• Korean Journal of Ichthyology
• /
• v.24 no.3
• /
• pp.167-176
• /
• 2012

In comparison of the body color of Zacco platypys from Korea, it was found that there were significant differences among geographical populations in the color of upper eye, snout tip and anterior margin of pectoral fin. In individuals with red upper eye the snout tip was red but in those with black upper eye red color did not appeared on the snout tip. There was no difference between male and female in this characteristic and it was expressed uniformly within the same population. So we divided Z. platypus into two types by the color of upper eye; R type with red upper eye and B type with black upper eye. Red band on anterior margin of pectoral fins appeared in all males of both R and B type populations but in females it appeared only in B type individuals. The two types shown different distribution pattern in Korean Peninsula. R type distributed in almost whole area but B type distributed only in southeastern part of the peninsula: Nakdong, Hyeongsan, Taehwa, Suyeong and Jinjeon River. In analysis of external morphology among two types of Z. platypus from Korea and Z. platypus from Japan, there were no significant differences. But they were relatively well separated in discriminant function analysis.

• Journal of Korean Clinical Health Science
• /
• v.3 no.2
• /
• pp.340-353
• /
• 2015

Purpose. This study of purpose was to to compare of Aerobic and Anaerobic Capacity between Sasang Constitutions and ACE Gene Polymorphism. Methods. 24 healthy males were participated in this experiment who were in their twenties and had no disease, then they were divided by ACE type and by Sasang constitutions with QSCC II. According to these group, the body compositon, Aerobic capacity including VO2max, Anaerobic Capacity were measured. Results. In this study, According to ACE type, ID type were 8, II were 8 and DD type were 8 persons. According to ACE type, there were significant difference among type, especially, II, ID type more than DD. II type is more higher than any type and DD type is lower in the ratio of Blood Lactic recovery. DD type was more excellent than other type in Anaerobic power. According to Sasang Constitutions, there were 8 SoYang, 5 Taeum, 11 Soeum and then no TaeYang constitution. In Aerobic capacity, Taeum constitution had significantly high means and Anaerobic threshold. In the ratio of Blood lactic recovery, Taeum constitution was excellent and SoYang had poor recovery capacity. SoYang had more excellent than other constitution significantly in Anaerobic capacity. Comparing ACE type with Sasang constitution, Soyang constitution included 4 ID types, Taeum inclued 2 II types and 2 ID types then Soeum included 6 DD types. Compared of Aerobic and Anaerobic capacity between Sasang constitutions and ACE type, Soyang constitutions were similar to ID type, Taeum similar to II type and ID type and then Soeum were DD type. Conclusions. This study had made it clear that there were similar feature between ACE type and Sasang constitutions. Also it's possible to predict the Aerobic capacity that may be foreseen by ACE type with Sasang questionnaire method but not Anaerobic capacity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.353-359
• /
• 2010

Cementitious matrix based composites are vulnerable to the drying shrinkage crack during the curing process. In this study, the drying shrinkage induced fracture behavior of the fiber reinforced concrete is simulated and the effects of the fiber reinforcement conditions on the fracture characteristics are analysed. The numerical model is composed of conduit elements and rigid-body-spring elements on the identical irregular lattice topology, where the drying shrinkage is presented by the coupling of nonmechanical-mechanical behaviors handled by those respective element types. Semi-discrete fiber elements are applied within the rigid-body-spring network to model the fiber reinforcement. The shrinkage parameters are calibrated through the KS F 2424 free drying shrinkage test simulation and comparison of the time-shrinkage strain curves. Next, the KS F 2595 restrained drying shrinkage test is simulated for various fiber volume fractions and the numerical model is verified by comparison of the crack initiating time with the previous experimental results. In addition, the drying shrinkage cracking phenomenon is analysed with change in the length and the surface shape of the fibers, the measurement of the maximum crack width in the numerical experiment indicates the judgement of the crack controlling effect.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.1-7
• /
• 2006

