• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.997-1002
• /
• 1999

The aim of the present study was to investigate effects of food preservative addition and changes in composition of herb extract product on the growth of spoilage yeast, Zygosaccharomyces sp. Herbs such as Panax ginseng, Cinnamomum cassia, Lycium chinense, Zyzyphus juiuba and Jingiber officinale were altogether put into water and essence was extracted at 80oC, and then the extract was concentrated at 75oC. The herb extract product was made by adding vitamins, amino acids and honey to the concentrated herb extract. The amount of gas produced from the herb extract product was increased as inoculated cell number increased but decreased as Brix concentration increased. Gases were produced in small amount when incubation was made at 4oC but large amounts of gases were produced at 25 or 40oC of incubation. The gas production and growth of Zygosaccharomyces sp. were measured after browning reaction was induced by heating at 85oC for 12 hours. It appeared that heating treatment did not induce any significant change in the gas production and growth of the cell. The effects of addition of various sugar to the herb extract produce were also invesigated. Amounts of gas production were in the order of glucose>sucrose>oligosaccharide>stevioside. The viable cell count was measured as 6.0$\times$107 CFU/g when glucose was added to the herb extract product. The viable cell counts were 5.0$\times$106, 3.0$\times$103, and 3.0$\times$102 CFU/g in sucrose, oligosaccharide and stevioside added herb extract product, respectively. The amount of gas production from the herb extract product was remarkably reduced by addition of such food preservatives as sodium benzoate and DF 100. TLC(thin layer chromatography) chromatogram of the herb extract showed stability of the herb extract in the above treatments.

• Journal of the Korean Mathematical Society
• /
• v.54 no.4
• /
• pp.1231-1242
• /
• 2017

In this paper, we show that, under some conditions, self-maps of product spaces can be represented by the composition of two specific self-maps if their induced homomorphism on the i-th homotopy group is an automorphism for all i in some section of positive integers. As an application, we obtain closeness numbers of several product spaces.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1652-1655
• /
• 2008

A new high contrast LCD structure for TN mode TFT-LCD, of which the contrast ratio is 1.2 times hi gher than that of the conventional one, has been developed. The contrast ratio of TFT-LCD display can be improved by some modified materials, which like as polarizer, liquid crystal, color filter and light enhancement film. In order to know which condition can get the major contribution for the upgrade of the contrast ratio, we used Taguchi method and analyzed the contribution ratio for each composition and succeed to build up the formula of contrast ratio. From this study, we could achieve the highest CR value as 1200:1 of TN mod e TFT-LCD nowadays.

• The Journal of Information Technology and Database
• /
• v.3 no.1
• /
• pp.45-63
• /
• 1996

This paper presents an integrated object-oriented database approach for managing the evolution of products in agile manufacturing environments, Schema evolution modification facilities are provided to support full potential versioning of type definitions. All of the possible versions for a composite product are not explicitly represented to avoid version proliferation. However, valid configurations of any composite products can be provided to comply with customer demands, The attributes of composite products are classified in order to provide well-defined representation scheme for composite products and to be exploited in version control. The attributes are partitioned into composite-related and non composite-related categories. Composite-related attributes consist of subproducts and description ones. Subproducts attributes represent physical constituents of a composite product. Description attributes represent external features, assembling, and correspondence property. Interface attributes are introduced for managing configurability and version propagation. Version derivations due to the changes to the interface attributes are propagated toward the product composition hierarchy, The validity of configurations of composite products is checked by using configurability maps. Instance objects which represent the actual product instances are stored and manipulated in the database in order to support traceability during product life cycle.

