• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.19-26
• /
• 2003

In the face of the deterioration of tobacco manufacturing plant, we've got the plan for now manufacturing factory for the competitiveness, modernization, rationalization and environment. To achieve the goals, it was necessary to plan and investigate in the early stage of project. Consequently. We determined to introduce the CM in the early stage. We Performed the whole phase of CM services front the pre design phase services like feasibility analysis of site and building, plant master plan, selection of manufacturing facilities and drawing up the RFP, to maintenance management phase after the completion of a construction work. Contrary to the another CM projects, YongJu New Tobacco Manufacturing Plant CM organized the CM team with expert in field before the design development. This study analyze and evaluate the CM services of YongJu project which performed on the pre design phase. The purpose of this study is to emphasize the importance of pre design phase CM and support that CM services will start from the pre design phase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1006-1014
• /
• 2020

Consumer expectations for drama VFX increased as the influx of overseas dramas increased due to the growth of OTT service, but the current production time of the drama production system has a negative effect on the quality and completion of work. This paper proposes a background rendering using a game engine and a subject rendering using background HDRI as environmental lighting. The proposed workflow is expected to reduce the production time of VFX and improve the quality of VFX. The proposed workflow was verified in 3 steps. Comparing game engine and rendering software according to the same lighting environment and camera distance, comparing rendering with existing rendering method and background HDRI generation, and validating the proposed workflow. For verification, quantitative evaluation was performed using Structual similarity index and histogram. This study is expected to be one of the options to improve the quality of VFX and improve the risk.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.715-719
• /
• 2007

Recently, since there appear the quality improvement in both educational and cultural level at the college campus also, thus the lecture room is requiring by the students where the intimacy degree among the students can be raised, also a smoother interaction between the professor and the student is able to be generated. Particularly in case of College of Music, the Practical Technique Training Rooms such as Orchestral Music Room, Pipe Music Concert Room, Music-Part Practice Room are more important for the interaction between Professor and Student or Student attends at the lesson, than the lecture rooms of any other colleges. Likewise, while such music practice room should be designed with consideration of the acoustic characteristics, so as to obtain the feel as if hear it performs at a music hall, but since the most of music practice room was designed with consideration of the convenience of construction work and its economical efficiency only, it has been exposed with many acoustic defects after the completion of construction. Therefore in this thesis, it has grasped the physical acoustic characteristics on the object of the two orchestral music rooms, pipe music concert room and ensemble practice room, among the newly constructed practice rooms of the Music College, W University, and it is considered that it could be utilized as the fundamental data on the base of this material when designing of the college music practice room, for the future.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.355-360
• /
• 2002

ElectroSlag Strip Overlaying (ESSO) process has been around since 1970. ESSO process had limited acceptance due to a few problems associated with the use of this process in its very early stage. Limited knowledge and, most significantly, poor quality of the equipment and welding flux gave the ESSO process a bad name. However, this process is well accepted today and used in North America, Europe and Japan. The ESSO process provides low dilution overlays at high deposition rates, excellent and consistent deposit chemistry with excellent surface quality, and virtually no defects. Capitan has taken this process one step further through extensive research and development of the process itself as well as the equipment. The improvement brought to the process warranted the issuance in May 2000 of an US patent. This study demonstrates the feasibility of this process with immediate positive production results. The main achievements of this work are as follows: $\textbullet$ Development of six various strip-flux combinations on three different base materials: carbon steel, $\frac{1}{4}$ Cr/.5 Mo and 2 $\frac{1}{4}$ Cr/l Mo, fully tested with: penetrant, ultrasound, bends, hardness, overlay chemistry, corrosion and hydrogen disbonding. $\textbullet$ 12" dia. 90 hot formed elbows from straight pipe electroslag overlayed with "1 layer" and "2 layer" Alloy 625 $\textbullet$ a very unique development of miniaturized overlaying equipment able to perform overlay in pipe with diameters as low as 10" (254 mm). This development has large applications in the field of offshore, petrochemical, refining, pulp and paper and power generation industries. The aftermath of this development was its immediate acceptance by major end users with the completion of four projects of overlayed pipe in the USA and Far East Asia.

• Culinary science and hospitality research
• /
• v.23 no.4
• /
• pp.193-202
• /
• 2017

This study conducted a survey on 414 industrial organization food service workers in the Kyungnam area to find out the effect relationship of the job characteristics of organization food service workers and its effects on job commitment and job satisfaction by recognizing the need for job application through the job characteristic model, which was the beginning of the intrinsic motivation theory for the job of organization food service workers. To accomplish the purpose of this study, the method to analyze the survey was undertaken by using the SPSS 23.0 and Amos 21.0 statistic package program via a data coding process for collected data processing. We can confirm from the analysis results that there is a statistically significant causal relationship in all factors, except task identity, which is a sub factor of job characteristic. This result reaffirms the results of previous research by showing that the worker must be allowed to ensure completion of the entire job when performing the job as the job itself is not one part of the processes. Decision-making autonomy must be given in the work process when the worker performs their job in order to raise job satisfaction and furthermore to increase job commitment. The limitation of this study is that there are limits that making generalization as the study was conducted on industrial organization food service workers in the Kyungnam area as extracted samples.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.1 s.15
• /
• pp.85-95
• /
• 2000

