• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.299-303
• /
• 2014

This study was to comparative analysis that different methods of extraction about total sugar content which the major functional components of edible and medicinal mushrooms. Through the phenol-sulfuric acid method was measured that Hot water extraction, acid extraction, and alkaline extraction. Drawing the standard curve to obtain the concentration of the glucose solution and the sample by applying the measured absorbance on the standard curve. Total sugar contents was measured after extraction with different solvents.(Hot water, 70% EtOH, 80% MeOH). The level of total sugar in Cordyceps militaris is highest in the hot water extraction with 658.4(${\mu}g/g$) and Coriolus versicolor in 649.7(${\mu}g/g$) and 679.0(${\mu}g/g$) was found as the highest in the acid extraction and the alkaline extraction. C. militaris and ASI 7025 showed the highest level in the hot water extraction. Finally, C. versicolor, Sparassis crispa showed that higher than the other mushrooms at the 1hr, 2hr microwave extraction. It was varied total sugar content according to the different extraction solvent and the extraction method.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.626-635
• /
• 2015

Along with the social interests and needs for health, the U-Healthcare Service as a new model to control individual dietary life and to prevent chronic diseases is now drawing the public attention. In this study, the characteristics of the requirement of U-Healthcare Service were investigated from subjects aged over 50 years old. As parts of the expectation to the U-Healthcare service, the customized clinical care & control (37.7%) and the systematic understanding of individual health state (21.4%) appeared significantly. And for the application of the U-Healthcare Service to the field of healthcare, the control of dietotherapy (43.9%) appeared higher than anything else and thus the customized service for individual dietotherapy seemed to be needed. Regarding the field of searching for health information, the disease control (35.6%), food materials (28.6%), and recipe for health foods (22.7%) appeared in sequence and revealed that the majority over 50% of subjects were interested in foods. The requirements for the information of dietary formula were also investigated through 5 points scaled questionnaires on respective topics of nutritive components, menus customized for corresponding health states (diseases), and the results obtained from surveys on respective topics all showed the needs for all information by representing each point value exceeded 3.9. Through the results obtained from this study, the provision of customized information enabling the nutritional control in accordance with individual states of health or disease was estimated to be needed for the popularization of U-Healthcare Service providing contents for dietary life of clients especially those of aged over 50 years.

• Journal of the Korean institute of surface engineering
• /
• v.12 no.3
• /
• pp.207-216
• /
• 1979

Environmental pollution or contaminations caused by various kinds of pollutants have become one of most serious problems of our time. Environ mental pollution is the unfavoralble alteration of our surroundings, through direct or indirect effects of changes in energy patterns, rediation levels, chemical and physical constitution and abundances of organisms. These changes may affect humans directly or through their supplies of water and of agicultural and other biological products, their physical objects or possessions, or their opportunities for recreation and appreciation of nature. Pollutants that meet the criteria of this definition of environmental pollution are numerous: gases (such as sulfur dioxide and nitrogen oxides) and paniculate matter (such as smoke particles, lead aerosols, and asbestos) in the atmosphere; pesticides and radioactive isotopes in the atmosphee and in waterways; sewage, organic. chemicals, and phosphates in water; solid wastes on land; excessive heating (thermal pollution) of rivers and lakes; and many others. Some of these pollutants are introduced into the environment naturally, others by human actions, and most in both ways. Our major concer is with environmental pollution resulting wholly or largely as a by-product of human activities, because these can be controlled most readily. Environmental pollution cannot be solved by science and technology alone. It should be handled by an interdisciplinary approach with combined methods of science and technology as wen as social science disciplines for the better solution of this critical problem. In this respect, introducing "Environmental Science," a new scientific approach for the solution of environmental problems, which is now widely accepted by most developed countries of the world will be very helpful for systematization of theoretical basis for a new scientific approach to environmental pollution. Environmental science is "the study of all systems of air, land, water, energy, and life that surround Man. It includes all sciences directed to the system-level of understanding of the environment, drawing especially upon such disciplines as meteorology, geophysics, oceanography, and ecology, and utilizing to the fullest knowledge and techniques developed in such fields as physics, chemistry, biology, mathematics and engineering as well as many social science disciplines, such as economics, such as economics, law, political science and public administration." The components of this discipline are not new, for they are drawn from existing areas of science within biology chemistry, physics, and geoscience. What is really new about environmental science, however, is it siewpoint - its orientation to global problems, its conception of the earth as a set of interlocking, interacting systems, and its interest in Man as a part of these systems.

• The Journal of Korean Society for Radiation Therapy
• /
• v.7 no.1
• /
• pp.156-166
• /
• 1995

Total body irradiation (TBI) requires large radiation field and extended source to axis distance (SAD), therefore in needs large size treatment room and it needs compensators which components. Appropriate thickness beam spoiler should be used to raise skin dose. Treatment machine, photon energy, total dose, dose rate, dose fractionation, patient position, shield of normal tissues and organs were known to important parameters for TBI. TBI disturbes regular daily treatment schedule and significantly overloads Radiation on oncology departments and during the treatment session it requires accurate reproduction of radiation field and patient position. We were enable to TBI in small size treatment room and short SAD with parallel opposing lateral fields technique and achieved homogenious whole body dose distribution using pb compensators and controled lung dose by lung shield blocks. Drawing a patient shadow on the wall, we could shortened set up time and possible to accurate reproduction of radiation field and patient position.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.1
• /
• pp.17-24
• /
• 2011

