• Clinical and Experimental Reproductive Medicine
• /
• 제37권4호
• /
• pp.369-375
• /
• 2010

드문 기형인 두 개의 자궁 경부와 세로막 질 중격을 가지고 있는 완전 중격 자궁인 경우 자궁경으로 양측 자궁강을 각각 관찰할 때 중격의 정확한 위치와 길이를 측정하기가 어렵고 시술 시 중격 제거의 시점과 중격 제거의 길이와 방향 및 종점을 잡기가 매우 어렵다. 이에 methylene blue를 넣은 풍선을 이용한 중격 제거술에 관해 소개하고 2년 이상의 불임 기간을 가지고 있는 완전 중격 자궁 환자 3예에 있어서 이 수술을 이용하여 좋은 산과적 결과를 보인 증례를 보고하고자 한다.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권7_8호
• /
• pp.381-386
• /
• 2003

본 논문에서는 완전이진트리의 3차원 메쉬로의 임베딩 문제를 다룬다. 링크 충돌을 2까지 허용하면서 최적크기의 메쉬에 임베딩하는 방법은 [1]에서 다루고 있으며, [2]에서는 최적크기의 1.27배의 메쉬로 임베딩하는 방법을 보여주고 있다. 본 논문에서 제안하는 임베딩 방법은 순위차원 라우팅을 사용하며 링크 충돌이 없는 방법으로, 약 1.125배의 최적확장을 넘지 않는다. 이 임베딩 방법은 링크의 충돌 혹은, 임베딩의 확장을 최소화한다는 기준에서 볼 때 기존의 임베딩 방법에 비해 향상된 결과이다.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.953-967
• /
• 2017

In this paper, a complete station blackout (SBO) or complete loss of electrical power supplies is simulated and analyzed in a downward cooling 5-MW pool-type Material Testing Reactor (MTR). The scenario is traced in the absence of active cooling systems and operators. The code nodalization is successfully benchmarked against experimental data of the reactor's operating parameters. The passive heat removal system includes downward water cooling after pump breakdown by the force of gravity (where the coolant streams down to the unfilled portion of the holdup tank), safety flapper opening, flow reversal from a downward to an upward cooling direction, and then the upward free convection heat removal throughout the flapper safety valve, lower plenum, and fuel assemblies. Both short-term and long-term natural core cooling conditions are simulated and investigated using the RELAP5 code. Short-term analyses focus on the safety flapper valve operation and flow reversal mode. Long-term analyses include simulation of both complete SBO and long-term operation of the free convection mode. Results are promising for pool-type MTRs because this allows operators to investigate RELAP code abilities for MTR thermal-hydraulic simulations without any oscillation; moreover, the Tehran Research Reactor is conservatively safe against the complete SBO and long-term free convection operation.

• 정보보호학회논문지
• /
• 제14권2호
• /
• pp.57-68
• /
• 2004

본 논문에서는 UOWHF의 도메인을 확장하기 위한 새로운 병렬 처리 알고리즘을 제안한다. 제시되는 알고리즘은 non-complete l-ary tree 에 기반을 두고 있으며 현재까지 최적의 키 길이를 가진 유일한 알고리즘인 Shoup 의 알고리즘과 동일한 최적의 키 길이를 가진다. 또한 Sarkar의 결과를 이용하여 본 논문에서 제시되는 알고리즘이 Shoup의 알고리즘과 함께 Sarkar가 제시한 도메인 확장 알고리즘들의 커다란 집합 중에서 가장 최적화된 키 길이를 가짐을 증명한다. 그러나 제안 알고리즘의 병렬처리능력은 complete tree에 기반 한 구성 방법들 보다 약간 비효율적이다. 그러나 만약 l이 점점 커진다면 알고리즘의 병렬처리능력도 complete tree 에 기반 한 방법들에 가까워진다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권5호
• /
• pp.392-400
• /
• 2011

