• Resources Recycling
• /
• v.32 no.1
• /
• pp.21-32
• /
• 2023

Because the application of lithium has gradually increased for the production of lithium ion batteries (LIBs), more research studies about recycling using solvent extraction (SX) should focus on Li⁺ recovery from the waste solution obtained after the removal of the valuable metals nickel, cobalt and manganese (NCM). The raffinate obtained after the removal of NCM metal contains lithium ions and other impurities such as Na ions. In this study, we optimized a selective SX system using di-(2-ethylhexyl) phosphoric acid (D2EHPA) as the extractant and tri-n-butyl phosphate (TBP) as a modifier in kerosene for the recovery of lithium from a waste solution containing lithium and a high concentration of sodium (Li⁺ = 0.5 ~ 1 wt%, Na⁺ = 3 ~6.5 wt%). The extraction of lithium was tested in different solvent compositions and the most effective extraction occurred in the solution composed of 20% D2EHPA + 20% TBP + and 60% kerosene. In this SX system with added NaOH for saponification, more than 95% lithium was selectively extracted in four extraction steps using an organic to aqueous ratio of 5:1 and an equilibrium pH of 4 ~ 4.5. Additionally, most of the Na⁺ (92% by weight) remained in the raffinate. The extracted lithium is stripped using 8 wt% HCl to yield pure lithium chloride with negligible Na content. The lithium chloride is subsequently treated with high purity ammonium bicarbonate to afford lithium carbonate powder. Finally the lithium carbonate is washed with an adequate amount of water to remove trace amounts of sodium resulting in highly pure lithium carbonate powder (purity > 99.2%).

• Journal of architectural history
• /
• v.32 no.3
• /
• pp.7-20
• /
• 2023

The compositions of ethnic groups in Macau vary with time. Prior to the opening of the port, the majority of the residents in Macau were Chinese people, including those living on land and at sea. After the port was opened, with the increase of Portugal businessmen and missionaries, the population was divided into Chinese people and foreigners (so-called 'Yiren' or 夷人 in Chinese). Chinese people living on land were mainly of Hakka, Fujian, and Cantonese descent. Those living at sea were referred to as 'Tanka People' (named 'Danmin' or 蜑民in Chinese). They lived on floating boats for their entire lives and were similar to the 'drifters' in Japan. Since modern times, many refugees from mainland China and Southeast Asia flooded into Macau due to warfare. The development of industrialization required a larger number of laborers, and some 'coolies' entered Macau in legal or illegal ways, making it a multi-ethnic city. However, the Tanka people were not considered a minority ethnic group under the national ethnic policy of 56 ethnic groups since they did not have an exclusive language and shared dialects in different regions. As the ports inhabited by Tanka people gradually restored foreign trade, the boats and stilt houses used by Tanka people were dismantled to expand the infrastructure area of the ports. Many Tanka people began to live on land and marry people on land, leading to the disappearance of the Tanka group in Macau. The fishing boats and stilt houses used by Tanka people have also disappeared, with only a few remaining in areas such as Pearl River Delta and Hong Kong. This paper examines the natural and social environment of Tanka people in Macau from the Ming and Qing dynasties to the Republic of China, as well as the adaptive changes they adopted for the aforementioned environment in terms of living space and architectural type, on the basis of summarizing the historical activities of Tanka people. Finally, this study provides a layout plan and interior structure of the most commonly used boat for Tanka people from the Ming and Qing dynasties to the Republic of China, with the use of CAD and other technical software, along with reference to written historical documentation, and provides a case study for further research on the architectural history of Macau's inner harbor cities, from anthropological and folklore perspectives.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.472-478
• /
• 2023

In this study, the acetaldehyde removal characteristics of activated carbon (AC) for air purifier filters were investigated using metal catalysts-impregnation and functional group-modification method. The AC with a high specific surface area(1700 m²/g) and micropores was prepared by KOH activation of coconut charcoal and the efficiency of catalyst and functional group immobilization was examined by varying the drying conditions within the pores after immersion. The physical properties of the prepared activated carbon were analyzed by BET, ICP, EA, and FT-IR, and the acetaldehyde adsorption performances were investigated using gas chromatography (GC) at various impregnation and modified conditions. As the concentration of impregnation solution increased, the amount of impregnated metal catalysts increased, while the specific surface area showed a decreasing trend. The adsorption tests of the metal catalyst-impregnated and functional group-modified activated carbons revealed that excellent adsorption performance in compositions MgO10@AC, CaO10@AC, EU10@AC, and H-U3N1@AC, respectively. The MgO10@AC, which showed the highest adsorption performance, had a breakthrough time of 533.8 minutes and adsorption capacity of 57.4 mg/g for acetaldehyde adsorption. It was found that the nano-sized MgO catalyst on the activated carbon improved the adsorption performance by interacting with carbonyl groups of acetaldehyde.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.71-75
• /
• 2023