The Primary type of swinging motion in human movement is that which is characteristic of a pendulum. The two types of pendulums are identified as simple and compound. A simple pendulum consist of a small body suspended by a relatively long cord. Its total mass is contained within the bob. The cord is not considered to have mass. A compound pendulum, on the other hand, is any pendulum such as the human body swinging by hands from a horizontal bar. Therefore a compound pendulum depicts important motions that are harmonic, periodic, and oscillatory. In this paper one discusses and compares two algorithms of Newton's method(F = m a) and Euler's method (M = $I{\times}{\alpha}$) in compound pendulum. Through exercise model such as human body with weight(m = 50 kg), body length(L = 1.5m), and center of gravity ($L_c$ = 0.4119L) from proximal end swinging by hands from a horizontal bar, one finds kinematic variables(angle displacement / velocity / acceleration), and simulates kinematic variables by changing body lengths and body mass. BSP by Clauser et al.(1969) & Chandler et al.(1975) is used to find moment of inertia of the compound pendulum. The radius of gyration about center of gravity (CoG) is $k_c\;=\;K_c{\times}L$ (단, k= radius of gyration, K= radius of gyration /segment length), and then moment of inertia about center of gravity(CoG) becomes $I_c\;=\;m\;k_c^2$. Finally, moment of inertia about Z-axis by parallel theorem becomes $I_o\;=\;I_c\;+\;m\;k^2$. The two-order ordinary differential equations of models are solved by ND function of numeric analysis method in Mathematica5.1. The results are as follows; First, The complexity of Newton's method is much more complex than that of Euler's method Second, one could be find kinematic variables according to changing body lengths(L = 1.3 / 1.7 m) and periods are increased by body length increment(L = 1.3 / 1.5 / 1.7 m). Third, one could be find that periods are not changing by means of changing mass(m = 50 / 55 / 60 kg). Conclusively, one is intended to meditate the possibility of applying a compound pendulum to sports(balling, golf, gymnastics and so on) necessary swinging motions. Further improvements to the study could be to apply Euler's method to real motions and one would be able to develop the simulator.

• Journal of Korean Clinical Nursing Research
• /
• v.22 no.1
• /
• pp.20-27
• /
• 2016

Purpose: The purpose of this study was to compare the fluid intake and output (I&O) measurement methods in order to figure out more effective and easier method for medical patients Methods: 71 hospitalized patients participated in the study. In "liquid only (LO)" method, all amount of water was summed up including any liquid types of food and IV fluids. In "whole food(WF) intake," all liquid and solid food intake and IV fluids were added up. Results: The average amount of fluid intake was 2105.29 ml for LO method and 2523.54 ml for WF method. The average amount of fluid output was 2148.98 ml. The intra-class correlations (ICC) between the intake and output measures by the two different methods was 0.803 and 0.826, respectively. The correlation between the differences of intake/output and body weight change in two different methods was r=.347 (p=.003), and r=.376 (p=.001), respectively. Conclusion: The results of this study indicate that both LO and WF method may be useful in monitoring patients' fluid balance. Given the comparability of using LO over WF, it is suggested that measuring just liquid only intake as the indicator of patient's intake is applicable in clinical setting.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.250-255
• /
• 2023

This study applies various surface patterns to minimize material loss in construction equipment that is subject to severe wear due to sand, such as the wear-resistant steel plates of dump trucks or the teeth of excavators. The relationship between surface morphology and wear behavior is investigated using PLA+ polymer to observe the effect of the surface pattern. Five types of samples - smooth, concave, convex, wavy concave, and wavy convex designs - are created using a 3D printer. A wear experiment is conducted for a duration of 3 h using 6.5 kg of abrasive particles. The mass loss of the samples after the experiment is measured to assess the extent of wear. Additionally, the surface morphology of the samples before and after the experiment is analyzed using SEM and confocal microscopy. The study results reveal that the smooth design exhibits the highest wear loss, whereas the concave and wavy concave designs show relatively lower wear loss. The convex and wavy convex designs exhibit varying contact areas with the abrasive particles depending on the surface pattern, resulting in different levels of wear. Furthermore, a comparison between the experimental results and DEM simulations confirms the observed wear trends. This study reveals the relationship between wear damage according to surface pattern shape and is expected to be of substantial help in the analysis of wear and tear on agricultural and heavy equipment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.860-874
• /
• 2012

