• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2034-2042
• /
• 2006

In this study, a complete 3D surface reconstruction method is proposed based on the concept that the vertices, of surface model can be completely matched to the unstructured point cloud. In order to generate the initial mesh model from the point cloud, the mesh subdivision of bounding box and shrink-wrapping algorithm are introduced. The control mesh model for well representing the topology of point cloud is derived from the initial mesh model by using the mesh simplification technique based on the original QEM algorithm, and the parametric surface model for approximately representing the geometry of point cloud is derived by applying the local subdivision surface fitting scheme on the control mesh model. And, to reconstruct the complete matching surface model, the insertion of isolated points on the parametric surface model and the mesh optimization are carried out. Especially, the fast 3D surface reconstruction is realized by introducing the voxel-based nearest-point search algorithm, and the simulation results reveal the availability of the proposed surface reconstruction method.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.165-168
• /
• 2010

This paper describes the results of complete Bouguer anomalies computed from the Free-air anomalies that derived from Sandwell and DNSC08 mairne gravity models. Complete bouguer corrections consist of three parts: the bouguer correction (Bullard A), the curvature correction (Bullard B) and the terrain correction (Bullard C). These all corrections have been computed over the East Sea on a $1'{\times}1'$ elevation data (topography and bathymetry) derived from ETOPO1 global relief model. In addition, a constant topographic (sea-water) density of $2,670kg/m^3$ ($1,030kg/m^3$) has been used for all correction terms. The distribution of complete bouguer anomalies computed from DNSC08 are -34.390 ~ 267.925 mGal, and those from Sandwell are -32.446 ~ 266.967 mGal in East Sea. The mean and RMSE value of the difference between DNSC08 and Sandwell is $0.036{\pm}2.373$ mGal. The highest value of complete bouguer anomaly are found around the region of $42{\sim}43^{\circ}N$ and $137{\sim}139^{\circ}E$ (has the lowest bathymetry) in both models. Theses values show that the gravity distribution of both models, DNSC08 and Sandwell, are very similar. They indicate that satellite-based marine gravity model can be effectively used to analyze the geophysical, geological and geodetic characteristics in East Sea.

• Journal of the Korean Statistical Society
• /
• 제36권3호
• /
• pp.435-445
• /
• 2007

This paper addresses for the first time the use of complete data information criteria in unsupervised learning of the Naive-Bayes model. A Monte Carlo study sets a large experimental design to assess these criteria, unusual in the Bayesian network literature. The simulation results show that complete data information criteria underperforms the Bayesian information criterion (BIC) for these Bayesian networks.

• 한국터널지하공간학회 논문집
• /
• 제20권5호
• /
• pp.757-772
• /
• 2018

최근 경주 포항 등 대도시에서 지진이 발생하고 이에 각 분야에서의 내진해석 연구가 활발히 진행되고 있다. 하지만 대부분의 기존 내진해석은 지상구조물과 지반을 따로 다루었기 때문에 지반과 구조물의 완전한 상호 동적거동에 대한 연구가 부족한 실정이다. 따라서 본 연구에서는 건물만 고려하는 지하구조물 고정단 모델과 건물과 지반을 함께 고려하는 연속체 모델을 각각 적용하기 위해 MIDAS GEN 및 MIDAS GTS NX를 이용하여 민감도 분석을 수행하고 SSI를 고려한 동적해석의 타당성을 살펴보았다. 연구 결과, 대부분의 조건에서 지하구조물 고정단 모델이 연속체 모델보다 초고층 건물의 최대 순수 수평변위를 더 작게, 휨응력을 더 크게, 또한, 취약부의 범위는 더 작게 산출하는 것으로 나타났다. 따라서 내진해석 시 지반-구조물 상호작용을 고려한 연속체 모델을 사용하는 것이 보다 타당할 것으로 판단된다.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.570-577
• /
• 2005

In this study a complete 3D surface reconstruction method is proposed based on the concept that the vertices of surface model can be completely matched to the unstructured point cloud. In order to generate the initial mesh model from the point cloud, the mesh subdivision of bounding box and shrink-wrapping algorithm are introduced. The control mesh model for well representing the topology of point cloud is derived from the initial mesh model by using the mesh simplification technique based on the original QEM algorithm, and the parametric surface model for approximately representing the geometry of point cloud is derived by applying the local subdivision surface fitting scheme on the control mesh model. And, to reconstruct the complete matching surface model, the insertion of isolated points on the parametric surface model and the mesh optimization are carried out Especially, the fast 3D surface reconstruction is realized by introducing the voxel-based nearest-point search algorithm, and the simulation results reveal the availability of the proposed surface reconstruction method.

