• Toxicological Research
• /
• v.12 no.1
• /
• pp.21-27
• /
• 1996

Vitamin C has been well known to be a potential chemopreventive agent for several toxic compounds. It reduced the mutation frequencies of 6-sulfooxymethylbenzo[a]pyrene (SMBP) and 6hydroxymethylbenzo[a]pyrene (HMBP) in Salmonella typhimurium TA98 and TA100, indicating that corbic acid affects both frameshift and base-pair substitution mtltations. A similar type of dose-response relationship was shown in the V79 cells, although the inhibitory effect was less dramatic compared with that in S. typhimurium. However, SMBP or HMBP binding to calf thymus DNA was not affected by the presence of vitamin C, suggesting that SMBP seems to be much more reactive to calf thymus DNA than vitamin C. This was supported by migration pattern and fluorescence intensity of SMBP-modified plasmid on the gel. These restilts were not correlated with mutation tests in bacterial and mammalian cell systems. It has been already reported that vitamin C inactivates SMBP through the formation of covalently bound addact. It was found from HPLC analysis that the reaction between vitamin C and SMBP was accomplished within just 5 min and then produced the several products. These findings indicate that the beneficiary of vitamin C is not merely derived from the covalent adducts. On the other hand, the addition of DNA to incubation mixture reduced the amounts of vitamin C adducts while the magnitude of HMBP peak increased, suggesting that DNA accelerates the SMBP hydrolysis to intercept the interaction between SMBP and vitamin C or forms rapidly complex with SMBP.

• Journal of Pharmacopuncture
• /
• v.25 no.1
• /
• pp.52-62
• /
• 2022

Objectives: Snake venom is a complex mixture of various pharmacologically active substances, such as small proteins, peptides, and organic and mineral components. This paper aims to identify and analyse the proteins in common venomous snakes, such as Gloydius blomhoffii (G. blomhoffii) and Agkistrodon acutus (A. acutus), in Korea. Methods: We used mass spectrometry, electrophoresis, N-terminal sequencing and in-gel digestion to analyse the proteins in these two snake venoms. Results: We identified eight proteins in G. blomhoffii venom and four proteins in A. acutus venom. The proteins detected in G. blomhoffii and A. acutus venoms were phospholipase A₂, snake venom metalloproteinase and cysteine-rich secretory protein. Snake C-type lectin (snaclec) was unique to A. acutus venom. Conclusion: These data will contribute to the current knowledge of proteins present in the venoms of viper snakes and provide useful information for investigating their therapeutic potential.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.310-317
• /
• 2022

The mass attenuation coefficient is the primary physical parameter to model narrow beam gamma-ray attenuation. A new machine learning based approach is proposed to model gamma-ray shielding behavior of composites alternative to theoretical calculations. Two fuzzy logic algorithms and a neural network algorithm were trained and tested with different mixture ratios of vanadium slag/epoxy resin/antimony in the 0.05 MeV-2 MeV energy range. Two of the algorithms showed excellent agreement with testing data after optimizing adjustable parameters, with root mean squared error (RMSE) values down to 0.0001. Those results are remarkable because mass attenuation coefficients are often presented with four significant figures. Different training data sizes were tried to determine the least number of data points required to train sufficient models. Data set size more than 1000 is seen to be required to model in above 0.05 MeV energy. Below this energy, more data points with finer energy resolution might be required. Neuro-fuzzy models were three times faster to train than neural network models, while neural network models depicted low RMSE. Fuzzy logic algorithms are overlooked in complex function approximation, yet grid partitioned fuzzy algorithms showed excellent calculation efficiency and good convergence in predicting mass attenuation coefficient.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.803-810
• /
• 2011

The public interest of global warming and energy shortage is gradually increased, and the related industries also have become interested in developing eco-friendly material and technology. Warm-mix asphalt (WMA) is a result of the developments to alleviate global warming and energy problems. This WMA is produced at lower temperatures than the temperature at which hot mix asphalt (HMA) is produced. Because most tests in Superpave are developed only for the performance and maintenance of HMA produced by hot temperatures, it is difficult for the tests to identify properly the material properties and then evaluate the performances between HMA and WMA. This study deals with the development of a new protocol to differentiate HMA and WMA performance, and especially the interfacial properties between asphalt and aggregate are targeted as the performance indicator; thus, an evaluation method and guideline are suggested. The concept and idea of the test method applied in this study were modified from the DSR moisture damage test protocol. In addition, TSR test was performed to affirm the relation between the asphalt-aggregate interface and the asphalt-aggregate mixture performances. The followings are the results of this study. Shear stress at 85% linear visco-elastic complex modulus (LVE $G^*$) can be a better parameter than LVE $G^*$, which can assess the interfacial or bonding performance between asphalt and aggregate. Moreover, measuring the bonding performance in thinner film thicknesses will be a better way to evaluate the real and field situation between asphalt and aggregate. The interfacial properties' criteria to apply the newly developed test and parameter should be developed, after the asphalt mixture criteria relating to the interfacial properties are completed.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.36-43
• /
• 2011