Purpose: Cleft lip and palate is one of the most frequent hereditary deformities of the maxillofacial region which can arise in facial and jaw abnormalities as well as malocclusion and speech problems. In particular, unilateral cleft lip and palate is characterized by midface deformity resulting in maxillary anterior nasal septal deviation and nasal deformity. The aim of this study is to analyze the facial deformity of untreated unilateral cleft lip patients for contribution to primary cheiloplasty. Methods: Thirty-three patients with unilateral cleft lip and palate were impressioned before operation and facial casts were made. The casts were classified into complete cleft lip and incomplete cleft lip groups and each group were classified into affected side and normal side. Anthropometric reference points and lines were setted up and analysis between points and lines were made. Results and Conclusion: The obtained results were as follows: 1. The intercanthal width had no significant difference between the incomplete and complete cleft lip groups. 2. Cleft width and alar base width were greater in the complete group, and nasal tip protrusion was greater in the incomplete group. 3. Involved alar width and nostril width were greater in the complete group and in both complete and incomplete groups, involved alar width and nostril width were greater than the non-involved side. 4. The lateral deviation of the subnasale was greater in the complete group in both involved and non-involved sides. 5. The nasal laterale was placed inferiorly in both cleft groups. 6. The subnasale was deviated to the non-involved side in both cleft groups. 7. The nose tip was deviated to the non-involved side in both cleft groups and had greater lateral deviation in the complete cleft group. 8. The midpoint of cupid's bow had no vertical difference between complete and incomplete groups, but had a greater lateral deviation in the complete group. 9. In the complete cleft group, correlation between differences in cleft width and nostril width and columella height difference were obtained.

• 구강회복응용과학지
• /
• 제31권1호
• /
• pp.45-49
• /
• 2015

본 증례는 기존의 국소의치에서 파절된 metal-ceramic surveyed crown을 complete contour zirconia surveyed crown으로 전환하는 간단하고 편리한 CAD/CAM 기술을 보고하고 있다. 항암치료를 받고 있는 환자의 기존 metal-ceramic surveyed crown 외형, 형태학적 특성, 레스트 시트를 complete contour zirconia surveyed crown으로 제작하는 복제 기법에 대해 보고한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권12호
• /
• pp.1721-1725
• /
• 2012

A growth and digestibility study was conducted using Osmanabadi goat male kids by feeding complete diets in the form of mash or expander extruded pellets containing different levels of red gram (Cajanus cajan) straw (RGS). Two iso-nitrogenous complete diets were prepared by incorporating RGS at 35% and 50% levels. Half the quantity of each complete mash feed was then converted into pellets through expander extruder processing. Thirty two kids of 4 to 5 months age were divided into four groups of eight each and were fed for 150 d with four experimental diets (T1: mash with 35% RGS, T2: mash with 50% RGS, T3: pellets with 35% RGS and T4: pellets with 50% RGS). Pelleting of complete diets significantly (p<0.001) increased the voluntary feed intake (671.45 vs 426.28 g/d) at both levels of RGS in the feeds. Average daily gain (ADG, g/d) also increased significantly (p<0.001) from 48.79 in kids fed mash diet to 71.29 in those fed with pelleted diets. Feed conversion efficiency (dry matter (DM) intake: weight gain) was comparable among all the treatment groups. Digestibility of nutrients was not affected by pelleting of the feeds whereas, increasing the level of inclusion of RGS in feeds from 35% to 50% decreased (p<0.05) the digestibility of DM and crude protein (CP) resulting in lower (p<0.001) metabolizable energy (ME) content (MJ/kg DM) in feeds with 50% RGS (7.93 vs 8.75). Daily intake (MJ/kg $BW^{-0.75}$) of ME decreased (p<0.05) in feeds containing 50% RGS while pelleting of feeds increased (p<0.05) the intake of DM, CP, digestible crude protein (DCP) and ME. It is inferred that expander extruder pelleting can efficiently utilize RGS up to 50% level in complete diets for growing goat kids.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.286-318
• /
• 1992

