• Journal of Chest Surgery
• /
• v.57 no.2
• /
• pp.120-125
• /
• 2024

Background: This study aimed to assess the outcomes of patients with complex rib fractures undergoing operative or nonoperative management at our major trauma center. Methods: A retrospective review of all patients who were considered for surgical stabilization of rib fractures (SSRF) at a single major trauma center from May 2016 to September 2022 was performed. Results: In total, 352 patients with complex rib fractures were identified. Thirty-seven patients (11%) fulfilled the criteria for surgical management and underwent SSRF. The SSRF group had a significantly higher proportion of patients with flail chest (32 [86%] vs. 94 [27%], p<0.001) or Injury Severity Score (ISS) >15 (37 [100%] vs. 129 [41%], p<0.001). No significant differences were seen between groups for 1-year mortality. Patients who underwent SSRF within 72 hours were 6 times less likely to develop pneumonia than those in whom SSRF was delayed for over 72 hours (2 [18%] vs. 15 [58%]; odds ratio, 0.163; 95% confidence interval, 0.029-0.909; p=0.036). Prompt SSRF showed non-significant associations with shorter intensive care unit length of stay (6 days vs. 10 days, p=0.140) and duration of mechanical ventilation (5 days vs. 8 days, p=0.177). SSRF was associated with a longer hospital length of stay compared to nonoperative patients with flail chest and/or ISS >15 (19 days vs. 13 days, p=0.012), whilst SSRF within 72 hours was not. Conclusion: Surgical fixation of complex rib fractures improves outcomes in selected patient groups. Delayed surgical fixation was associated with increased rates of pneumonia and a longer hospital length of stay.

• Tunnel and Underground Space
• /
• v.25 no.4
• /
• pp.359-372
• /
• 2015

Rock masses include various rock discontinuities such as faults, joints, and bedding planes. These discontinuities appear as complex structures in geometry. In this study, growth patterns of fractures between two stepping shear fracture tips are numerically modeled using PFC2D (Particle Flow Code). The numerical model showed not only incipient growth of fractures at the tips of preexisting fractures but also subsequent growth of the new fractures. It is observed from all of the experiments that the incipient fractures are tensile cracks developed at $30{\sim}57^{\circ}$ to the preexisting fractures and the subsequent growth of these fractures were at low angles to the preexisting fractures this study.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.5
• /
• pp.388-395
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the resistance to deformation under static overloading by measuring yield and fracture strength, and to analyze the failure characteristics of implant assemblies made of different titanium grades and connections. MATERIALS AND METHODS. Six groups of implant assemblies were fabricated according to ISO 14801 (n=10). These consisted of the combinations of 3 platform connections (external, internal, and morse tapered) and 2 materials (titanium grade 2 and titanium grade 4). Yield strength and fracture strength were evaluated with a computer-controlled Universal Testing Machine, and failed implant assemblies were classified and analyzed by optical microscopy. The data were analyzed using the One-way analysis of variance (ANOVA) and Student's t-test with the level of significance at P=.05. RESULTS. The group $IT4_S$ had the significantly highest values and group IT2 the lowest, for both yield strength and fracture strength. Groups $IT4_N$ and ET4 had similar yield and fracture strengths despite having different connection designs. Group MT2 and group IT2 had significant differences in yield and fracture strength although they were made by the same material as titanium grade 2. The implant system of the similar fixture-abutment interfaces and the same materials showed the similar characteristics of deformation. CONCLUSION. A longer internal connection and titanium grade 4 of the implant system is advantageous for static overloading condition. However, it is not only the connection design that affects the stability. The strength of the titanium grade as material is also important since it affects the implant stability. When using the implant system made of titanium grade 2, a larger diameter fixture should be selected in order to provide enough strength to withstand overloading.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.297-309
• /
• 2010

