• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.163-167
• /
• 2013

A modified two-point impedance spectroscopy technique exploits the geometric constriction between an electrolyte and a cathode with an emphasis on semispherical-shaped electrolytes. The spatial limitation in the electrolyte/electrode interface leads to local amplification of the electrochemical reaction occurring in the corresponding electrolyte/electrode region. The modified impedance spectroscopy was applied to electrical monitoring of a YSZ ($Y_2O_3$-stabilized $ZrO_2$)/SSC ($Sm_{0.5}Sr_{0.5}CoO_3$) system. The resolved bulk and interfacial component was numerically analyzed in combination with an equivalent circuit model. The effectiveness of the "spreading resistance" concept is validated by analysis of the electrode polarization in the cathode materials of solid oxide fuel cells.

• 전자공학회지
• /
• 제30권3호
• /
• pp.295-295
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• 전자공학회지
• /
• 제30권3호
• /
• pp.81-85
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.91-99
• /
• 1998

This paper presents a methodology for identifying the cutter runout geometry in end milling process. Cutter runout is common but undesirable phenomenon in multi-tooth machining because it introduces variable chip loading to insert which results in a accelerated tool wear. amplification of force variation and hence enlargement vibration amplitude From understanding of chip load change kinematics, the analytical cutting force convolution model was formulated as the angular domain convolution model was formulated as the angular domain convolution of three dynamic cutting force component functions. By virtue of the convolution integration property, the frequency domain expression of the local cutting forces and the chip width density of the cutter. Experimental study is presented to validate the analytical model. This study provides the in-process monitoring and compensation of dynamic cutter runout to improve machining tolerance and surface quality for industrial application.

• Journal of Information Processing Systems
• /
• 제10권3호
• /
• pp.459-470
• /
• 2014

In this paper, the average probability of the symbol error rate (SER) and throughput are studied in the presence of joint spectrum sensing and data transmission in a cognitive relay network, which is in the environment of an optimal power allocation strategy. In this investigation, the main component in calculating the secondary throughput is the inclusion of the spatial false alarms, in addition to the conventional false alarms. It has been shown that there exists an optimal secondary power amplification factor at which the probability of SER has a minimum value, whereas the throughput has a maximum value. We performed a Monte-Carlo simulation to validate the analytical results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권3호
• /
• pp.99-106
• /
• 2002

This study presents an approach to model the Electric Railway System with the common grounding based on the 8-port network model and to analyse traction power feeding system focused on the amplification of harmonic current. The entire system can be easily modeled by the combination of 8-port representation of each component in parallel and/or series. Through the research, 8-port network model which can be effectively applied to harmonic analysis is derived.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.493-500
• /
• 2004

We have developed a novel method for patterning functional images in thin polymer films. The key materials we utilized for the imaging were dihydroxyanthraquinones protected with acid-labile tert-butoxycarbonyl (t-Boc) blocking groups. Among the tested compounds, 1,4-dihydroxyanthraquinone (quinizarin; 1) underwent the most drastic change in terms of its color and fluorescence upon protection. We prepared the t-Boc-protected quinizarin and polymers bearing the protected quinizarins as pendent groups. To investigate the possibility of a single-component imaging system, we synthesized a styrenic monomer 14 incorporating protected quinizarin and a maleimide derivative 15 bearing a photoacid generating group and subjected them to polymerization. Selective removal of the protecting groups of the quinizarin moieties in the exposed area using photolithographic techniques allowed regeneration of quinizarin and patterned fluorescence images in the polymer films.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1513-1525
• /
• 2016

Rapid and accurate phase synchronization is critical for the reliable control of grid-tied inverters. However, the commonly used software phase-locked loop methods do not always satisfy the need for high-speed and accurate phase synchronization under severe grid imbalance conditions. To address this problem, this study develops a novel open-loop phase locking scheme based on a synchronous reference frame. The proposed scheme is characterized by remarkable response speed, high accuracy, and easy implementation. It comprises three functional cascaded blocks: fast orthogonal signal generation block, fast fundamental-frequency positive sequence component construction block, and fast phase calculation block. The developed virtual orthogonal signal generation method in the first block, which is characterized by noise immunity and high accuracy, can effectively avoid approximation errors and noise amplification in a wide range of sampling frequencies. In the second block, which is the foundation for achieving fast phase synchronization within 3 ms, the fundamental-frequency positive sequence components of unsymmetrical grid voltages can be achieved with the developed orthogonal signal construction strategy and the symmetrical component method. The real-time grid phase can be consequently obtained in the third block, which is free from self-tuning closed-loop control and thus improves the dynamic performance of the proposed scheme. The proposed scheme is adaptive to severe unsymmetrical grid voltages with sudden changes in magnitude, phase, and/or frequency. Moreover, this scheme is able to eliminate phase errors induced by harmonics and random noise. The validity and utility of the proposed scheme are verified by the experimental results.

• 한국균학회지
• /
• 제20권4호
• /
• pp.315-323
• /
• 1992

재현성 있는 RAED marker들의 증폭을 위해서 PCR에 영향을 주는 조건들에 대해 조사를 하였다. 그 결과 약 15 ng의 DNA가 효과적인 PCR에 적합한 양이었으며 PCR에 사용되는 성분(reaction component)들의 농도가 PCR 결과에 있어서 상호의존관계에 있었고 DNA 용액에 포함되어 있는 RNA가 DNA 증폭을 방해하는 작용을 하였다. $25\;{\mu}l$의 PCR 반응용액에 30ng의 10-mer primer, $200\;{\mu}M$ dNTP, 0.001% gelatin, 1.5 mM $MgCl_2$, 10 mM Tris-Cl(pH 8.8), 50 mM KCl, 0.1%, Triton X-100, 2units의 Taq DNA polymerase, 그리고 RNA를 제거한 15 ng의 DNA를 사용한 결과 가장 재현성있는 RAPD marker들이 증폭되었다.

• 한국해안해양공학회지
• /
• 제8권2호
• /
• pp.193-203
• /
• 1996

죽변항 내외의 2개 정점에 수압식 파고계를 설치하여 동계의 악천후시 현장관측을 실시하고 장주기 부진동 특성을 파악하였다. 관측자료 분석에 의한 공진주기 해석시 기존의 항내 정점에서 스펙트럼 에너지가 최대인 주기 및 그 분포 형태를 기준한 방법외에 항외에 대한 항내 정점에서의 상대 증폭비를 기준한 방법을 도입하였다. 자료 분석과 수치실험 결과 죽변항 수역의 제1 공진 모드는 약 12분에서 약 7배의 증폭비를 가지며 제2 공진 모드는 약 6분인 것으로 나타났다. 관측기간중 항내에서의 수면진동폭은 약 10-20 cm로 나타났으며 황천시 항내 정점에서 단주기파의 군파 효과 또는 이 성분이 장주기파에 중첩된 영향에 의한 것으로 생각되는 2-3분 부근의 부진동이 출현하였다. 단주기파와 장주기파에서 통상적으로 사용되는 반사율을 선형적으로 연결시킨 수치실험을 통하여 3분 이하 부진동에서의 증폭비를 비교적 잘 재현하였다.