• 한국어류학회지
• /
• 제9권2호
• /
• pp.228-234
• /
• 1997

본 연구는 한강수계에 서식하는 황쏘가리와 쏘가리의 별종 또는 종내 변이에 대한 정확한 분류학적 지위를 알기 위하여 형태형질 및 염색체를 비교 연구하였으며, 교배실험도 실시하였다. 두 집단의 형태형질 중 체색에는 차이가 있었으나, 측선린수가 90~98개, 등지느러미의 극조와 연조수가 각각 12와 13개, 뒷지느러미의 극조와 연조가 각각 3개와 9~10개, 가슴지느러미가 15개로 나타나 뚜렸한 차이가 없었다. 염색체수도 두 집단 모두 2n=48로 같게 나타났으며, 핵형에 있어서도 submetacentric chromosome이 2쌍, acro 또는 telocentric chromosome이 22쌍으로 나타났고, 2종 모두 fundamental number가 52로 동일했다. 교배실험에서도 두 집단이 동일하게 정상적으로 발생되어, 별종일 가능성은 없었다. 황쏘가리의 체색은 부화 후 50일부터 혹색소포가 줄어 들다가 60일이 지나면 몸의 체색이 완전히 황색으로 변하였다. 따라서 본 연구 결과는 지금까지 국명과 종명이 다르게 사용되고 있는 황쏘가리와 쏘가리는 동일한 종이고, 체색의 차이는 유전적으로 변이된 albino 현상으로 추정된다.

• Advances in aircraft and spacecraft science
• /
• 제6권3호
• /
• pp.225-238
• /
• 2019

A spike attached to a blunt nosed body significantly alters its flow field and influences the aerodynamic coefficients at hypersonic speed. The basic body is an axisymmetric, with a hemisphere nose followed by a cylindrical portion. Five different types of spikes, namely, conical aerospike, hemisphere aerospike, flat-face aerospike, hemisphere aerodisk and flat-face aerodisk are attached to the basic body in order to assess the aerodynamic characteristic. The spiked blunt body without the aerospike or aerodisk has been set to be a basic model. The coefficients of drag, lift and pitching moment were measured with and without blunt spike body for the length-to-diameter ratio (L/D) of 0.5, 1.0, 1.5 and 2.0, at Mach 6 and angle of attack up to 8 degrees using a strain gauge balance. The measured forces and moment data are employed to determine the relative performance of the aerodynamic with respect to the basic model. A maximum of 77 percent drag reduction was achieved with hemisphere aerospike of L/D = 2.0. The comparison of aerodynamic coefficients between the basic model and the spiked blunt body reveals that the aerodynamic drag and pitching moment coefficients decrease with increasing the L/D ratio and angle of attack but the lift coefficient has increasing characteristics.

• 산업융합연구
• /
• 제22권5호
• /
• pp.79-88
• /
• 2024

이 연구의 목적은 청소년의 신체활동과 주관적 건강인지와의 관계를 알아보고 그 관계에서 비만 관련 지표인 체질량 지수(BMI)가 매개효과 혹은 조절효과가 있는지 규명하는 것이다. 이 연구의 목적을 달성하기 위해 2022년 제18차 청소년건강행태온라인조사 통계의 원시자료를 활용하였으며, 최종적으로 23,612명의 자료를 연구 대상으로 선정하였다. 자료 분석은 확인적 요인분석과 구조방정식 모형을 적용하였으며, 매개효과를 검증하기 위해 Bootstrapping 기법을 활용하였다. 또한 조절효과를 검증하기 위해 구조방정식모형의 다중집단 분석을 적용하여 pairwise parameter comparison 값을 산출하였다. 모든 통계적 유의수준은 .05로 설정하였다. 이 연구의 결과는 다음과 같다. 첫째, 청소년의 신체 활동량이 많을수록 주관적 건강 인식은 긍정적인 효과가 있는 것으로 나타났다. 둘째, 신체활동과 주관적 건강 인식 관계에서 주관적 체형 인식은 부분매개효과 있는 것으로 나타났다. 셋째, 신체활동과 주관적 건강 인식에서 주관적 체형은 조절효과가 있는 것으로 나타났으며, 구체적으로 주관적 체형을 보통으로 인식하는 사람이 약간 혹은 매우 살이 찐 편으로 인식하는 사람보다 신체 활동량이 많을 수록 주관적 건강 인식에 더 긍정적으로 응답하는 것으로 나타났다. 결론적으로 청소년기에는 충분한 신체활동을 통하여 비만을 예방하고, 주관적인 건강 상태를 긍정적으로 변화할 수 있도록 노력하는 것이 중요하다.