In this study, inorganic perovskite films with different compositions were grown by thermal chemical vapor deposition depending on the substrate and their optical properties were compared. Inorganic perovskite crystals were grown on SiO₂/Si and c-Al₂O₃ substrates using CsBr and PbBr₂, respectively, under the same growth conditions. Cs₄PbBr₆-CsPbBr₃ crystallites were grown on the SiO₂ with polycrystalline structure, while a CsPbBr₃ (100) dominant thin film was formed on the c-Al₂O₃ substrate with single crystal structure. From the photoluminescence measurement, CsPbBr₃ showed typical green emission centered at 534 nm with a full width at half maximum (FWHM) of about 91 meV. The Cs₄PbBr₆-CsPbBr₃ mixed structure exhibits blue-shifted emission at 523 nm with a narrow FWHM of 63 meV and a fast decay time of 6.88 ns. These results are expected to be useful for application in photoelectric devices such as displays, solar cells, and light sensors based on inorganic metal perovskites.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.147-154
• /
• 2007

Sweat contents were investigated for using those data to forensic purpose. The experiments of identifying sweat contents were as follow: 1) measurement of amino acids (aspartic acid, serine, glycine etc) by HPLC, 2) anions ($Cl^-$, $F^-$, and $SO{_4}^{2-}$) by IC and 3) trace elements (Cu, Zn, Li, B, etc.) by ICP-MS. Amino acid contents in sweat are varied with individual samples and glycine, threonine, alanine, valine and histidine are detected as the prime one. The detected anions are $Cl^-$(2167~4073 ppm) and $F^-$(454~582 ppm) mostly. Trace elements of Rb, Zn and Cu are detected and those concentrations are relatively very high. The compositions of sweat can be influenced by various factors (diet, anthropometric, characteristics, physical fitness, age, gender and the state of the health).

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.33-40
• /
• 2008

Accuracy of dietary assessment depends on correct estimation of quantity as well as correct data on composition of the products. Milk and soymilk were considered quite homogeneous in items of package size and composition. One serving size of fluid milk and soymilk is considered 200 mL but there are products with different amounts on the market. This study was conducted to investigate variations of amounts and composition of fluid milk and soymilk products of one portion siz on Korean market. Twenty-nine milk products were purchased and categorized into 8 groups-regular, low-fat, skim, chocolate, strawberry-flavored, banana-flavored, and black soybean-added. Sixteen fluid soymilk products were purchased and categorized into 4 groups-regular, infant, black sesame or black soybean added and others. Actual volume of each product was measured by mass cylinder and compositions of major nutrients on the package were compared to the values in the most widely used nutrient DB in Korea. Amounts of milk specified on the package of purchased products were 182.3-318.5 ml, the largest being banana-flavored milk. Amounts of soy milk were 184.3-240.5 mL, the largest being regular soymilk. Measured amount of each products were close to the amount on the package (<5%). Contents of macronutrients on the package were different from the food composition table in several products. The amounts of calcium varied greatly among the products due to the popularity of adding calcium to milk and soymilk products recently. These variations in the amount and contents of major nutrients in milk and soymilk products can lead to considerable error to the results of dietary assessment unless the amount and the composition of each product are regularly updated in the food composition table whenever the new products are introduced in the market.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.2
• /
• pp.10-13
• /
• 2023

High-T_C superconductivity (HTSC) has been the central issue in the field of condensed matter physics for decades. An essential part of the research on superconductivity is finding new exotic superconductors. It was recently suggested that Ir-substituted La_0.7Sr_0.3MnO₃ (LSMIO) is a new high-T_C superconductor. However, systematic studies to experimentally verify the superconductivity have not been done. Here, we report the growth processes of LSMIO thin films and their electrical transport properties. We observed a clear negative correlation between the intensity of the laser utilized for film deposition and the Curie temperature of the deposited film. We attributed this effect to the suppression of Sr concentration in the LSMIO films as the laser intensity increased. However, our LSMIO films show conventional ferromagnetism instead of HTSC. To realize the HTSC in LSMIO systems, further exploration of diverse compositions of LSMIO compounds is essential.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.57.4-58
• /
• 2021