This study provides size information on current imported medical compression stockings in Korea. A total 20 brands from 6 countries imported and sold in the Korean on-off line markets were selected for this study and the sizing system of medical compression stockings was researched. The results of this study were as follows: there were size differences among different USA brands according to product type or compression class of medical compression stockings. To establish the sizing system for medical stockings of the German brands, the basic body measurements standard was set as cA, cY, cB, cB, cC, cD, cE, cF, cG, cH, cT, lD, lG, and lT. Italian brands developed the sizing system for medical compression stockings by compression class. In the Swiss brands, size types were sub-divided as 'Normal', 'Plus', 'Short', and 'Long'. The sizing 1 were confined within very narrow limits. There were differences of the basic body measurements between Taiwan brands. The results of the comparison of the size range of the imported brands with Size Korea (KATS, 2010) by two-way size distribution shows that the sizing systems of the imported brands were unsuitable for Koreans. To enhance the suitability of the sizing system for medical compression stockings, a new sizing system for Korean adult males and females needs to be established.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.12 no.1
• /
• pp.29-37
• /
• 2018

In this research, one's ability to perform activities of daily living, body pain, and emotional states of elders who live alone and elders who live with others were compared to investigate which factors affect senior's health state. The data was collected from 88 seniors and analyzed for the comparison. Compared to seniors who live with others, elders who live alone had lower activity of daily livings, stronger body pain, and instability in emotional states. These 3 aspects showed a statistical significance of correlation. As a result of further analysis, not only residential types(living alone or living with others), but also life pattern(indoor or outdoor) is affected on the results. It is expected that the results of this research could be used as basic data for physiological index to evaluate senior's health state and care service for seniors who live alone.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.9
• /
• pp.940-951
• /
• 2012

This study evaluates the fit preference of the tailored jacket according to body types for 20's adult women through a comparison of real and virtual fit. A five point fit evaluation scale utilizing a wearer acceptability scale by Shen and Huck was used to evaluate the degree of the preference of real and virtual fit. This scale contained 23 items in three categories: front fit, back fit, and side fit. For each item, 5 responses from 'too tight' fit (1 point) to 'too loose' fit (5 point) were possible. The middle position for each fit criterion indicated a 'good' fit (3 point). The data were analyzed with a t-test using statistical program SPSS 17.0. According to the results, there were no significant differences ($p{\leq}.05$) between the real and virtual fit preference in total measurement items such as front collar, lapel and roll line, front shoulder slope, front armhole, front waist, abdomen, sideseam, hemline, front silhouette, side shoulder, side armhole, side sleeve width, side hip, side silhouette, back collar stand, upper back, back armhole, back waist, back hip, back silhouette except front bust, side waist, and back center back. The factor that caused a difference in the fit preference between the real and virtual fit evaluation was a specific body type such as Body Type A that indicated a small bust circumference and a big hip circumference.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.65-72
• /
• 2009

For the breeding purpose, in this study we attempted to select a new Lentinula edodes strain by comparing mycelial growth rate, fruit-body quality and mushroom productivity per substrate weight of hybrid strains with parent strains. Nineteen hybrid strains were made by cross of di-karyotic and mono-karyotic to develop strains suitable for sawdust cultivation of L. edodes. Among the nineteen strains, ten were selected by comparing mycelial growth rate on PDA media and wood rot on sawdust-based substrates. The most mushroom harvesting was achieved by 100 days incubation from KFRI 960, KFRI 961, KFRI 962, KFRI 963, KFRI 964, KFRI 971, KFRI 973 and 125 days from KFRI 968, 970. Experiment of incubation periods with the ten strains showed that there were productivity differences between 100 and 150 days incubations. Through comparison of hybrid strains' mushroom productivity it was found that there was no difference in mushroom productivity through crossing high temperature types with high temperature types, crossing low temperature types with high temperature types and crossing unknown temperature types with high temperature types, but there was difference through crossing middle temperature types with high temperature types. Hybrid strains showed better productivity compared with parent strains. Fruiting temperature type analysis of hybrid strains confirmed that strains of high temperature types have a dominant character.