• 대한약침학회지
• /
• 제18권4호
• /
• pp.32-37
• /
• 2015

Objectives: The purpose of this study was to investigate the psychological characteristics of the Sasang constitutions by using Braverman nature assessment (BNA). Methods: One hundred seventy-four students participated in this study, and among them, the 142 individuals who had clearly identified Sasang constitutional types were used for the analysis. Sasang constitutions and the Braverman temperaments of the subjects were determined by using a questionnaire for the Sasang constitution classification (QSCC) II and BNA, respectively. Body mass index (BMI) was used to compare the inclinations of the Sasang constitutions and Braverman temperament types. Results: Significant differences in Braverman temperament type existed among the Sasang constitutions (P = 0.042), and the relations between Soyangin and the dopamine type and between Taeeumin and the gamma-aminobutyric acid (GABA) type were meaningful. Significant differences were also shown in the comparison with the Yin and the Yang constitutions (P = 0.017), and the post-hoc analysis showed a strong and significant relation between the Yang constitution and the dopamine type and between the Yin constitution and the GABA type. The one-way analysis of variance (ANOVA) and the independent t-test were conducted to examine the BMI and the degree of obesity among the Sasang constitutions and the Braverman temperament types. Concerning the BMI, Taeeumin showed a bigger BMI than the other constitutions (P < 0.001), but no significant differences in the BMI were observed between the Braverman temperament types. Conclusion: Soyangin has a close relationship to the dopamine type and Taeeumin has a close relationship to the GABA type. The correlation between two types were more clear when the Yin and the Yang types were compared to Braverman temperaments. These results may serve as a basis for identifying the psychological traits of Sasang constitutional types, especially in regard to the characteristics related to the four Braverman temperament types.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.93-108
• /
• 2008

This study held physical measurement for male subjects in their 20s living in Ningbo City, Zhejiang Province in China, showing the biggest market in men's clothes. Their representative lower body types with average shapes and sizes were chosen so as to develop men's slacks patterns with better dimension fitness. The following are the results of the analysis: 1. Slacks patterns were made based on the mean measurement values of 5 people, who were closest to the representative body types, from the index*absolute group of 47 people. The dimensions of application for slacks pattern-making were 77cm(omphalion waist circumference), 91cm(hip circumference), and 103cm(slacks length). 2. For the comparison of high-fitness and more-room pattern dimensions, 5 styles of slacks were made: Korean, Chinese, British, Japanese, and industrial. In the dressing fitness tests, industrial patterns had excellent appearance and Japanese ones had the best function. 3. Based on the analysis results of slacks pattern comparison, the target slacks were experimentally made and received superior evaluation points to the compared slacks patterns in two times of evaluation for appearance and function. 4. The final slacks pattern in this research had the following dimensions: front waist circumference: W(1-2cm with room included)/4-1cm, back waist circumference: W/4+1cm, front hip circumference: H(9$\sim$10cm with room included)/4-1cm, back hip circumference: H/4+1cm, crotch length: H/4-1.5cm, hip length: crotch length-H/12, front crotch extension: H/16-1.5cm, back crotch extension: H/8+3cm, knee line: 33cm below crotch line, front tuck amount: 4cm, back dart amount: 2.5cm(center) and 1.5cm(side), and back dart length: 10cm (center) and 6cm(side).

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.87-96
• /
• 1999

In order to examine the influence of sprue(used to make crown supplements) on casting, 3 kinds of sprue materials(wax, wood, plastic) and 3 types of sprue(round, square, triangle) were made and buried and cast, then the comparison and analysis of casting characters among sprue materials and among sprue type show the following results : 1. The comparison of casting characters in accordance with sprue materials shows wax sprue of 83.3%, wood sprue 81.3%, and plastic sprue of 80.7%, Wax sprue was the bast materials for casting, However there was no statistically significant difference of casting characters among was, plastic and wood. 2. The comparison of casting in accordance with sprue types shows square sprue of 94.0%, round sprue of 86.9% and triangle sprue of 84.2%. square sprue had a best casting character. 3. When a ring cast using wood sprue was classified from burying materials. its cutting of casting body and sprue indicated much more than any other sprue material. It seems to be caused by the influence of wood residuals and carbon occurrence.

