• Journal of the Korean Society of Costume
• /
• v.54 no.8
• /
• pp.1-14
• /
• 2004

The aim of this study is to provide fundamental data on the development of ready-to-wear clothing appropriate for the lower body types of male students who play sports in college. The study was conducted by means of targeting 151 male sports majors between $18{\sim}27$ years of age. Characteristics of the respondents were ascertained by means of questionnaires and an evaluation of a total of 36 lower body features. The results of the study are as follows. 1. A comparison of anthropometric measurements with the National Anthropometric Survey of Korea (1997) revealed that the main characteristics of the lower somatotypes of male sports college students are large circumferences and developed muscles of the lower body. 2. Sports were classified into the following five categories : soccer, bodybuilding, wrestling, judo, and taekwondo. In particular, bodybuilding students demonstrated a somatotype with an increased circumference, depth, and width of the thigh and lower body. 3. Somatotypes were classified into 3 types by means of a cluster analysis employing S factors. Type 1 somatotype exhibits a large circumference in the lower body. Type 2 is a lower somatotype of a middle size. Finally, Type 3 encompasses a smaller group in weight and circumference with a developed calf and ankle. 4. Each group was evaluated using a discriminatory analysis as a check to see if the groups had been discriminated with accuracy. The total accuracy rate was 96.0%.

• International Journal of Costume and Fashion
• /
• v.3
• /
• pp.13-24
• /
• 2003

The purpose of this study was to examine the changes brought by the upper body form using a three-dimensional human body measurement the gypsum method. The developed plane figure was constructed using paper replica to analyze the dimensional shape of the upper torso and to be able to design clothes suitable for elderly women's physical characteristics. The characteristics are analyzed and compared with existing patterns in order to extract the components for the pattern design. The examination was carried out based on the developed plane figures of upper body surface replicas. Type 1, the bent-forward body form, has a wide gap on the shoulder. In Type 2, the gap of waist line was wide at angulus scapulae point. Type 3 was the thin body form, and the girth of the chest, front interscye breadth and back interscye breadth were more level with one another, compared to the other types. In Type 4, the bent-backward body form, there was a wide gap on front shoulder. Comparison with the developed plane figure and existed pattern, items revealed differences in significance included the front and back interscye width between the measured values of the existed patterns and the developed plane figure. Therefore, the basic components of basic bodice pattern for old women were determined in the up-bust circumference and length of the back.

• Korean Journal of Health Education and Promotion
• /
• v.12 no.2
• /
• pp.36-47
• /
• 1995

This research was obtained from analyzing how the physiques of the 3rd grade students of high school for males and females and developed for the last eleven years(from 1983 to 1993). By the physiques and nutritional index of physical growth and development, Relative Body Weight of 36.62 exceeded the standard, on the other hand females showed lower records than the standard. Relative Chest Girth Index belonged to the normal type of males and females in all, in the comparison of the records between 1983 and 1993, males increased in average 0.29 and females in average 0.55. Relative Chest Girth Index of females was greater than that of females. By the results of Relative Sitting Height Index, growth of the lower body for males and females was greater than that of males. In case of Vervaeck Index, males increased in average 2.04 but females increased in average 1, 20 relatively less than males. These phenomena provided for the evidence of the deficient nutrition in females. In the regression models of body height and body weight within a certain period, statistical regression model types which best indicated chronological average changes of body height and body weight, took 3rd Order Polynomial Regression Model rather than linear regression model. In females, statistical regression model types which best is suitable for chronological average change of body height and body weight, took 4th and 2nd Order Polynomial Regression Model respectively. The prediction value of 1995 by estimated polynomial regression model anticipated that body height of 3rd grade year students of high school of males in 1993 went on increasing from 170.87cm to 171.79cm in average 0.92cm growth and that of females from 158.99cm to 160.79cm in average 1.80cm growth. In addition, body weight of males seemed to increase from 62.58kg to 64.52kg in average 1.94kg growth and that of females seemed to increase from 54.05kg to 54.19kg in average 0.14kg growth. Linear Regression Model was suitable for the regression model of body weight for body height. Prediction on increase of an average body weight for body height was that, according to growth of body height 1cm in males, body weight increased 1.41kg averagely and that of females 0.86kg. For that reason, we came to conclusion that body weight increase for body height 1cm in males was greater than that in females on average.

