• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.334-340
• /
• 2006

Copper is widely used in electric wire, cable, conductor in electric devices. As the demand for electric power is increasing rapidly, electric power devices are getting amazingly bigger and complicated. The using of light-weight conductor can reduce the size and making cost of the electric devices. In high-frequency application, Electric current in a conductor tends to shift to the surface of the conductor, resulting in an uneven current distribution in the inner conductor. In the extreme case the current may essentially concentrate in the 'skin' of the inner conductor as a surface current. In high frequency application, therefore, inner area of copper conductor may replace with aluminum conductor, which reduces the weight of conductor. This paper describes the manufacture and evaluation of composite conductors made of copper and aluminum. The optimum extruding ratio was 16 at $300^{\circ}C$. The electrical resistance of manufactured composite bus bar was $57{\mu}{\Omega}$ at DC and $49.5{\mu}\{Omega}$ at 300Hz.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.107-111
• /
• 2004

This work describes the effect of composite conductor on the characteristics of electric double layer capacitor. Test cell, which was fabricated with conducting composite consisted of 80％ of SPB and 20％ of VGCF, exhibits the better tate capability and the lower resistance than those of the cells fabricated with single electronic conductor. These enhanced properties could be related with the decrease of contact resistance between the activated carbon powders.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.621-622
• /
• 2005

Copper is widely used in electric wire, cable, conductor in electric devices. As the demand for electric power is increasing rapidly, electric power devices are getting amazingly bigger and complicated. The using of light-weight conductor can reduce the size and making cost of the electric devices. In high-frequency application, Electric current the current in a conductor tends to shift to the surface of the conductor, resulting in an uneven current distribution in the inner conductor. In the extreme case the current may essentially concentrate in the "skin" of the inner conductor as a surface current. In high frequency application, therefore, inner area of copper conductor may replace with aluminum conductor, which reduces the weight of conductor. This paper describes the manufacture and evaluation of composite conductors made of copper and aluminum.

• Composites Research
• /
• 제32권6호
• /
• pp.349-354
• /
• 2019

복합재료 중심인장선의 구성은 강화재로 사용되는 탄소섬유 및 유리섬유와 기지재로 사용되는 속경화 열경화성 에폭시로 되어있다. 본 연구에서는 가공송전선의 복합소재 중심인장선(ACCC)에 사용되는 에폭시 경화물에 대하여 분석하였다. 다관능성 에폭시 중 4관능성 에폭시(PA 806)을 사용하고 MNAn, HHPA 두가지 경화제 및 경화 촉진제를 사용하여 에폭시 경화물을 만들고 이를 분석하였다. 경화제의 종류 및 경화 촉진제의 함량에 따른 최적조건을 도출하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1076-1079
• /
• 2001

An anolmalous magnetoresistance effect has been theoretically studied at very low temperatures for composite normal metal conductors. This anomalous behavior is due to transverse Hall currents in the composite which would result in increased losses and higher effective resistance for the composite conductor. In this paper, transverse current flow and effective resistance with Cu-Al conductor configuration were analyzed using FEM(finite element method) for predicting the Hall losses to be resulted in anomalous magnetoresistance effect. And they are plotted three dimensionally to be visualized.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.14-18
• /
• 2014

The mechanical, electrical and thermal characteristics of insulating materials may significantly affect the performance and reliability of electrical devices using superconductors. General method to provide insulating layer between coated conductors is wrapping coated conductor with Kapton tape. But uniform and compact wrapping without failure or delamination in whole coverage for long length conductor is not a simple task and need careful control. Coating of insulating layer directly on coated conductor is desirable for providing compact insulating layer rather than wrapping insulating layers around conductor. Ceramic added polymer has been widely used as an insulating material for electric machine because of its good electrical insulating properties as well as excellent heat resistance and fairy good mechanical properties. The insulating layer of coated conductor should have high breakdown voltage and possesses suitable mechanical strength and maintain adhesiveness at the cryogenic temperature where it is used and withstand stress from thermal cycling. The insulating and mechanical properties of polymer can be improved by adding functional filler. In this study, insulating layer has been made by adding ceramic particles such as $SiO_2$ to a polymer resin. The size, amount and morphology of added ceramic powder was controlled and their effect on dielectric property of the final composite was measured and discussed for optimum composite fabrication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.408-410
• /
• 1997

An anomalous magnetoresistance effect has been observed at very low temperatures for composite normal metal conductors. This anomalous behavior is due to transverse Hall currents in the composite which would result in increased $I^2R$ losses and a higher effective resistance for the composite conductor. In this paper, transverse current flow and effective resistance of Cu-Al double-strip was analyzed using finite element method for predicting the Hall losses to be resulted in anomalous magnetoresistance effect, and then be able to visualized.

• 한국통신학회논문지
• /
• 제30권2C호
• /
• pp.10-15
• /
• 2005

본 논문에서는 전송방식과 유전알고리듬을 이용하여 간단하지만 빠르고 신뢰성 있는 복수유전율 측정 기법을 제안한다. 측정된 S-파라메터 중 전파계수만을 이용하여 복수 유전율을 얻었으며, 그 이유는 전파계수만을 이용한 복수유전율 측정기법이 반사 계수를 이용한 방법보다 측정오차에 대해 안정적인 결과 값을 제공하였기 때문이다. 또한 역추출 방식으로 유전알고리듬을 적용함으로써 매우 효율적이고 정확한 측정결과 값을 얻을 수 있었다. 제안된 방법을 이용하여 도체입자가 함유된 복합유전체 및 PCB 기판의 복소유전율을 측정하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권4호
• /
• pp.78-83
• /
• 2022

REBCO coated conductors are widely used for HTS power application, high magnetic field magnet application, and etc. A thermal stability of the REBCO conductor is essential for the operation of HTS-based device, and thermal conductivities of the conductor are relevant parameters for modeling cryogenic heat transfer. REBCO conductors consist of a REBCO layer, copper layers for electrical stabilization and a hastelloy substrate. At cryogenic temperature, thermal conductivity of copper and silver strongly depend on the purity of the material and the intensity of the magnetic field. In this study, thermal conductivities of the laminated composite structure of REBCO conductor are evaluated by using the thermal network model and the multidimensional heat conduction analysis. As a result, the thermal network model is applicable to REBCO conductors configured in series or parallel alone and multidimensional heat conduction analysis is necessary for complex cases of series and parallel configuration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1140-1143
• /
• 2002

This work describes the effect of conducting composite on the characteristics of electric double layer capacitor. The cell, which was fabricated with conducting composite consisted of 50 wt.% of SPB and 50 wt.% of VGCF, exhibits the higher specific capacitance, the lower resistance and the better rate capability than those of the cells fabricated with each single electronic conductor. These enhanced properties could be related with the dense structure of electrode.