme provides the random reconstruction accessibility for an unit, and can be used for compressing large time-varying volume data using correlation between frames while preserving image qualities.