Plant biomass has been proposed as an alternative source of petroleum-based chemical compounds. Especially, aromatic chemical compounds can be obtained from lignin by depolymerization processes because the lignin consist of complex aromatic materials. In this study, kraft lignin, the largest emitted substance among several kinds of lignin in Korea, was used as a starting material and was characterized by solid-state $^{13}C$-Muclear Magnetic Resonance($^{13}C$-NMR), Fourier Transform Infrared Spectroscopy(FT-IR), Elemental Analysis(EA). The depolymerization of kraft lignin was studied at water-phenol mixture solvent in near critical region and the experiments were conducted using a batch type reactor. The effects of water-to-phenol ratio and reaction temperature($300-400^{\circ}C$) were investigated to determine the optimum operating conditions. Additionally, the effects of formic acid as a hydrogen-donor solvent instead of $H_2$ gas were examined. The chemical species and quantities in the liquid products were analyzed using gas chromatography-mass spectroscopy(GC-MS), and solid residues(char) were analyzed using FT-IR. GC-MS analysis confirmed that the aromatic chemicals such as anisole, o-cresol(2-methylphenol), p-cresol(4-methylphenol), 2-ethylphenol, 4-ethylphenol, dibenzofuran, 3-methyl cabazole and xanthene were produced when phenol was added in the water as a co-solvent.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.85-93
• /
• 2011

The structural components of microorganism are quite related to the toxin and environmental conditions. The vegetative and dormant cells are quite affected by the physical and chemical environments to survive and they will be dormant when they are in the extreme environment. The mechanism to activate the microorganisms however, is not well defined yet in the area of activation state and sporulation state through the analysis of EPS. Other than that even the main mechanism of prior to acquisition of analysis values is not well understood. Therefore, what kind of specific environment to affect the activation and sporulation will be discussed through the analysis of the extracellular polymeric substances(EPS). EPS are a high molecular weight mixture of polymers presenting both outside of cells and interior of microbial aggregates. They are a major complex materials in microbial aggregation for sustaining them together in a three dimensional matrix. Three commonly used extraction methods were applied to this study their effectiveness and quantification in extracting EPS from several Bacillus microorganisms and activated sludge. Three extraction methods used for this study are regular centrifugation with formaldehyde (RCF), Steaming, and EDTA extraction. The results of EPS contents such as the quantitative proteins, carbohydrates and the ratio of protein versus carbohydrate from the several species with the several specific methods showed in this research. This study aims to get comparable results of the quantitative production of EPS and the effectiveness of sedimentation for Bacillus microorganisms and activated sludge from several wastewater treatment plans. The results revealed that the protein amount extracted was the highest by the Steaming method of three extraction methods before sporulation and the carbohydrate amount extracted was the highest by the RCA method of three extraction methods after sporulation. The higher amount of protein compared with carbohydrate from Bacillus microorganisms affected higher sedimentation efficiency, however it could not be found the relation between the EPS production and sedimentation efficiency for the activated sludge.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.145-156
• /
• 2018

Urban campus, one of the main urban facilities, is the representative place that is struggling with 'gridlock'. Due to privatization of space among different departments and space shortages, gridlock has been occurring as a result. The urban campus trying to solve this problem by changing the quality of space, especially the structure of the shared space, which is expected to be the solution to the grid lock problem. The main purpose of this study is to investigate the structural change in the university's shared space based on paradigm transition. The theoretical consideration is to analyze the spatial characteristics of university shared space that appear at different stages through a new perspective that compares the gridlock phenomenon and the shared paradigm. The framework of the analysis of the shared space, which has recently been restructured, is classified into the spatial characteristics of collaborative space, the creative space, and the common/complex space. In addition, these spatial characteristics are again analyzed through the division of legislative facility classification, management governance subject, area, building location and layout, exposure to the outside as well as the analysis of student and staff entry and exit, sharing structure of site and space, and the classification of program characteristics. The results are as follows: The restructured space is systemized so that the management governance of each space would be connected to each other to share information and space. Furthermore, the spatial boundary between colleges or between campus spaces are not only physically, but categorically clear. The restructured space has semi (or in-between)-spatial characteristics such as the intersection in inside and outside of the pedestrian's circulation and the mixture of programs. This study could serve as principal references in presenting the systematic analysis of directions of the shared spatial structure for the urban campus where new educational space is required due to the changes in the university system.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.39-51
• /
• 1976