• Journal of Applied Reliability
• /
• v.1 no.2
• /
• pp.109-120
• /
• 2001

This study reviewed the national standards for risk management to judge whether they are suitable for a product safety management program. Among the standards issued from Australia, New Zealand, Canada, Japan, and UK, the risk management guideline (AS/NZS 4360: 2000) issued jointly from both Australia and New Zealand have better features for product safety management program than any other risk management standards in view point of broad definition of risk concept including opportunities of loss and gain, stepwise composition of management processes applicable iteratively, and integrable form of structure addible to existing management practice. Comparing the three product safety management programs suggested by several authors yielded common features of product safety management program model: (1) organization for product safety, (2) risk identification, (3) risk evaluation, (4) risk treatment, (5) monitoring/communication, and (6) documentation. All of these activities can be performed within risk management framework proposed by AS/NZS 4360.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.865-875
• /
• 2018

Selection of optimum reaction conditions during deoxygenation process of palm oil is essential factor to obtain the maximum yield of bio-jet fuel. In this context, the deoxygenation of palm oil was carried out in a fixed bed reactor with an internal diameter of 1 inch loaded with a 1 wt.% $Pt/Al_2O_3$ catalyst. The composition of the organic liquid product(OLP), which can be utilized as a transportation fuel through the upgrading process, was analyzed by a gas chromatography method. The palm oil/hydrogen ratio and hydrogen pressure in the feed affected the decarboxylation(DCB) and hydrodeoxygenation(HDO) reactions, resulting in a change in the composition of the OLP. As the reaction temperature increased, the continuous cracking reaction of the deoxygenation product was promoted and the product composition in the $C_5{\sim}C_{14}$ region was increased. Thus, the results can help to understand the characteristics of deoxidation reaction of palm oil as well as the subsequent process, hydro-upgrading, to obtain the maximum yield of bio-jet fuel.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.2
• /
• pp.315-324
• /
• 2002

The purpose of this study was to fed out the effects of sensibility elements and screen composition elements on purchase intention on the internet fashion shopping mall. A total of 200 responses were collected from a Questionnaire survey. The sensibility words were used for sensibility elements analysis. Screen composition elements were divided into 5 factors by factor analysis; product property, convenience of shopping, service, design, and promotion. The study showed that the satisfaction of sensibility elements and screen composition elements led to a positive purchase intention.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.341-344
• /
• 1997

A vitrification process is under development in KEPRI for the treatment of low-and medium-level radioactive waste. Although the project is for developing and building Vitrification Pilot Plant in Korea, one of KEPRI's concerns is the quality control of the vitrified glass. This paper discusses a methodology for the estimation of glass composition by on-line measurement of molten glass properties, which could be applied to the plant for real-time quality control of the glass product. By remotely measuring viscosity and density of the molten glass, the glass characteristics such as composition can be estimated and eventually controlled. For this purpose, using the database of glass composition vs. physical properties in isothermal three-component system of SiO$_2$-Na$_2$O-B$_2$O$_3$, a software TERNARY has been developed which determines the glass composition by using two known physical properties(e.g. density and viscosity).

• Natural Product Sciences
• /
• v.25 no.2
• /
• pp.81-91
• /
• 2019

Marrubium vulgare, plant species belonging to Marrubium genus, is widespread in the Mediterranean areas, introduced elsewhere and also cultivated in many countries. Its oil is recognized to possess a considerable biological activities with varied chemical composition. This paper aims to overview the chemical composition and biological activities of M. vulgare essential oil's considered as a medicinal plant, widely used in folk medicine overall the world. In essential oils of M. vulgare, germacrene D, ${\beta}$-caryophyllene, ${\beta}$-bisabolene, bicyclogermacrene and carvacrol are generally considered as either mains or minor constituents and each species presents its own composition. Sesquiterpenoids were the dominant fraction while monoterpenoids were present in appreciable or in trace amount. Oxygenated fractions dominated in monoterpenes however, hydrocarbon fraction overpowered in sesquiterpenes. These oils are biologically active, they exhibit an antioxidant and antimicrobial activities and other activities. Due to the variability of composition of essential oil, further studies are necessary, particularly regarding their chemical's which may cause an important change in the biological activities of oils and probably defined different chemotype.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.956-956
• /
• 1990

A nitrogenation of coal ash in the presence of carbon was carried out to examine the effects of reaction temperature, reaction time and carbon composition on the formation of AlN, SiC and Si3N4. Decreasing the particle size increased the formation of AlN and its maximum composition in the product was obtaiend under 1450∼1500℃, 2 hours of reaction time and about 30% of carbon addition(on the basis of sample weight). Compositions of SiC and Si3N4 were distributed to the opposite so that SiC showed a higher composition compared with Si3N4 at a lower temperature, a shorter reaction time and a greater carbon addition.