• Title/Summary/Keyword: compound unit

Search Result 275, Processing Time 0.033 seconds

Synthesis of Polyurethane Emulsion Modified with Phosphorus Compounds (인 변성 폴리우레탄 에멀젼의 합성에 관한 연구)

  • Wu, Jong-Pyo;Cho, Sun-Young
    • Journal of the Korean Applied Science and Technology
    • /
    • v.20 no.4
    • /
    • pp.275-282
    • /
    • 2003
  • Aqueous polyurethane dispersion was synthesized using phosphorus compound which received significant attention for the replacement of halogenated flame retardants. In this study, polyols which have phosphorus moity in their structural unit were synthesized by two-step polycondensation reaction using dimethyl phenylphosphonate, ethylene glycols. adipic acid, and 1,4-butanediol. In the next step, polyurethane dispersion was prepared using these polyols, isophorone diisocyanate with dimethyl propionic acid. The particle size of polyurethane latex was reduced from 347 nm to 240 nm with increasing DMPA content. It was observed that the LOI values of prepared coatings increased from 27% to 35% with increasing phosphorus content.

Lsolation of Diterpene acid from Anisotome Lyallii

  • Lim Jin A;Choi Young;Oh In Kio;Kim Hyung Min;Kim Young Ok;Perry Nigel B;Baek Seung Hwa
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.17 no.4
    • /
    • pp.1112-1115
    • /
    • 2003
  • The diterpene acid 1 was isolated from the roots of Anisotome lyallii(Apiaceae/Umbelliferae). The structure of the compound was elucidated as anisotomenoic acid 1 on the basis of spectroscopic methods. This compound was evaluated against P388 murine leukaemia and B 16/F10 melanoma cells.

Synthesis and Characterization of $Ta_2Ni_3Se_8$

  • 동용관;도정환;윤호섭;이영주;신희균;류광경
    • Bulletin of the Korean Chemical Society
    • /
    • v.16 no.9
    • /
    • pp.870-873
    • /
    • 1995
  • A new ternary transition-metal selenide, Ta2Ni3Se8 has been synthesized from a eutectic halide flux. The structure of this phase has been characterized by single crystal X-ray diffraction techniques. The compound crystallizes in the orthorhombic system (D2h9-Pbam, a= 14.788(4) Å, b= 10.467(3) Å, c=3.4563(8) Å) with two formula units in the unit cell. This compound adopts the Nb2Pd3Se8 structure type. Hence, there are two chains of edge-sharing selenium trigonal prisms centered by tantalum atoms and these chains are interconnected through two kinds of nickel atoms. Nickel occupies both square planar and square pyramidal sites as does palladium in Nb2Pd3Se8. Electrical conductivity measurements indicate that this material is semiconducting.

In vitro antioxidative and anti-inflammatory effects of the compound K-rich fraction BIOGF1K, prepared from Panax ginseng

  • Hossen, Muhammad Jahangir;Hong, Yong Deog;Baek, Kwang-Soo;Yoo, Sulgi;Hong, Yo Han;Kim, Ji Hye;Lee, Jeong-Oog;Kim, Donghyun;Park, Junseong;Cho, Jae Youl
    • Journal of Ginseng Research
    • /
    • v.41 no.1
    • /
    • pp.43-51
    • /
    • 2017
  • Background: BIOGF1K, a compound K-rich fraction prepared from the root of Panax ginseng, is widely used for cosmetic purposes in Korea. We investigated the functional mechanisms of the anti-inflammatory and antioxidative activities of BIOGF1K by discovering target enzymes through various molecular studies. Methods: We explored the inhibitory mechanisms of BIOGF1K using lipopolysaccharide-mediated inflammatory responses, reporter gene assays involving overexpression of toll-like receptor adaptor molecules, and immunoblotting analysis. We used the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay to measure the antioxidative activity. We cotransfected adaptor molecules, including the myeloid differentiation primary response gene 88 (MyD88) and Toll/interleukin-receptor domain containing adaptor molecule-inducing interferon-${\beta}$ (TRIF), to measure the activation of nuclear factor (NF)-${\kappa}B$ and interferon regulatory factor 3 (IRF3). Results: BIOGF1K suppressed lipopolysaccharide-triggered NO release in macrophages as well as DPPH-induced electron-donating activity. It also blocked lipopolysaccharide-induced mRNA levels of interferon-${\beta}$ and inducible nitric oxide synthase. Moreover, BIOGF1K diminished the translocation and activation of IRF3 and NF-${\kappa}B$ (p50 and p65). This extract inhibited the upregulation of NF-${\kappa}B$-linked luciferase activity provoked by phorbal-12-myristate-13 acetate as well as MyD88, TRIF, and inhibitor of ${\kappa}B$ ($I{\kappa}B{\alpha}$) kinase ($IKK{\beta}$), and IRF3-mediated luciferase activity induced by TRIF and TANK-binding kinase 1 (TBK1). Finally, BIOGF1K downregulated the NF-${\kappa}B$ pathway by blocking $IKK{\beta}$ and the IRF3 pathway by inhibiting TBK1, according to reporter gene assays, immunoblotting analysis, and an AKT/$IKK{\beta}$/TBK1 overexpression strategy. Conclusion: Overall, our data suggest that the suppression of $IKK{\beta}$ and TBK1, which mediate transcriptional regulation of NF-${\kappa}B$ and IRF3, respectively, may contribute to the broad-spectrum inhibitory activity of BIOGF1K.