• Journal of the Korean Dietetic Association
• /
• v.17 no.2
• /
• pp.99-117
• /
• 2011

The purpose of this study was to investigate weight gain during pregnancy based on pre-pregnant Body Mass Index, to compare eating habits based on the recommended standards for weight gain presented by the Institute of Medicine, and to identify factors affecting the weight gain of pregnant women. The subjects were grouped into three categories according to the recommended weight gain standards presented by the Institute of Medicine: the inadequate group, the adequate group and the excessive group. The excessive group had a significantly higher pre-pregnant Body Mass Index than that of the two other groups. Based on a comparison of the eating habits and nutrient intake of the women to the recommended standards for weight gain, the excessive gain group had large meals and ate more frequently outside of the home when compared to the pre-pregnancy period. Based on an analysis of correlations between weight gain during pregnancy and diet factors, the adequate gain group had positive correlation between weight gain and a "balanced meal" and had negative correlation with "convenience meals". The excessive gain group had a positive correlation with "convenience meals" and had a negative correlation with "meal skipping." All the pregnant women were more frequent in the "overeating categories" and all ate more "fruit," as their weight gain was higher. In particular, the excessive gain group was frequently evaluated as "overeating". These results indicate that the factors affecting weight gain during pregnancy were the Body Mass Index before pregnancy, eating types, and eating habits. As the Body Mass Index before pregnancy was higher, the ingestion of a 'balanced meal' was less, and overeating and gluttony were more frequent. Therefore weight gain was enhanced.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.10
• /
• pp.1351-1356
• /
• 2012

The objective of this study was to compare body weight, ADG, and feed:gain ratio of antibiotic-free pigs from Yorkshire dams and sired by Yorkshire (YY), Berkshire (BY), Large Black (LBY) or Tamworth (TY) boars. All the crossbred pigs in each of three trials were raised as one group from weaning to finishing in the same deep-bedded hoop, providing a comfortable environment for the animals which allowed rooting and other natural behaviors. Birth, weaning and litter weights were measured and recorded. From approximately 50 kg to market weight (125 kg), feed intake and body weights were recorded manually (body weight) or using a FIRE (Feed Intake Recording Equipment, Osborne Industries Inc. Osborne, Kansas) system with eight individual feeding stations. Feed intake data for 106 finishing pigs between 140 and 210 d of age and the resulting weights and feed conversion ratios were analyzed by breed type. Least square means for body weights (birth, weaning and to 240 d) were estimated with Proc Mixed in SAS 9.2 for fixed effects such as crossbreed and days of age within the sire breed. The differences within fixed effects were compared using least significant differences with DIFF option. Individual birth weights and weaning weights were influenced by sire breed (p<0.05). For birth weight, BY pigs were the lightest, TY and YY pigs were the heaviest but similar to each other and LBY pigs were intermediate. For weaning weights, BY and LBY pigs were heavier than TY and YY pigs. However, litter birth and weaning weights were not influenced by sire breed, and average daily gain was also not significantly different among breed types. Tamworth sired pigs had lower overall body weight gain, and feed conversion was lower in TY and YY groups than BY and LBY groups (p<0.05), however, number of observations was somewhat limited for feed conversion and for Tamworth pigs. Overall, no convincing differences among breed types were noted for this study, but growth performance in the outdoor environment was satisfactory.

• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.112-128
• /
• 2003

Since areas of pain and dysfunction of musculoskeletal typically suffered by the patients with back disorders spread all over the body, WBIP(GCM Program) for the primary treatment and management is required. The purpose of this study is to analyze if WBIP(GCM Program) based on the hyper/hypomobility pattern of Four Body Types can identify the effective treatment of back disorders and the effect on the postural balanced restoration of the spine and extremities. Non-specific back disorder is still a major reason for sick leave. And moreover, its been reported that there was often recurrence to the patients whose symptom had been diminished. As a WBIP(GCM Program) based on kinematic chain patterns of Four Body Types, this study gave a new information on the effective diagnosis, treatment and management of non-specific back disorders. 337 patients above the twenty-five years old with the non-specific back disorders at the hospital and oriental medical clinics at Kyungnam and Busan areas in South Korea from August 24th, 2000 to Feb 23rd, 2001 have randomly been assigned to four experimental groups such as Whole Body Intervention Program Group, Physical Therapy Group like modality treatments, Acupuncture-Treatment Group, and Placebo Control Group. According to intervention program applied to the each four group for three times per week(twelve times per 4weeks), as the time-series methods, we compared and evaluated the body status of the pretest with that of post treatment completion of four week, three month, and six month, respectively. As the analytical method of measurement, our researchers used the Moire Interferometry Unit and Postural Kit that could measure the postural balance of spine and extremities. The collection of data was performed in the designated hospital and oriental medical clinics. For the analysis of the data, the SPSS 10.0 package program was used. X2-test has been taken in order to compare and analyze characteristics and GPES of the patients in four experimental groups. Repeated Measure ANOVA and Tukey post hoc test has been adopted in order to compare the effects of the balanced restoration of the spine and extremities among four Groups categorized for this study. Statistical significance was accepted at the 0.05 level of confidence The effect of the balanced restoration on the spine and extremities of the patients with non-specific back disorders has been proved in all of the Groups. As for the restoration degree, however, WBIP(GCM Program) Group produced the highest effectiveness in terms of the fact that it had a dense moire in comparison with the other three Groups and that the Moires of both sides had the same level by the time(p<0.01). WBIP(GCM Program) based on four tilting types of scapular and ilium and hyper/hypomobility pattern took a higher effect on the balanced restoration of the spine and extremities through a whole body as well as the treatment of back disorders than the other three Groups which the usual remedy without classification of body type had been applied to.