The objective of preventive dentistry is the maintenance of a healthy dentition for the life of a patient. Unfortunately, if an individual has not received the benefit of a comprehensive program of preventive dentistry and has finally reached the edentulous state, as a consequence, he receives a set of complete denture. Dentures are mechanical devices and subject to the principles of mechanics. In some cases, the general health and nutritional status of the patient are felt to be the causative factors. But, the most important thing in residual ridge resorption is felt to be caused by the unequal distribution of functional forces. This study was to analyze mandibular stresses of complete denture occlusion by three dimensional finite element method. The results were as follows ; 1. As deformation and stress distribution of the complete denture of the mandible were concentrated on the upper lingual side of the mandible, alveolar ridge resorption of the mandible occurred from lingual side to labio-buccal side. 2. Analyzing by three dimensional F. E. M., the mandible is a very effective form for tolerating stress and deformation biomechanically. 3. According to the concentration of stress distibution in the upper buccal side of the lower posteriors, buccal shelf area must be a primary stress bearing area in the lower complete denture. 4. Lower complete denture moved horizontally to the balancing side under lateral occlusal force. 5. Bilateral balanced occlusion should be constructed in the complete denture for denture stability, especially in the protrusive movement. 6. Physical property of the denture base material was as important for stress distribution in the denture base as or even more than that in the mandible. 7. Impression technique is very important because of most of stress was concentrated between them due to close contact of the mandible and the denture base.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.409-415
• /
• 2013

PURPOSE. The midline fracture of maxillary complete dentures is a frequently encountered complication. The purpose of this study was to assess the effect of frenulum height on midline strains of maxillary complete dentures. MATERIALS AND METHODS. A removable maxillary complete denture was fabricated and duplicated seven times. Four different labial frenulum heights were tested for stresses occurring on the palatal cameo surface. The strains were measured with strain gauges placed on 5 different locations and the stresses were calculated. To mimic occlusal forces bilaterally 100 N of load was applied from the premolar and molar region. RESULTS. A statistically significant association between the height of the labial frenulum and the calculated stresses and strains was shown (P<.05) predominantly on the midline and especially on the incisive papilla. The results showed that stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. CONCLUSION. Within the limitations of this in vitro study, it can be concluded that the stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. Surgical or mechanical precautions should be taken to prevent short-term failure of maxillary complete dentures due to stress concentration and low cycle fatigue tendency at the labial frenulum region.

• 한국물환경학회지
• /
• 제30권2호
• /
• pp.166-174
• /
• 2014

Velocity gradient, G, a measure of the average velocity gradient in the fluid has been applied for complete mixing of chemicals in mechanical mixing devices. G values were calculated by the power input transferred to fluid in turbulent and transient range. Chemical reactions occur so fast that total mass transfer time required for even distribution of the chemicals determine the overall reaction time. The total mass transfer time is composed of the time for complete mixing through the reactor and for diffusion of the chemicals into the eddy. Complete mixing time was calculated by CFD (computer fluid dynamics) and evaluated by tracer tests in 2 liter jars at different rotating speeds. Turbulent range, Reynolds number above 10,000 in regular 2 liter jars occurred at revolution speed above 100 rpm (revolution per minute), while laminar range occurred at revolution speed below 10 rpm. A typical range of rotating speed used in jar tests for water and wastewater treatment was between 10 and 300 rpm, which covered both transient and turbulent range. G values supplied from a commercial jar test apparatus showed big difference from those calculated with power number specially in turbulent range. Diffusion time through eddy decreased 1.5 power-law of rotating speed. Complete mixing time determined by pumping number decreased increases in rotating speed. Total mass transfer time, finally, decreases as rotating speed increases, and it becomes 1 sec at rotating speed of 1,000 rpm. Complete mixing times evaluated from tracer tests showed higher than those calculated by power number at higher rotating speed. Complete mixing times, however, calculated by CFD showed similar to those of experimentally evaluated ones.