The objective of the present study was to perform a fracture analysis on fractured implant fixture after use in vivo and make clear the cause & mechanisms of failure. In case of fatigue fracture, the fractured surface represents fatigue striation. Fatigue striation indicate the progression of the crack front under cyclic loading, are characteristic of stage 2 crack growth. The site of crack initiation and stage 1 crack growth were not easily identified in any of the failure, presumably because of the complex microstructural features of the polycrystalline sample. In case of fractured by overload, dimpled or cleavage surface were observed. Using the interpretation of characteristic markings(ratchet mark, fatigue striation, dimple, cleavage et al) in fracture surfaces, failure events containing the crack origin, crack propagation, material deficiency could be understand.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.862-868
• /
• 2013

The mechanics of woven fabric-based laminated composites is complex. Then, many researchers have studied woven fabric CFRP materials but fracture resistance behaviors for composites have not been still standardized. It also shows the different behavior according to load and fiber direction. Therefore, there is a need to consider fracture resistance behavior in conformity with load and fiber direction at designing structure using woven CFRP materials. In this study, therefore, the tensile strength and resistance for plain-weave CFRP composite materials were investigated under various different angle condition(load to fiber angle: $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$). Tensile strength and fracture toughness tests were carried out under mode I transverse crack opening load by using compact tension specimens.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.6
• /
• pp.528-533
• /
• 2012

Objective : In the pediatric population the skull has not yet undergone ossification and it is assumed that the diagnostic rate of skull fractures by simple X-rays are lower than that of adults. It has been recently proposed that the diagnostic rates of skull fractures by 3-dimensional computer tomography (3D-CT) are higher than simple X-rays. The authors therefore attempted to compare the diagnostic rates of pediatric skull fractures by simple X-rays and 3D-CTs with respect to the type of fracture. Methods : One-hundred patients aged less than 12 years who visited the Emergency Center for cranial injury were subject to simple X-rays and 3D-CTs. The type and location of the fractures were compared and Kappa statistical analysis and the t-test were conducted. Results : Among the 100 pediatric patients, 65 were male and 35 were female. The mean age was $50{\pm}45$ months. 63 patients had simple skull fractures and 22 had complex fractures, and the types of fractures were linear fractures in 74, diastatic fractures 15, depressed fractures in 10, penetrating fracture in 1, and greenstick fractures in 3 patients. Statistical difference was observed for the predictive value of simple skull fractures' diagnostic rate depending on the method for diagnosis. A significant difference of the Kappa value was noted in the diagnosis of depressed skull fractures and diastatic skull fractures. Conclusion : In the majority of pediatric skull fractures, 3D-CT showed superior diagnosis rates compared to simple skull X-rays and therefore 3D-CT is recommended whenever skull fractures are suspected. This is especially true for depressed skull fractures and diastatic skull fractures.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.66-81
• /
• 2011

In this study, it was aimed to develop a thermal-hydraulic-mechanical coupled fracture mechanics code that models a fracture initiation, propagation and failure of underground rock mass due to thermal and hydraulic loadings. The development was based on a 2D FRACOD (Shen & Stephasson, 1993), and newly developed T-M and H-M coupled analysis modules were implemented into it. T-M coupling in FRACOD employed a fictitious heat source and time-marching method, and explicit iteration method was used in H-M coupling. The validity of developed coupled modules was verified by the comparison with the analytical result, and its applicability to the fracture initiation and propagation behavior due to temperature changes and hydraulic fracturing was confirmed by test simulations.