• The International Journal of Costume Culture
• /
• v.3 no.1
• /
• pp.1-11
• /
• 2000

The purpose of this study is to compare the constitutions comparatively among Korean, Chinese and Chosunjok college women and thereby, provide for some basic data helpful to the development of export apparels befitting the Chinese consumers, For this purpose, Korean, Chinese and Chosunjok college women aged between 17 and 24 were sampled to be subject to body measurements. The measurement data obtained were indexed for each part of the body to set a total 29 constitutional indices, which were analyzed by factor dictating the major shapes of body, Thus, based on the constructed, the differences of constitution among three groups were comparatively analyzed. The results of this study of this study can be summarized as follows; It was found through this study that Korean college women had thickest neck compared with body size and had longer lower limbs compared with stature, Moreover, their lower body was absolutely longer than the other two groups, and thus, Korean college women were found slimmest. On the other hand, Chinese college women had most voluminous chest turned over with shorter and thicker body. they were obesest. Chosunjok college women had longest upper body but shortest breast length. Their lower body was obesest, and their body was longer compared with stature. Moreover, Chosunjok college women's lower limbs were shortest, while their arm scyes were small nearest body type.

• Imaging Science in Dentistry
• /
• v.50 no.4
• /
• pp.319-322
• /
• 2020

Purpose: The purpose of this study was to investigate the utility of the width-to-length ratio for the differentiation of ameloblastomas and odontogenic keratocysts in the body of the mandible. Materials and Methods: This study retrospectively reviewed 9 patients with ameloblastomas and 9 patients with odontogenic keratocysts using cone-beam computed tomography. The width-to-length ratio was determined by measuring the ratio between the greatest buccolingual dimension and the greatest perpendicular anteroposterior dimension of the lesion on the axial view. One-way analysis of variance was used to examine the difference in the width-to-length ratio between the 2 types of lesions. Statistical significance was tested at P<0.05. Results: Ameloblastomas showed a mean width-to-length ratio of 0.64, whereas odontogenic keratocysts showed a mean width-to-length ratio of 0.41. The cut-off value with which the 2 types of lesions were differentiated was 0.5. The width-to-length ratios of ameloblastomas were significantly higher than those of odontogenic keratocysts (P<0.05). Conclusion: The width-to-length ratio might be used to differentiate between ameloblastomas and odontogenic keratocysts.

• Journal of Fashion Business
• /
• v.17 no.2
• /
• pp.33-45
• /
• 2013

A study using 3D virtual garment simulation is carried out for the evaluation and application on the pants fit for obese women in their age of 20s and 30s. The results are as follows; 5 obese women in their 20s and 30s were selected for the testing 3D body. They showed no significant differences in all items, comparing with the data of 5th Size Korea body dimensions. The average waist circumstance of the subjects' 3D body dimensions was 87.0cm, hip circumstance was 102.4cm, BMI was $27.1kg/m^2$, and their obese body types had similar mean values. Based on the detailed design of ready made pants and the study results of 20~30s obese women preference for pants design, pants of straight silhouette and semi-tight fit which have waist line lowered, no front dart and one back dart, were manufactured with 100% black cotton and cotton spandex mixed fabrics. When comparing the appearances between real garment and virtual garment, the average of the real garment with 100% cotton was 3.70 and the virtual garment was 4.05. The average of real garment with cotton spandex mixed fabrics was 3.75 and the virtual garment was 4.06. Therefore, the average of virtual garment was highly evaluated. When comparing the results of evaluating the appearance, there was no significant difference caused by materials between real garment and virtual garment. The expression for the ease of virtual garment and real garment was also similar for good evaluation. Thus, 3D virtual garment simulation did positively prove its reliability and effect.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.470-480
• /
• 2015

There are many challenges in manufacturing system for new factory construction. Although factories produce same product, the layout of each factory may be different. The body shop in an automotive factory is a typical flow line with assembly, but the layout concept of the line varies among factories. In this paper, two types of layouts in the body shops of automotive factories, one for layered build and the other for modular build, are compared using simulation study. The simulation experiments indicate that the modular build layout is better than the layered build layout with respect to production rate. The effects of various failure distributions on the throughputs are also investigated, and some insights are suggested regarding the layout concept.