• 한국의류학회지
• /
• 제20권2호
• /
• pp.257-269
• /
• 1996

The puropose of this study was to investigate the movement-fitness according to the surface changing of lower limb The experimental items were divided into the lower limb movements (5) and body-shapes (7). This study was done by the expansion and contraction rate consideration of length, girth Also, the lower half of body shape-change on the movements and body-shapes by flat shell was done simultaneously. The summarized findings resulted from experiments and investigation are suggested as follows; First, when commpared the expansion and contraction rate of the length and girth items, the expansion rate of the back crotch length (14~20%), hip girth (10~ 21%) and knee girth (6.2~18.5%) in rabbit leap movement was the most notable among all variables considered in this experimentation. On the others hand, the front croth length (-22~-52%) contracted remarkably. And big-thigh type was the most notable on the body-shape comparision. Second, in comparision of the expansion and contraction rate of the area on the blocks, the expansion of the hip (50~200%) and knee (51~74%) block was the most remarkable. Especially, in the sit on knees movement of the hip-down type expanded 209.4%. Third, in comparision of the lower half of body shape-change, on the movements and body- shapes by the flat shell, under the influence of knee-joint and hip-joint the shape-changs of the hip and knee block was the most notable. But the shape-change of the waist, abdomen, calf, and ankle was feeble.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권10호
• /
• pp.484-490
• /
• 2003

This paper describes with the stator analysis and design of a ring type ultrasonic motor. The design for piezoelectric ceramic and elastic body of stator were calculated by using the finite element method (FEM) that consider the resonance frequency, vibration mode and coupling efficiency. Namely, such results were acquired the calculation result of the piezoelectric ceramic thickness 0.5[mm], elastic body thickness 2.0[mm], resonance frequency 51.8[kHz], vibration mode 7 order and coupling efficient 12.5[%], the outer and inner diameter of vibrator 50[mm], 38[m]. On the basis of such result, the ring type ultrasonic motor was manufactured. Also for driving characteristics of ring type ultrasonic motor, 2-phase inverter was constructed. Then the propriety of this paper was established from comparision of the simulation and an experiment results of the ring type ultrasonic motor.

• 한국생활과학회지
• /
• 제13권1호
• /
• pp.135-144
• /
• 2004

The purpose of this study was to investigate the wearing sensation and satisfaction of high school girls winter uniform' jacket. The subject participated in the study were 599 high school girls attending four different schools. The fabrics were divided into two parts of stretch and non-stretch woven fabrics. The results were as follows: 1. The high school girls showed body image distortion that she recognized herself as fatter than her real body type. Especially, this was severe in the slim body type. 2. In the aspect of the satisfaction for uniforms' jacket made with stretch fabric and non-stretch woven fabric. the elastic fabric was more satisfied than the non-stretch one because its width and length was shorter and fitter than non-stretch one. 3. When they wore the school uniform jacket, the wearing sensation of one made with stretch and non-stretch woven fabrics showed significant differences in arms hole when raising hands, front bust when carrying backpack on their back, backs while studying at desks, the upper arms and the elbows. 4. As for the alteration of school uniform jacket, the non-stretch woven fabric was appeared to be altered more than the stretch one.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.391-401
• /
• 1999

For proper communication among manufactures in various countries and for consumers' convenience in purchasing garments imported from foreign countries the ISO revised the size designation system in 1969. Since 1970's various countries have revised their standard sizing system by adapting the ISO system . The purpose of this study is (1) to satisfy domestic consumer's needs by developing a sizing system based on that of ISO for Korean women in their early twenties and (2) to contribute to entering the international fashion market by manufacturing high quality apparel products The results were as follows: (1) By measuring and analyzing of 464 female between the ages for 18 and 24 the data indicated that body height could be divided into following three groups. S(Short) : 152cm (19.2%) R(Regular) : 160cm (57.8%) L(Long) : 165cm(22.6%) (2) According to the results to analyzing body type of this study the medium hip(drop 6) is 47.4% the large hip(over drop 12) is 42.7% the 2 types covers 90.3% (3) Comparing Korean women's size with foreign women's size DOB size code is 17 JIS size code is 9AR, FNOR size codes are 36n. 38n. and Italian size cods are 40, 42

• 한방비만학회지
• /
• 제5권1호
• /
• pp.21-29
• /
• 2005

Objectives : This study was carried out to evaluate the difference of body mass index(BMI) distribution and the difference of effect of weight reduction program among Sasang constitution. Methods : Sasang constitution was differentiated by QSCC II of 875 cases. Body composition was analysed by bioelectrical impedance analysis(Inbody 3.0, Biospace, Seoul, Korea) in before and after treatment to evaluate the effect among Sasang constitution. The weight reduction program including very low calorie diet, electrical acupuncture and herbal medicine was treated to all cases equally during 1 month. Results and Conclusions : The group of Taeum was more obese and less reducted in body fat mass and % body fat in tools of percent rates of the changes than other type of Sasang constitution. In conclusion, the group of Taeum is more easy to become obese and more difficult to treat obesity

• Journal of Periodontal and Implant Science
• /
• 제29권4호
• /
• pp.929-942
• /
• 1999