The characteristics of flow and strength of CLSM depend on the combination ratio including the fly ash, pond ash, cement, water quantity and etc. However, it is very difficult to draw the mechanism about the flow, strength and the mixing ratio of each components. Therefore, the method of calculation drawing the flow about the component ratio of CLSM and compression strength value is needed for the valid practical use of CLSM. To verify the efficiency of artificial neural network, new data which were not used for establishing the model were predicted and compared with the results of laboratory tests. In this research, it was used to evaluate the learning efficiency of the artificial neural network model and the prediction ability by changing the node number of hidden layer, learning rate, momentum, target system error and hidden layer. By using the results, the optimized artificial neural network model which is suitable for a flow and compressive strength estimate of CLSM was determined.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.273-279
• /
• 2003

Hypercube multicomputers have been drawing considerable attention from many researchers due to their regular structure and short diameter. One of keys to the performance of Hypercube is the efficiency of communication among processors. Among several communication patterns, multicast is important, which is found in a variety of applications as data replication and signal processing. As the number of processors increases, the probability of occurrences of fault components also increases. So it would be desirable to design an efficient scheme that multicasts messages in the presence of faulty component. In fault-tolerant routing and multicast, there are local information based scheme, global information based scheme and limited information based scheme in terms of information. In general, limited information is easy to obtain and maintain by compressing information in a concise format. In this paper, we propose a new routing scheme and a new multicast scheme using recently proposed fully reachability information scheme and new local information scheme. The proposed multicast scheme increases multicast success possibility and reduce deroute cases. Experiments show that multicast success possibility can increase at least 15% compared to previous method.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.744-752
• /
• 2013

The miscibility between poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was investigated using thermal analyses for the purpose of developing birefringence-free material at oriented state. The effect of methyl acrylate (MA) units as comonomer of PMMA on the miscibility was also studied. All the blends prepared in this study show composition-dependent single $T_g$'s between those of blend components and high transparency over the visible region, indicating the miscibility at molecular level and no discernible effect of MA units on it. No phase separation was observed at elevated temperature of $280^{\circ}C$, higher than the degradation of PLLA and PMMA. The interaction energy density in PLLA/PMMA blends with 17 mol% of MA was measured to be $-0.74J/cm^3$ from the equilibrium melting temperature depression based on the Hoffman-Weeks method. The blends show zero-${\Delta}$n behavior at a specific mixing ratio and the drawing ratio of 3 due to compensation of intrinsic orientation birefringence. Birefringence dispersion of PLLA/PMMA5 blends was also measured to examine the possibility for quarter-wave plates or polarizer protective films.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.189-206
• /
• 2016

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer's size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3068-3084
• /
• 2021

Investigations of large commercial aircraft impact effect on nuclear power plant (NPP) buildings have been drawing extensive attentions, particularly after the 9/11 event, and this paper aims to experimentally assess the damage and vibrations of NPP buildings subjected to aircraft crash. In present Part I, two shots of reduce-scaled model test of aircraft impacting on NPP building were carried out. Firstly, the 1:15 aircraft model (weighs 135 kg) and RC NPP model (weighs about 70 t) are designed and prepared. Then, based on the large rocket sled loading test platform, the aircraft models were accelerated to impact perpendicularly on the two sides of NPP model, i.e., containment and auxiliary buildings, with a velocity of about 170 m/s. The strain-time histories of rebars within the impact area and acceleration-time histories of each floor of NPP model are derived from the pre-arranged twenty-one strain gauges and twenty tri-axial accelerometers, and the whole impact processes were recorded by three high-speed cameras. The local penetration and perforation failure modes occurred respectively in the collision scenarios of containment and auxiliary buildings, and some suggestions for the NPP design are given. The maximum acceleration in the 1:15 scaled tests is 1785.73 g, and thus the corresponding maximum resultant acceleration in a prototype impact might be about 119 g, which poses a potential threat to the nuclear equipment. Furthermore, it was found that the nonlinear decrease of vibrations along the height was well reflected by the variations of both the maximum resultant vibrations and Cumulative Absolute Velocity (CAV). The present experimental work on the damage and dynamic responses of NPP structure under aircraft impact is firstly presented, which could provide a benchmark basis for further safety assessments of prototype NPP structure as well as inner systems and components against aircraft crash.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.24-47
• /
• 2013

This study focused on the constructional concepts, landscape design techniques and changes made of the Sandan(山壇) area in the rear garden of Changdeokgung Palace based on the spatial organization of the zone. The results of this study are as below. Constructional layers that have been maintained throughout the centuries from King Injo(仁祖), King Sukjong(肅宗), King Sunjo(純祖), the Japanese colonial period to the present, were found in the Sandan area. The Sandan area, which was developed with the establishment of Chuiseungjeong(取勝亭) during the ruling of King Injo(仁祖), was created as a resting place for the King, and its usage continued until King Sukjong(肅宗) built Nakminjeong(樂民亭). However, the whole area was reorganized to host ritual ceremonies, where ancestral rites were performed for the mountain gods, after Sandan and Baekunsa(白雲社) were built during King Gojong's reign, before the drawing of 'Painting of Eastern Palaces(東闕圖).' The architectural component used then appears to have been designed to serve ancestral ritual formalities for the god of land, or to satisfy the religious desires of the royal family not fulfilled by Confucian courtesy. These are characteristics that define the Sandan area. Meanwhile, the analysis of the ground plan of the Changdeokgung Palace revealed that the Sandan had been maintained until the Japanese colonial era, but was removed sometime after liberation. The area underwent extensive reform in the early 1970s, when the whole area was developed into a tourist destination called Bingcheon(氷泉). Then, a new road that runs through Bingcheon was laid, and the present condition reflects the construction result of the time. An interview with a person who had taken part in the repair work in the 1970s confirmed that the construction work at the time had the goal of establishing two drainage systems for drinking water and copied the Okryuchon(玉流川) well.