• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.171-177
• /
• 2008

CBD(Component-based Development), which refers to the method of treating software as parts of a larger whole and developing new information systems through the assembly and synthesis of existing software, has been popular among many methods for developing software. However, CBD has limitations in the mobile environment which requires frequent requirements change and flexible process. To overcome those limitations, we propose an improved mobile development process based on the UML(Unified Modeling Language) components. Our Proposal is the simple development process implemented as three phase of component diagrams for the mobile system having quickly evolving technology and small-size project. Through the implementation of a mobile banking service with the proposed development process, we show that our proposal works efficiently for the requirements change and flexible development.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.75-84
• /
• 2000

GIS has been building for various application fields with the aids of NGIS project, especially numerous municipal governments are building a UIS in the level of local governments' informatization. Although there are some difference between municipal governments' business, still many things are in common. So far, individual municipal governments have developed a UIS for their own use, which lead to duplicated development of the UIS. The component technology has been introduced to remove such duplicated efforts and it enabled maximizing the reusablilty of the UIS already developed. This paper proposes a component design for network analysis of the drinking water to calculate the amount of flow and the head loss. This component design provides the initial water amount to estimate the amount of the network flow and the head loss, thereby supports the decision making such as installation or extension of the pipe network. The process of the component design accompanies the business reengineering to support the standardized business work flow. Also, the design of the network analysis component uses the algorithms induced with UML specification. Based on the component design, the component development has been progressing and the network analysis system would be followed. In the near future, another component to integrate the network analysis and the business related to the drinking water needs to be developed.

• Proceedings of the CALSEC Conference
• /
• 1997.11a
• /
• pp.127-132
• /
• 1997

본 논문의 연구방향은 객체지향방법론을 이용하여 PDM에서의 워크플로우를 재설계하는 것이다. 기존의 방법론들은 워크플로우 엔진과 작업자 사이의 흐름에 중점을 두었으나 본 논문에서는 프로세스와 작업에 중점을 두고 이를 각각의 객체로 설계하는 방안을 연구하고자 한다. 시스템의 설계를 위하여 Rumbaugh의 OMT(Object Modeling Technique) 방법론을 기본모델링 방법론으로 사용한다. 연구내용은 object model을 통한 정적 구조 설계, dynamic model을 이용한 시간에 따른 동적 구조 설계, 그리고 functional model에서의 데이터의 전이 및 시스템간의 연계의 설계이다. 특히 object model에서의 작업설계 및 dynamic model에서의 상태변화에 중점을 두고 DCOM(Distributed Component Object Model)을 사용하여 작업(task)을 중심으로 한 분산환경을 구현한다.

• Journal of Korea Port Economic Association
• /
• v.20 no.1
• /
• pp.141-151
• /
• 2004

Although the small and medium ports are actually competing with various strategies, the definition and structural understanding of small and medium ports are not known very much. Therefore this study has launched from this fact, and has the objective of obtaining the structural model for increasing shippers' attraction of small and medium ports. The process began by abstracting the components that composed the success factors through recent research, and grouping it by FA(Factor Analysis) method. Also, by using the FSM(Fuzzy Structural Modeling) method to understand the structure of the grouped components, and the structural model for increasing shippers' attraction of small and medium ports was able to obtain as the result. When analyzing the obtained structural model, easiness of shipment, connection to hubport and efficiency of hinterland network came out to be the most important component groups.

• Speech Sciences
• /
• v.9 no.1
• /
• pp.39-47
• /
• 2002

This paper proposes an effective method to remedy the acoustic modeling problem inherent in the usual log-normal Parallel Model Composition intended for achieving robust speech recognition. In particular, the Gaussian kernels under the prescribed log-normal PMC cannot sufficiently express the corrupted speech distributions. The proposed scheme corrects this deficiency by judiciously selecting the 'fairly' corrupted component and by re-estimating it as a mixture of two distributions using data-driven PMC. As a result, some components become merged while equal number of components split. The determination for splitting or merging is achieved by means of measuring the similarity of the corrupted speech model to those of the clean model and the noise model. The experimental results indicate that the suggested algorithm is effective in representing the corrupted speech distributions and attains consistent improvement over various SNR and noise cases.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.11 s.116
• /
• pp.1165-1171
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit (IC) fabrication and surface mount technology The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.428-433
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit(IC) fabrication and surface mount technology. The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.175-180
• /
• 2011

A large AC generator is an important component of the power system. It is a need for research of AC generator protection relay for the next-generation ECMS and an efficient operation of protection control system. However, most of protection and control systems used in power plants have been still imported as turn-key and operated in domestic. This may cause the lack of the correct understanding on the protection systems and methods, and thus have difficulties in optimal operation. In this paper, over-excitation protection relaying is one of the protective factors in generator protection IED was presented. The cause and protection principles were dealt and, DFT-based gain compensation algorithm was adopted for the frequency measurement. The Republic of Korea 345kV modeling data by EMTP-RV was used for performance evaluation.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.327-330
• /
• 2007

This article discusses a capacity planning method in QoS-guaranteed IP networks such as BcN (Broadband convergence Network). Since IP based networks have been developed to transport best-effort data traffic, the introduction of multi-service component in BcN requires fundamental modifications in capacity planning and network dimensioning. In this article, we present the key issues of the capacity planning in multi-service IP networks. To provide a foundation for network dimensioning procedure, we describe a systematic approach for classification and modeling of BcN traffic based on the QoS requirements of BcN services. We propose a capacity planning framework considering data traffic and real-time streaming traffic separately. The multi-service Erlang model, an extension of the conventional Erlang B loss model, is introduced to determine required link capacity for the call based real-time streaming traffic. The application of multi-service Erlang model can provide significant improvement in network planning due to sharing of network bandwidth among the different services.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.44-53
• /
• 1992

Automotive transmission is the principle component of vehicle driving system, which transmits the adjusted engine power. The automation of transmission arises from the annoyance of transmission operation such as the frequent stop/start of vehicle and the shifting transients. The study on the optimal shifting condition for the automation of transmission needs the investigation of shifting transients. However, the dynamic modeling theory during transient period is not well-established. In this study, the techniques of dynamic modeling for the power transmission system with Merrite-Wilson gear train are presented. To predict the shifting transients, a driving simulation program is developed, and the results of the analysis are cross-checked in the field test.