Shear Fracture Behavior of Anchor Systems for Shock Transmission Unit in RC Bridge (철근콘크리트 교량의 충격전달장치 앵커시스템의 전단파괴거동)

  • 김태상;송하원;변근주;안창모
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2001.11a
    • /
    • pp.1097-1102
    • /
    • 2001
  • Seismic safety of continuous span concrete bridge can be enhanced by distributing a large seismic lateral load to each supporting pier. A new viscoelastic device called Shock Transmission Unit(STU), which is a simple cylinder-piston assembly packed with a so-called silicone putty compound, enables the lateral seismic load to be transmitted to the pier by installation of the device to movable bearings of the bridge. The seismic safety of concrete bridges having the STU depends on not only safety of the bridges globally but also safety of anchor systems which anchors the STU to concrete pier. An experimental investigation is performed to study the behavior of cast-in-place anchor and post-installed anchor subjected to shear load statically and cyclically according to different edge distance, embedment length, and anchor spacing. Finally, the experimental results are compared with results by design methods of ACI and CCD, and results by FEM analysis.

  • PDF

[ $P_{\lambda,;,T}^M-policy$ ] of a finite dam with both continuous and Jumpwise inputs

  • Lim Kyung Eun;Baek Jee Seon;Lee Eui Yong
    • Proceedings of the Korean Statistical Society Conference
    • /
    • 2004.11a
    • /
    • pp.123-128
    • /
    • 2004
  • A finite dam under $P_{\lambda,;,T}^M-policy$ is considered, where the input of water is formed by a Wiener process subject to random jumps arriving according to a Poisson process. Explicit expression is deduced for the stationary distribution of the level of water. And the long-run average cost per unit time is obtained after assigning costs to the changes of release rate, a reward to each unit of output, and a penalty which is a function of the level of water in the reservoir.

  • PDF

Evaluation in Performance of High Voltage Cable for BLU of TFT-LCD by Improvement for Material and Manufactured Process (TFT-LCD BLU용 고압 케이블의 재료특성 및 제조공정 개선을 통한 성능 향상)

  • Chung, Jin-Do;Kim, Jae-Hoon;Koo, Kyung-Wan;Hwang, Seung-Min
    • The Transactions of the Korean Institute of Electrical Engineers P
    • /
    • v.58 no.4
    • /
    • pp.495-498
    • /
    • 2009
  • To improve the efficiency of the high voltage cable for BLU(backlight unit) of TFT-LCD(Thin Film Transistor-Liquid Crystal Display), the analysis for the trial products(UL3239, UL3633) is conducted by using SEM(scanning electron microscope) and EDX(Energy Dispersive X-ray Spectroscopy). The result that it is possible to accumulate the know-how to about stranding pitch through effective improvement of stranding process. The troubles which are the badness of withstanding voltage and tensile strength etc. are solved by development of excellent material. Furthermore, phenomenon of conductor unfasten in the harness work is solved by improvement of the stranding wire process.

The Economic Design of VSS $\bar{x}$ Control Chart for Compounding Effect of Double Assignable Causes (두 가지 복합 이상원인 영향이 있는 공정에 대한 VSS$\bar{x}$관리도의 경제적 설계)

  • Sim Seong-Bo;Kang Chang-Wook;Kang Hae-Woon
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.27 no.2
    • /
    • pp.114-122
    • /
    • 2004
  • In statistical process control applications, variable sample size (VSS) $\bar{X}$ chart is often used to detect the assignable cause quickly. However, it is usually assumed that only one assignable cause results in the out-of-control in the process. In this paper, we propose the algorithm to minimize the function of cost per unit time and compare the economic design and the statistical design by use of the value of cost per unit time. We consider double assignable causes to occur with compound in the process and adopt the Markov chain approach to investigate the statistical properties of VSS $\bar{X}$ chart. A procedure that can calculate the control chart's parameters is proposed by the economic design.

Optical and Optoelectric Properties of PbCdS Ternary Thin Films Deposited by CBD

  • Mohammed, Modaffer. A.;Mousa, Ali M.;Ponpon, J.P.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.9 no.2
    • /
    • pp.117-123
    • /
    • 2009
  • $Pb_{x}Cd_{1-x}S$ films are prepared in the composition range of 0.05${\leq}x{\leq}$0.25, using a chemical bath deposition growth technique under optimum conditions amide at realizing good photo response. The x-ray diffraction results show that the films are of PbS-CdS composite with individual CdS and PbS planes. The films exhibit two direct band gaps, 2.4 eV attributed to CdS, while the other varies continuously from 2.4 eV to 1.3 eV. The films surface morphology is smooth with crystallite, whose grain size increases with increasing mole fraction (x). The decrease in band gap with increase in lead concentration suggests inter-metallic compound of PbS (Eg=0.41 eV) with CdS (Eg=2.4 eV)

Design of Pipelined Floating-Point Arithmetic Unit for Mobile 3D Graphics Applications

  • Choi, Byeong-Yoon;Ha, Chang-Soo;Lee, Jong-Hyoung;Salclc, Zoran;Lee, Duck-Myung
    • Journal of Korea Multimedia Society
    • /
    • v.11 no.6
    • /
    • pp.816-827
    • /
    • 2008
  • In this paper, two-stage pipelined floating-point arithmetic unit (FP-AU) is designed. The FP-AU processor supports seventeen operations to apply 3D graphics processor and has area-efficient and low-latency architecture that makes use of modified dual-path computation scheme, new normalization circuit, and modified compound adder based on flagged prefix adder. The FP-AU has about 4-ns delay time at logic synthesis condition using $0.18{\mu}m$ CMOS standard cell library and consists of about 5,930 gates. Because it has 250 MFLOPS execution rate and supports saturated arithmetic including a number of graphics-oriented operations, it is applicable to mobile 3D graphics accelerator efficiently.

  • PDF