• 복식
• /
• 제55권5호
• /
• pp.131-145
• /
• 2005

The purpose of this study is to analyze the physical characteristic by directly measuring the wheelchair using disabled women and to classify Body Type of a disabled person. The subjects were 103 disabled women of wheelchair used women and between 20 - 55 years of age The result of this study is as follow. 1. There was a remarkable difference in the physical characteristic of wheelchair using disabled women due to their cause of disability. The cause of disability was classified into the 4 groups; Poliomyelitis, Spiral Cord Injury, Muscular Dystrophy, Cerebral Palsy. 2. The result came out to be 4 factors by the factor analysis on the data of an anthropometric measurement to the wheelchair using disabled women and also cluster analyzing the factor scores, the experiment was concluded to 4 types. Type 1 came out to be a short height with the shortest legs. Type 2 was body shape which had a corpulent upper body and wide shoulder but with short and slim lower body. Type 3 has the shortest height, weak and lean upper body, small shoulders Type 4 has the largest stature and legs 3. A comparison of anthropometric measurements of wheelchair using disabled women with National Anthropometric Survey Korea(1997) was significant difference

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.437-445
• /
• 2010

This study was aimed at comparing selected joint angles at the golf address stance by categorizing three different body types. 43 elite male golfers were selected and 9 of them turned out to be the ectoderm while 24 of them to be the mesoderm. The remaining 10 subjects were the endoderm. The measurement was carried out at the address stance with the number 7 iron and the driver. The result showed that the angle of trunk flexion did not different among body types. The trunk tilting angle became more inclined to the right side, which confirmed the guidelines from most of golf lesson books, for bigger people since they tended to put more weight on the right foot. The angle of both knees showed similar but the right knee was bent more than the left knee. The target direction and body alignment faced more to the left side than the target spot because of the influence of open stance and natural aiming position. It seems that pelvis and knees turned a little bit more to the right side than the target direction in order to maintain the parallel. Overall, significant differences among body types were found at the trunk tilting angle and pelvis-target alignment and golf address configuration can be differentiate by these factors.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.242-254
• /
• 2000

Accurate impression is very important to achieve desirable prosthesis and there are many factors in taking a good impression. For example, types of impression material, types of impression tray, impression taking methods and so on. Recently individual tooth tray technique is accepted as obtaining good impression that can be applied to multiple abutment impression, heavy salivated patient, to minimize the effect of natural teeth s undercuts and to reduce pain during cord packing procedures. The purpose of this study was to compare the accuracy according to materials and forms of the individual tooth tray which is clinically applied nowadays. Used materials in experiment were divided into 3 types (acrylic resin. $Futar^{(R)}$ occlusion. $Blu-mousse^{(R)}$) and forms were divided into 2 types (forming occlusal vent hole or not and forming marginal vent space or not). Stone master model from impression body and metal master model were measured by $X-PLAN360d^{(R)}$ to compare occlusal surface discrepancy and marginal discrepancy. The results were as follows: 1. In comparison of occlusal surface discrepancy and marginal discrepancy according to materials, groups with three materials showed no statistical difference 2. In comparison of occlusal surface discrepancy and marginal discrepancy according to occlusal vent hole, groups with occlusal vent hole showed significantly less marginal discrepancy than groups with no occlusal vent hole(p<0.05). 3. In comparison of occlusal surface discrepancy and marginal discrepancy according to 0.5mm-marginal-vent-space, groups with no 0.5mm-marginal-vent-space showed significantly less marginal discrepancy than groups with 0.5mm-marginal-vent-space (p<0.05). In summary these results suggest that individual tooth tray made of 3 types of materials with occlusal vent hole and individual tooth tray made of acrylic resin with no marginal vent space showed good accuracy of impression. In addition, individual tooth tray which is made of bite registration materials may be more useful because of advantage in facility and timesaving aspect of fabrication.

• 한국의류학회지
• /
• 제36권12호
• /
• pp.1297-1309
• /
• 2012

This study examined the effects of "me-model" body-size discrepancy on consumer's shopping mood, store satisfaction, and intention to revisit two types of online apparel stores (one featuring thin models and one featuring average-sized models). A convenience sample of women (n = 528) participated. Structural equation modeling was used to analyze the data. Participants who were thinner or similar to the models indicated positive shopping moods, a high level of online store satisfaction, and intended to revisit the stores when compared to participants who were larger than the models. Participants preferred the 'average-sized' model. This preference was attributed to the familiarity of the model and ability to effectively evaluate merchandise. The results revealed how models can influence apparel consumers in an online context.