• 가정과삶의질연구
• /
• 제20권1호
• /
• pp.45-56
• /
• 2002

The main purposes of this article are to introduce the theoretical backgrounds and empirical application methods of two different Models for the function of expenditure, and to compare the goodness-o(-fit of the two models: a single-equation model and a complete-system-of-demand-equation model. For the empirical analysis of the single-equation model, a linear formula and a double-leg formula were employed. In order to test the complete-system-of-demand-equation model empirically, the \"Linear Approximation/Almost Ideal Demand System (LA/AIDS)" was used. The independent variables were the total living expense and expenditure categories Price index. The data used in this study were obtained from the quarterly statistics of "The Annual Report on the Urban Family Income and Expenditure Survey (Dosigagyeyonbo)" and "The Annual Report on the Consumer Price Index (Sobijamulgajaryo)," for the years 1994 to 1997. The goodness-of-fit (R-square) was higher with the complete-system-of-demand-equation model than with the single-equation model for the budget share on food (excluding eating-out expenses) and for the share on cultural and recreational activities. However, there was no difference between the two models in terms of the proportion of the expenditure on automobile fuel.fuel.

• 대한치과기공학회지
• /
• 제43권2호
• /
• pp.48-55
• /
• 2021

Purpose: This study aimed to analyze deformation according to post-curing of complete arch artificial teeth for temporary dentures printed with a digital light processing (DLP) printer. Methods: An edentulous model was prepared and an occlusal rim was produced. The edentulous model and occlusal rim were scanned using a model scanner. A complete denture was designed using a dental computer-aided design, and the denture base and artificial tooth were separated. Ten complete arch artificial teeth were printed using a 3D printer (DLP). Complete arch artificial teeth was classified into the following three groups: a group no post-curing (NC), a group with 10 minutes post-curing (10M), and a group with 20 minutes post-curing (20M). Specimens were scanned using a model scanner. The scanned data were overlapped with the reference data. Statistical analysis was performed using one-way ANOVA analysis of variance, Kruskal-Wallis test, and Mann-Whitney U test (α=0.05). Results: Regarding the overall deviation of complete arch artificial teeth, the NC group showed the lowest mean deviation of 111.13 ㎛ and the 20M group showed the highest mean deviation of 131.03 ㎛. There were statistically significant differences among the three groups (p<0.05). Conclusion: The complete arch artificial tooth showed deformation due to post-curing. In addition, the largest shrinkage deformation was observed at 10 minutes of post-curing, whereas the least deformation was observed at 20 minutes.

• 대한수학회보
• /
• 제57권1호
• /
• pp.51-68
• /
• 2020

In this paper, the author considers the nonparametric regression model with negatively orthant dependent random variables. The wavelet procedures are developed to estimate the regression function. For the wavelet estimator of unknown function g(·), the almost sure consistency is derived and the complete consistency is established under the mild conditions. Our results generalize and improve some known ones for independent random variables and dependent random variables.

• 한국경영과학회지
• /
• 제19권1호
• /
• pp.41-52
• /
• 1994

Imprecision of evaluation or lack of prior information about preference can be an obstacle for decision maker in representing his strict preference. Therefore, fuzziness of preference can take place, and in addition, intransitivity or incomparability of preference becomes the critical difficulty in making complete preorder of alternatives. In order to get better solution and to improve practical usufulness, MCDM should be established as a pseudo-criterion model that include fuzzy preference. In this paper, we suggest a pseudo-criterion model that can make complete preorder of alternatives by metric distance measure.

• 대한수학회지
• /
• 제58권2호
• /
• pp.327-349
• /
• 2021

In this paper, we main study the strong law of large numbers and complete convergence for weighted sums of asymptotically almost negatively associated (AANA, in short) random variables, by using the Marcinkiewicz-Zygmund type moment inequality and Roenthal type moment inequality for AANA random variables. As an application, the complete consistency for the weighted linear estimator of nonparametric regression models based on AANA errors is obtained. Finally, some numerical simulations are carried out to verify the validity of our theoretical result.