There is a recent emphasis on the need for updating and revision of existing digital maps as more digital maps are used and produced. Various type of data sources, such as photographs, ground surveyed data and satellite images, are used in the revision and the updating process. The process is very time consuming and costly, especially for small regional areas. This study, attempts to present an effective update/revision method using the as-built surveying drawings and the accuracy of the digital map which has been updated and revised using this method was also investigated. This study showed that by using as-built surveying drawings of scale 1/1,200 to update a digital map of scale 1/1,000, the resulting accuracy satisfied the requirements of the national digital map accuracy specification for the corresponding scale. The necessity of the existence of the necessary drawings and maps is a requirement of this process and it is also suggested that densification of local control points especially in the urban areas is necessary for producing accurate as-built surveying drawings. This would require the establishment of rules and regulations which would require constructions to perform as-built surveying, immediately after the construction has been completed.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.23-29
• /
• 2021

The purpose of this study is to reduce the probability of occurrence of electric fires as a preemptive preventive measure, and to strengthen the capability of preventing electric fires by strengthening the cooperative function between electric fire-related departments and establishing a cooperative system. In this study, the general aspects of electric fires were identified by reviewing the literature such as ignition mechanisms of electric fires. And the major electrical fires that occurred in the last 10 years were classified into ignition factors (short circuit, overload/overcurrent, and earth leakage/ground fault) and ignition sources (wiring/wiring appliances, electrical equipment/household appliances). And the 4M technique was used to analyze the potential causes of ignition at the fire site and to suggest preventive measures. In the case In this study, out of 48 electrical fires in the past 10 years, 16 short-circuit fires, 3 overload/overcurrent fires, 3 short-circuit and earth fault fires, 16 fires in wiring/wiring appliances, and 10 fires in electrical equipment/home appliances classified as cases. And prevention measures were presented in terms of human, machine, media, and management by using the 4M technique. For the preemptive prevention of electric fires, strengthening the compulsory electrical safety inspection and making it mandatory to report when new or expanding electric facilities, charging a fee for electric safety inspection for detached houses and granting benefits subject to inspection completion, improvement of the electric safety voluntary inspection table and safety indications; It was suggested as a policy to organize and operate electrical safety inspection personnel in a two-person team (mixed), establish a close work cooperation system with related organizations, and strengthen electrical safety education and publicity.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.4 s.20
• /
• pp.87-96
• /
• 2004

The construction duration in apartment construction is an important factor which affects project cost. Henceforth, the time shortening is essential to retrench project cost and project risk when there adopt Five-Day Workweek and introduce apartment sales after completion of construction. Therefore, the purpose of this study is to examine closely the affecting factors on the duration of framework which forms about $40\sim50\$ percent of total time in apartment construction by analyzing the schedule mechanism of typical floor and to show the reasonable time shortening methods by case study. The shown schedule mechanism and basic schedule table can utilize as a guideline in case of scheduling of framework in the existing construction method. Also, the shown time shortening methods by three case studies will guide the direction and process of time shortening while there need time shortening in many-sided projects.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.49-61
• /
• 2020

Recently, the convergence of genre-mixed collaboration and technology-mixed collaboration in performance art strategically fuses different goals and different properties, satisfying anticipated demand, and developing into experimental forms that bring out convergence contents of new value. To supplement problems of convergence attempts and heighten levels of completion, the effective collaborative processes of media experts must be studied and improved. This thesis attempts to study effective collaborative production plans of convergence performance that correspond to the demands of the times through multimedia convergence performance prototypes(Live performance play + Pre-made digital animation). It categorizes performance production processes into pre-production and production and researches the effective collaborative production processes of convergence performances that utilize these two forms of media through work selection, production direction establishment, human resource constituents, production schedule plan establishment, visualization processes, and performance practices and rehearsals. Continuous research must be conducted based on convergence performance contents planning, changes in production methods, and an understanding of distinct characteristics among convergence contents for the industrial development systemization and vitalization of convergence contents to be made possible.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.485-494
• /
• 2016

In this work, we conducted a study of fuel consumption characteristics and regenerative braking recovery rate by conducting an experiment using a TMED type parallel hybrid electric vehicle. As regenerative braking technology is considered essential to improve the energy efficiency of the hybrid vehicle, it is necessary to conduct research on the regenerative braking system. Therefore, the electrical characteristics, current balance, and fuel consumption were investigated using an EC type chassis dynamometer with experimental conditions as per IM240 mode. From the results, it was observed that when the initial SOC condition was lower, the engine operating time of the hybrid vehicle increased, and the energy efficiency decreased. While operating in the driving mode characteristics condition and the driving characteristics condition, the difference in the average fuel consumption was not significant. However, after completion of the experiment, there was a difference in the engine operation.