• 자동차안전학회지
• /
• 제13권2호
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).

• Korean Chemical Engineering Research
• /
• 제59권3호
• /
• pp.305-315
• /
• 2021

교합형 동방향이축압출기는 고분자재료의 컴파운딩에 주로 사용되는 기계이다. 이축압출기는 가공하는 재료와 생산제품에 적합한 스크류 조합을 설계하여 품질과 생산성이 양호한 컴파운딩공정을 구축할 수 있다. 스크류조합을 구성하는 스크류와 니딩 엘리먼트의 종류, 형상 및 사양에 대하여 정리하였고, 각각의 엘리먼트가 조합될 때 고분자 수지의 가공성에 미치는 영향에 대하여 알아보았다. 범용수지의 대량생산에 보편적으로 적용되는 스크류 조합의 원리를 설명하였고, 피딩, 용융혼련 및 미터링영역에 적합한 스크류조합의 방향과 사례를 나열하였다. 액상첨가제나 무기필러의 사이드피딩, 반응압출, 탈기공정, 밝은 색상과 투명도가 요구되는 제품의 생산 및 겉보기비중이 낮은 재료의 가공 등 각각의 경우에 맞는 스크류조합의 방향과 원리를 제시하였다.

• Journal of information and communication convergence engineering
• /
• 제9권6호
• /
• pp.747-752
• /
• 2011

The position detection of overlapping area in the interframe for image stitching using auto and cross correlation function (ACCF) and compounding one image with the stitching algorithm is presented in this paper. ACCF is used by autocorrelation to the featured area to extract the filter mask in the reference (previous) image and the comparing (current) image is used by crosscorrelation. The stitching is detected by the position of high correlation, and aligns and stitches the image in shifting the current image based on the moving vector. The ACCF technique results in a few computations and simplicity because the filter mask is given by the featuring block, and the position is enabled to detect a bit movement. Input image captured from CMOS is used to be compared with the performance between the ACCF and the window correlation. The results of ACCF show that there is no seam and distortion at the joint parts in the stitched image, and the detection performance of the moving vector is improved to 12% in comparison with the window correlation method.

• 한국응용과학기술학회지
• /
• 제32권2호
• /
• pp.320-325
• /
• 2015

Flow mark is a sort of surface defect on the composite that can arise during the filling stage of the injection molding process. The purpose of this study is to clarify a mechanism of the flow mark which appears on the surface of injection molded Polypropylene (PP) through the characterization of the surface structure. The materials used in this report are PP/rubber and PP/talc compounding, which are widely used in automobile part. The flow mark shows two different constitutions, such as a luster part and a cloud part on the surface of the injection molded PP. We have investigated the surface structure of PP/rubber and PP/talc composites by using scanning electron microscope (SEM), energy dispersive x-ray spectroscopy (EDAX) and optical microscopy (OM). As a result, the cloud part contains higher contents of the rubber and talc compare to the luster part.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.309-312
• /
• 2002

The polymer nanocomposites are attracting considerable attention on account of the characteristic properties of nanoparticles have extremely large surface area per a unit mass. Recentry, mica-type silicates like montmorillonite have received a good deal of attention as effective nano-reinforcemen(1), but actually some critical problems such as the difficulties of exfoliation and surface modification, the weak heat-resistance of modifier, and inferior processability due to the increase in melt viscosity have restricted the mass production and various applications of the nanocoposite. (omitted)

• 대한토목학회논문집
• /
• 제7권1호
• /
• pp.111-120
• /
• 1987

부족량의 지속기간에 따른 성질을 관측하여, 다년간 계속되는 가뭄의 크기와 심도에 관한 빈도분석 방안을 개발하였다. 평균 부족량의 변화를 식별하기 위하여, 월 부족량의 통계치에 의한 표준화와 자료의 통합과정이 시행되었다. 가뭄의 크기와 심도에 관한 매개변수를 추정하기 위하여, Gamma 분포함수의 재생산성이 부족량에 대하여 적용되었다. 이들 분포와 지속기간 분포와의 복합화 맞 연구 결과가 실시간 예측에 관하여 의미하는 바를 논의하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.195-198
• /
• 2001

To improve the properties of FRP composite materials, the hybrid prepreg with non-woven tissue (NWT) is developed. The hybrid prepreg consists of undirectional prepreg and NWT prepreg. The NWT prepreg is made by compounding the NWT and polymer resin, which is similar to the production method of FRP prepreg. The NWT has short fibers which are discretely distributed with in-plane random orientation. The stiffness and strength of NWT composites are lower than those of continuously fibrous composites. The strengthening technique and fabricating technique for the hybrid prepreg are described in this work. The mechanical characteristics of hybrid composites with NWT are discussed and compared with those of the FRP composites.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.502-506
• /
• 2001

This paper presents a new method for cutting steel with a diamond tool using electrolysis. The electrolysis is adopted in the diamond cutting to prevent the high chemical activity between a diamond tool and an iron-based workpiece. The basic principle of the method is to oxdize a thin substrate of the workpiece by electrolysis ahead of the diamond tool which cuts the oxidized layer. A desired shape can be obtained by repeating this process. The cutting force is reduced because the diamond tool removes only the weakened material by electroysis. The reduction of the cutting force suppresses the excessive wear of the diamond tool. The oxidization penetrates several micrometers in depth along the previously formed shape. The corrosion rates depend on current density and make suggestions on the optimum cutting conditions.

• 한국식생활문화학회지
• /
• 제20권1호
• /
• pp.61-67
• /
• 2005

The purpose of study was to determine the organoleptic characteristics of homemade basil-pasta made in various compounding ratio according to central composite design. The optimum mixing condition for basil-pasta was optimized by response surface methodology. The texture, including color, flavor, elasticity and overall quality, was measured as sensory evaluation. The optimum mixing rates of durum wheat semolina, basil and egg were 73.97g, 5.95g and 36.17g for color, 53.14g, 4.52g and 35.85g for flavor, 48.75g, 2.95g and 36.85g for elasticity. The organoleptic overall quality of basil-pasta showed the maximum score in the mixing condition of 55.52 g durum wheat semolina, 4.55g basil paste and 35.51g egg.

• 한국식품조리과학회지
• /
• 제22권1호
• /
• pp.1-11
• /
• 2006

To determine the optimal mixing conditions of Noni jelly, samples were prepared with various compounding ratios of Noni juice(120, 160, 200, 240 and 280 g), gelatin(12, 16, 20, 24 and 28 g) and sucrose(80, 100, 120, 140 and 160 g) using a central composite design. Physical and sensory evaluations were performed and the results analyzed using response surface methodology. The optimum mixing rate satisfying sensory items was Noni juice 192 g, gelatin 18.25 g and sucrose 135 g.