As an accempt to increase thc efficiency of land use and the food production to achieve the national goal in the food self-sufficiency, nine cropping systems on the upper-land were examined in pure-stand and in mixtures of soybean, corn, potato and radish. The important conclusions of this study were summarized as follows; 1. The flowering date of soybean was two or three days earlier in pure-stand than in the mixture with corn. The maturing date two days earlier in the pure-stand than in the mixture with corn. The flowering and maturing dates were not different among various cropping systems in corn. 2. The stem length of soybean was significantly different among various cropping systems. Soybean in pure-stand was shorter in stem length than with corn. 3. The number of pods per soybean plant did not give any significant differences among various cultivation methods. 4. The length of internode and the number of nodes per soybean plant in the mixture with corn were greater than in the pure-stand. In the number of branches per plant this was reversed. 5. The average stem dry weight of soybean per 10a was not significantly different among various cultivation methods. 6. The soybean yield per 10a in the pure-stand was obviously greater than the mixture and there were significant differences among cultivation method within the mixture with corn in soybean yield. 7. The 1,000-grain weight of soybean was significantly different and those in the pure-stand was heavier than those in the mixture with corn. 8. Grain weight per soybean plant and the stem diameter in the pure-stand were significantly lesser than those in the mixture with corn. 9. In the comparisons of corn in the pure-stand and in the mixture with soybean, plant height, number of ear per 10a, mean ear weight and remember of grain per plant, 100-grain weight, ear length, ear girth and number of ear pel plant were not significantly different among various cultivation methods except for the grain yield per 10a. 10. In the economic analysis, the mixture with soybean and corn gave the greatest gross income. The combination 7 was the best which was 47.6% increase income comparing with the soybean pure-stand. 11. As it can be assumed, soybean plant was influenced greatly than corn by various cropping system. It is necessary to study more complex cropping system finding and giving more desirable multiple cropping system for the farmer.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.333-340
• /
• 2021

In this study, Rosa multiflora was sampled through extraction, concentration, and freezing. The antioxidant efficacy of a mixture of R. multiflora extract and ascorbic acid was compared with a single ascorbic acid. The purpose of this study was to analyze the antioxidant efficacy through the synergistic effect of R. multiflora extract and ascorbic acid. The experiment measured electron donating ability, ABTS+ radical scavenging, SOD-like activity, xanthine oxidase inhibition activity, reducing power, FRAP, polyphenolic content measurement, and flavnoid content measurement. As a result, the complex showed higher antioxidant activity than the control group (ascorbic acid) in the electron donating ability test and the xanthine oxidase inhibitory activity test. In the case of the flavonoid content experiment, it was confirmed that RMW+A (272.1 mg QE/g), RME+A (90.6 mg QE/g), and RMW+A (79.4 mg QE/g) at a concentration of 100 ㎍/mL had a higher flavonoid content than the control group (19.0 mg QE/g). Therefore, the extract and ascorbic acid complex exhibited a synergistic effect compared to the single use. Therefore, it is thought that this complex will contribute to product stabilization and skin aging inhibition when used in antioxidant cosmetics.

• Journal of Photoscience
• /
• v.12 no.2
• /
• pp.101-107
• /
• 2005

Infrared multiphoton dissociation of $CHCl_2F$ was studied using $CO_2$ laser excitation. Three products, $C_2Cl_2F_2$, $C_2ClF_3$, and $C_2HClF_2$, were identified by the analysis of the gas mixture from the photoreaction of $CHCl_2F$. The dependence of the reaction probability on added Ar gas pressure and excitation laser pulse energy was investigated. At low pressure (< 10 torr), the reaction probability increased as Ar pressure increased due to the rotational hole-filling effect, while it diminished with the increase of Ar pressure at high pressure (> > 20 torr) due to the collisional deactivation. The ratio of two products $(C_2ClF_3/C_2Cl_2F_2)$ decreased at low pressure (< 10 torr) and increased at high pressure (> 20 torr) with the increase of Ar pressure. The log-log plot of the reaction probability vs. laser pulse energy (${\\phi}$) was found to have a linear relationship, and its slope decreased as the added Ar pressure was increased. The reaction mechanisms for product formation have been suggested and validated by experimental evidences and considering the energetics. Fluorine-chlorine exchange reaction in the intermediate complex has been suggested to explain the formation of $C_2ClF_3$.