• Clinics in Shoulder and Elbow
• /
• v.22 no.2
• /
• pp.87-92
• /
• 2019

Background: This study was conducted to compare the radiological and clinical outcomes of internal fixation using a Polarus humeral nail for treatment of a humeral shaft fracture according to fracture types. Methods: From 43 patients, 13 were excluded and 30 patients were included. The 30 patients were divided into 2 groups: 15 in group I (Orthopaedic Trauma Association/Arbeitsgemeinschaft $f{\ddot{u}}r$ Osteosynthesefragen classification type A and B) and 15 in group II (type C). The mean age was 63.1 years (range, 20-87 years), and mean follow-up period was 2.3 years (range, 1.0-6.1 years). The causes of injuries were as follows: 12, traffic accidents; 14, simple slips; 2, simple falls; 2, contusions after lower energy trauma. Radiological and clinical evaluations were performed. Results: Radiological union was confirmed by plain anteroposterior and lateral radiographs on average of 5.0 months in group I, and 8.4 months in group II, respectively. Differences between the two groups were statistically significant (p<0.01). The clinical union value was 1.6 in group I, and 2.0 months in group II, but these values did not differ significantly (p=0.441). The mean Korean shoulder scoring system scores were 89.7 and 90.6, which did not differ significantly (p=0.352). Conclusions: Intramedullary nailing using the Polarus humeral nail is considered to be a good treatment modality for all types of humeral shaft fractures. Additionally, the Polarus humeral nail can be an optimal choice for the treatment of complex type fractures such as segmental or comminuted humeral shaft fractures.

• Archives of Craniofacial Surgery
• /
• v.23 no.2
• /
• pp.89-92
• /
• 2022

Post-traumatic pseudoaneurysms of internal maxillary artery are rare, but may be life-threatening. When arterial damage leads to pseudoaneurysm formation, delayed intractable epistaxis can occur. We report our experience with the diagnosis and management of a ruptured internal maxillary arterial pseudoaneurysm that was discovered preoperatively in a patient with a zygomaticomaxillary complex (ZMC) fracture. He presented to the emergency room with epistaxis, which ceased shortly, and sinus hemorrhage was observed with a fracture of the posterior maxillary wall. The patient was scheduled for open reduction and internal fixation (ORIF) of the ZMC fracture. However, immediately before surgery, uncontrolled epistaxis of unknown origin was observed. Angiography indicated a pseudoaneurysm of the posterior superior alveolar artery. Selective endovascular embolization was performed, and hemostasis was achieved. After radiologic intervention, ORIF was successfully implemented without complications. Our case shows that in patients with a posterior maxillary wall fracture, there is a risk of uncontrolled bleeding in the perioperative period that could be caused by pseudoaneurysms, which should be considered even in the absence of typical symptoms.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.6
• /
• pp.253-258
• /
• 2014

Purpose: Maxillofacial fractures are rapidly increasing from car accidents, industrial accidents, teenaged criminal activity, and sports injuries. Accurate assessment, appropriate diagnosis, and preparing individual treatment plans are necessary to reduce surgical complications. We investigated recent trends of facial bone fracture by period, cause, and type, with the objective of reducing surgical complications. Methods: To investigate time trends of maxillofacial fractures, we reviewed medical records from 2,196 patients with maxillofacial fractures in 1981~1987 (Group A), 1995~1999 (Group B), and 2008~2012 (Group C). We analyzed each group, comparing the number of patients, sex ratio, age, fracture site, and etiology. Results: The number of patients in each period was 418, 516, and 1,262 in Groups A to C. Of note is the increase in the number of patients from Group A to C. The sex ratios were 5.6:1, 3.5:1, and 3.8:1 in Groups A, B, and C. The most affected age group for fracture is 20~29 in all three groups. Traffic accidents are the most common cause in Groups A and B, while there were somewhat different causes of fracture in Group C. Sports-induced facial trauma was twice as high in Group C compared with Group A and B. Mandible fracture accounts for a large portion of facial bone fractures overall. Conclusion: We observed an increase in facial bone fracture patients at Kyungpook National University Dental Hospital over the years. Although facial injury caused by traffic accidents was still a major cause of facial bone fracture in all periods, the percentage decreased. In recent years, isolated mandible fracture increased but mandible and mid-facial complex fracture decreased, possibly because of a reduction in traffic accidents.