• Korean Journal of Culture and Social Issue
• /
• v.16 no.4
• /
• pp.447-468
• /
• 2010

The purpose of this study was to attain a clearer understanding of the reciprocal effects of deviant self-concept and delinquent behaviors by applying a latent state-trait autoregressive modeling approach. Although traditional autoregressive cross-lagged (ARCL) modeling has been widely applied to test the longitudinal reciprocal relationship between the two constructs, it could produce misspecified findings if there were trait-like processes involved in this relationship. The latent state-trait autoregressive(LST-AR) modeling was applied to control trait effects of deviant self-concept and to examine the reciprocal causal relations between the two constructs. Data were taken from a sample of 3,449 eighth graders who were followed annually for 5 years from the Korea Youth Panel Study. The combining LST-AR model with ARCL model substantiated the reciprocal effects of deviant self-concept and delinquent behaviors, even after the stable trait component of deviant self-concept was taken into account. The present findings shed lights on the reciprocal effects of behaviors (i.e., delinquency) and self concepts (i.e., deviant self-concept). Not only did behaviors change corresponding self-concept, but the ways adolescents perceived themselves influenced their behaviors.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.229-238
• /
• 2011

S-wave, which provides lithology and pore fluid information, plays a key role in estimating gas-hydrate saturation. In general, P- and S-wave velocities increase in the presence of gas-hydrate and the P-wave velocity decreases in the presence of free gas under the gas-hydrate layer. Whereas there are very small changes, even slightly increases, in the S-wave velocity in the free gas layer because S-wave is not affected by the pore fluid when propagating in the free gas layer. To verify those velocity properties of the BSR (bottom-simulating reflector) depth in the gas-hydrate prospect area in the Ulleung Basin, P- and S-wave velocity profiles were derived from multi-component ocean-bottom seismic data which were acquired by Korea Institute of Geoscience and Mineral Resources (KIGAM) in May 2009. OBS (ocean-bottom seismometer) hydrophone component data were modeled and inverted first through the traveltime inversion method to derive P-wave velocity and depth model of survey area. 2-D multichannel stacked data were incorporated as an initial model. Two horizontal geophone component data, then, were polarization filtered and rotated to make radial component section. Traveltimes of main S-wave events were picked and used for forward modeling incorporating Poisson's ratio. This modeling provides S-wave profiles and Poisson's ratio profiles at every OBS site. The results shows that P-wave velocities in most OBS sites decrease beneath the BSR, whereas S-wave velocities slightly increase. Consequently, Poisson's ratio decreased strongly beneath the BSR indicating the presence of a free gas layer under the BSR.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.55-62
• /
• 2005

In this paper, a CAB/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares, for a complicated model for which parametric modeling provided by CAD software is not possible. CAD modeling process is automated by using UG/OPEN API function and UG/Knowledge Fusion provided by Unigraphics. The generated model is transferred to the analysis code ANSYS in parasolid format. Visual DOC software is used for optimization. The system is developed for PLS(Plasma Lighting System), which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The PLS system consists of more then 20 components, which requires a lot of human efforts in modeling and analysis. The analysis for PLS includes static load, wind load and impact load analysis. As a result of analysis, it is found that the most critical component is a tilt assembly, which links lower & upper body assembly. For more reliable analysis, experiment is conducted using MTS and compared with the Finite element analysis result. The objective in the optimization is to minimize the material volume under allowable stresses. The design variables are three parameters in the tilt assembly that are chosen to be the most sensitive in stress values of twelve parameters. Gradient based method and RSM(Response Surface Method) are used for the algorithm and the results are compared. As a result of optimization, the maximum stress is reduced by 57%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.275-282
• /
• 2015

Recently, Vecna BEAR type robot to save injured individuals from inaccessible areas has been developed to minimize the loss of life. Because this robot is driven on rough terrain, there is a risk of rollover and vibration, which could impact the injured. In order to guarantee its stability, an algorithm is required that can estimate the speed limits for various environments in real time. Therefore, a dynamic model for real-time analysis is needed for this algorithm. Because the tracks used as the driving component of Vecna BEAR type robot consist of many parts, it is impossible to analyze the multibody tracks in real time. Thus, a lumped track model that satisfies the requirements of a short computation time and adequate accuracy is required. This study performed lumped track modeling, and the traction force was verified using RecurDyn, which is a dynamic commercial program.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.472-482
• /
• 2008

A modulation transfer function(MTF) tree is established to estimate the overall MTF of an observation satellite and to analyze the image performance. Basic MTF models relevant to each MTF tree component are represented as mathematical relationship between optics-structural dynamics, thermal deformation, attitude and dynamic characteristics of a satellite and the effects due to the space environment. The Basic MTF models consist of diffraction limited MTF with central obscuration, aberration, defocus, line-of-sight(LOS) jitter, linear motion, detector integration, and so forth. Performance estimation is demonstrated for a virtual earth-observation satellite in order to validate the constructed modeling method. The proposed models enable the system engineers to calculate the overall system MTF and to determine the crucial design parameters that affect the image performance in the conceptual design phase of an observation satellite.