Asteroids have undergone various processes such as impacts, space weathering, and thermal evolution. Because they expose their surfaces to space without atmosphere, these evolutional processes have been recorded directly on their surfaces. The remote-sensing observations have been conducted to reveal these evolutional histories of the target asteroids. For example, crater and boulder distributions are unambiguous evidence for past nondestructive impacts with other celestial bodies. Multiband and spectroscopic observations have revealed space-weathering history (as well as compositions). Whereas most physical quantities have been examined intensively using spacecraft and telescopes, only a little has been studied on "the grain size". It is one of the fundamental physical quantities for diagnosing the collisional and thermal history of asteroids. Our group has conducted polarimetric research of asteroids (as well as Moon [1]) to determine the particle size and further investigate the evolutional histories of target asteroids [2],[3]. For example, the existence of regolith on an S-type asteroid, Toutatis, was suggested almost twenty years before space exploration [4]. Moreover, we reported that near-Sun asteroids indicate a signature of submillimeter grains, which could be created by a thermal sintering process by solar radiation [5]. However, it is important to note that in-situ polarimetry has not been reported on the asteroid surface, although the Korean Lunar Exploration Program aims to do polarimetry on the lunar surface [6]. Therefore, it is expected that the polarizer mounted on the Korean Apophis spacecraft can make the first estimate of the grain size and its regional variation over the Apophis surface. In this presentation, we outline research of S-type asteroid surfaces through remote-sensing observations and consider the role of polarimetry. Based on this review, we consider the purpose, potentiality, and strategy of the polarimetry using the onboard device for the Apophis spacecraft. We will report a possible polarization phase curve of Apophis estimated from ordinary chondrites and past observational data of S-type asteroids, taking account of the space weathering effect. Based on this estimation, we will consider the strategy of how to determine the particle size (and space weathering degree) of the Apophis surface. We will also mention the detectability of dust hovering on the surface.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.465-474
• /
• 2023

The effects of La³⁺ substitution for Sr²⁺-site on the crystal structure and the dielectric properties of (Ba_0.7Sr_0.3-3x/2La_x) (Ti_0.9Zr_0.1)O₃ (BSLTZ) (0.005 ≤ x ≤ 0.02) ceramics were investigated. The structural characteristics of the BSLTZ ceramics were quantitatively evaluated using the Rietveld refinement method from X-ray diffraction (XRD) data. For the specimens sintered at 1,550 ℃ for 6 h, a single phase with a perovskite structure and homogeneous microstructure were observed for the entire range of compositions. With increasing La³⁺ substitution (x), the unit cell volume decreased because the ionic size of La³⁺ (1.36 Å) ions is smaller than that of Sr²⁺ (1.44 Å) ions. With increasing La³⁺ substitution (x), the tetragonal phase fraction increased due to the A-site cation size mismatch effect. Dielectric constant (ε_r) increased with the La³⁺ substitution (x) due to the increase in tetragonality (c/a) and the average B-site bond valence of the ABO₃ perovskite. The BSLTZ ceramics showed a higher dielectric loss due to the smaller grain size than that of (Ba_0.7Sr_0.3)(Ti_0.9Zr_0.1)O₃ ceramics. BSLTZ (x = 0.02) ceramics met the X7R specification proposed by the Electronic Industries Association (EIA).

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.765-779
• /
• 2023

The Daum Vent Field (DVF) was newly discovered in the Central Indian Ridge during the hydrothermal expedition by the Korea Institute of Ocean Science & Technology (KIOST) in 2021. In this paper, we describe the detailed mineralogy and geochemistry of hydrothermal chimney and mound to understand the nature of hydrothermal mineralization in the DVF. The mineral assemblages (pyrite±sphalerite±chalcopyrite) of dominant sulfides, FeS contents (mostly <20 mole %) of sphalerite, and (Cu+Zn)/Fe values (0.001-0.22) of bulk compositions indicate that the DVF has an strong affinity with basaltic-hosted seafloor massive sulfide (SMS) deposit along the oceanic ridge. Combined with the predominance of colloform and/or dendritic-textured pyrite and relatively Fe-poor sphalerite in chimneys, the fluid-temperature dependency of trace element systematics (Co, Mn, and Tl) between chimney and mound indicates that the formation of mound was controlled by relatively reducing and high-temperature fluids compared to chimney. The δ³⁴S values (+8.31 to +10.52‰) of pyrite reflect that sulfur and metals were mainly leached from the associated basement rocks (50.6-61.3%) with a contribution from reduced seawater sulfur (38.7-49.4%). This suggests that the fluid-rock interaction, with little effect of magmatic volatile influx, is an important metal source for the sulfide mineralization in the DVF.