• The KIPS Transactions:PartA
• /
• v.16A no.3
• /
• pp.199-208
• /
• 2009

Recently, there are many embedded system prototyping tools for helping embedded system designers to trial their product before it releases to the market. A prototype is very important for early embedded system design to grasp the desire functions, to get a good performance, to create delightful user interface, and to increase the valuable of the product. Prototyping tools can be classified by three categories: Physical, Virtual and Modeling prototyping. The integration of these prototyping tools becomes valuable for speed up time-to-market and for decrease design cost when design embedded system. The problem comes up because these tools sometime do not provide an instrument for communicating each other. In this paper, we propose a flexible and reusable mechanism for integrate these tools base on JavaBeans and ActiveX technology. We show how this mechanism can be employed in various prototyping tools.

• The Journal of Information Systems
• /
• v.13 no.1
• /
• pp.77-95
• /
• 2004

According to the increase of organizational complexity and the change of rapid information technology environment, many firms have shifted their information technology(IT) strategy from developing information systems in-house to purchasing application software such as Enterprise Resource Planning(ERP) Systems. Marketing and Sales functions within a Korean automotive part company include developing new assembly products, determining pricing, taking customer's orders, and shipping assembly products to customers. Marketing and Sales Information System(MSIS) in ERP system plays an important role in next Production Planning process. MSIS also makes management reporting and decision making faster and more uniform throughout an organization. MSIS promotes thinking about corporate goals, as opposed to thinking only about the goals of a single department or functional area. This paper intends to design and implement a MSIS in ERP systems for Korean automotive part company using object-oriented methodology In order to accomplish the implementation of MSIS in ERP system, we employed UML as its standard modeling language. In this study, four diagramming techniques such as use case diagram, sequence diagram, class diagram, component diagram among eight modeling techniques are used for analyzing hierarchical business process. In traditional marketing and sales function, a company with an unintegrated information system can have marketing and sales data that is data redundant or inaccurate. MSIS integrated in ERP system can solve the sales forecast problem, which minimizes the total costs of production, inventory, and transportation under constraints of production capacity. Also, the use of UML methodology makes S/W programmers shorten the phase of analysis and design in the implementation of MSIS system, and increase the reuse of software and the interoperability with corporate internal Information system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.602-612
• /
• 2010

In this paper, we propose an object-oriented modeling technique using UML(Unified Modeling Language) for accessibility of user and efficiency of facilities under Web-based integrated manufacturing management system application. For this, we first collect user requirements and related technology of integrated manufacturing system, and then design proposed system considering business flow and various essential design part(class, component, package, use case, and etc) to reduce system risk as well as communicate peacefully between developers in system redevelopments. Additionally, we develop database of manufacturing master code, check management, repair management and error management for proposed systems. Finally, we design and implement our three main modules; manufacturing check module, manufacturing repair module, manufacturing error module under Web-based environments with JSP language.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.62-72
• /
• 2015

Interest in three-dimensional (3D) printing processes has grown significantly, and several types have been developed. These 3D printing processes are classified as Selective Laser Sintering (SLS), Stereo-Lithography Apparatus (SLA), and Fused Deposition Modeling (FDM). SLS can be applied to many materials, but because it uses a laser-based material removal process, it is expensive. SLA enables fast and precise manufacturing, but available materials are limited. FDM printing's benefits are its reasonable price and easy accessibility. However, metal printing using FDM can involve technical problems, such as suitable component supply or the thermal expansion of the heating part. Thus, FDM printing primarily uses materials with low melting points, such as acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) resin. In this study, an FDM process for enabling metal printing is suggested. Particularly, the nozzle and heatsink for this process are focused for stable printing. To design the nozzle and heatsink, multi-physical phenomena, including thermal expansion and heat transfer, had to be considered. Therefore, COMSOL Multiphysics, an FEM analysis program, was used to analyze the maximum temperature, thermal expansion, and principal stress. Finally, its performance was confirmed through an experiment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.684-691
• /
• 2001

In this paper, we design and implement a system which recognizes and tracks a human head on a sequence of images. In this paper, the color of the skin and ellipse modeling is used as feature vectors to recognize the human head. And the modified time-varying edge detection method and the vertical projection method is used to acquire regions of the motion from images with very complex backgrounds. To select the head from the acquired candidate regions, the process for thresholding on the basis of the I-component of YIQ color information and mapping with ellipse modeling is used. The designed system shows an excellent performance in the cases of the rotated heads, occluded heads, and tilted heads as well as in the case of the normal up-right heads. And in this paper, the combinational technique of motion-based tracking and recognition-based tracking is used to track the human head exactly even though the human head moves fast.