Three beagle dogs aged over one and half years were used in this study. All mandibular premolars were carefully extracted. Two AVANA implants(Sumin, Korea) and two 3i implants(Implant Innovation, USA) were installed at each right and left side respectively. Each dog was sacrificed at 4, 8. 12 weeks. Non-decalcified specimens were made and stained for a light microscopic study. The results were as follows ; 1. Inflammation was not observed in the area of bone tissue adjacent to the implant body. 2. With time, quantity of osseointe-gration increased in each type of den-dental implant. There was no difference between AVANA implant and 3i implant. 3. Maturation of the bone around each type of the dental implant increased with time. 12 weeks after implant installation, the bone around dental implant represented compact bone-like appreance. 4. In case implants were located adjacent to a root, newly-formed periodontal ligament tissue was observed around the implant. And the direction of the periodontal ligament fiber was parallel to the surface of the implant . Within the results of this study, AVANA implants represented similar osseointegra-tion in comparision with 3i implants.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.554-561
• /
• 1998

Vehicle body structures are formed by thousands of spot welds and fatigue failure of vehicle structures occur near the spot welds after driving a long way at a durability test road. It is necessary to know accurately the reason of the fatigue failure of the spot weld in the developing stage in order to reinforce it. Many investigations have been done regarding the strength of spot welded joints, contributing to understand its fatigue strength. In developing process, a fatigue failed spot welded area can be repaired by $CO_2$ welding or another method to continue the test. To know the effect of reinforcing these welds, several methods of welding were analyzed and compared to spot welding. With the results of this test, the appropriate repair method can be used instead of spot welding during the development of new car and best design guide can be given for the strength. In this study, fatigue and static tensile tests are made and microstructure is investigated for the purpose of estimating the strength of welded joints by using spot welded and $CO_2$ plug welded specimens. The tested specimens are of two types : Tensile-shear type(TS) and L-tension type(LT).

• 패션비즈니스
• /
• 제13권2호
• /
• pp.17-29
• /
• 2009

Due to rapid economic growth and accelerated urbanization, numerous cities in China have been turning into huge consumption markets almost simultaneously, and thus, the Chinese apparel markets being globalized are most vigorous in the world, attracting attention from the world apparel industries. If the Korean apparel businesses should develop the products befitting the conditions of the Chinese apparel markets and reflecting her consumers' fashion trends and needs, their apparels would be satisfactory enough to Chinese consumers, being competitive in the Chinese markets. In this sense, today's Chinese apparel markets may well provide the Korean apparel businesses with both crisis and opportunity. As one of the methods to enhance Chinese consumers' satisfaction with the Korean apparels, the Korean apparel businesses should consider seriously about the apparel fitting or a factor determining apparel silhouettes and sense of wearing. Since Chinese consumers differ widely in terms of body types and measurements depending on regions due to the vast territory, differentiation of the apparel fitting is more important than any other single factor, and thus, correct information about apparel fitting may well be directly related with manufacturing of excellent apparels. The purpose of this study is to comparatively analyze the upper body measurements and types of the Chinese and Korean women in their 20's to provide the Korean apparel business engaged in Chinese markets with some basic data about apparel fitting conducive to their development of effective apparel commodities. For this purpose, Chinese women in their 20's living in China's two major cities leading China's women's apparel markets were sampled.

• 폴리머
• /
• 제25권1호
• /
• pp.142-150
• /
• 2001

그 동안 고무산업 현장에서는 유기용제계 고무 접착제를 사용하여 왔으며 이로인해 품질의 불균일성과 화재위험성 및 인체유해성이 상존하여 왔다. 이를 해결하기 위해 비휘발성, 고인화점인 탄화수소계 원료를 사용하여 새로운 용액을 개발하였으며 이 용액은 인체에 대한 유해성이 매우 적으며 증발이 되지 않으므로 화재위험 및 환경적인 문제를 해결할 수 있었다. 새로운 용액은 기존 제품에 사용되어 온 고무계 binder대신 고무면으로 비휘발성 용제가 침투, 팽윤 현상을 일으켜 고무면 끼리 접착을 유도하는 새로운 개념의 제품이며 접착력 유지 시간이 기존 제품에 비해 현저히 개선되었다. 또한 내구력 면에서도 기존품과 비교할 때 유사한 양상을 보이므로 팽윤 현상으로 인한 물성저하가 나타나지 않았으며 각종 첨가제와도 반응성이 없는 안정한 제품이었다. 기존품의 경우 가교 후 절단면에서 가스로 인한 균열이 발생한 반면 새로운 제품의 경우는 이러한 현상이 발생하지 않았다.

• 한국가금학회지
• /
• 제6권1호
• /
• pp.12-23
• /
• 1979

가장 효율적이고 경제적인 Broiler 사료의 영양소균형을 구명하기 위하여 1978년 6월 16일부터 1978년 8월 11일까지 대한양계협회 능력검정사업소에서 실시된 시험의 결과는 다음과 같다. 1. 생존율에서 품종간에는 모두 비슷한 성적이었고, 영양수준별로는 고영양수준에서 95.7%로서 제일 낮았으나 총계적으로 유의적인 차이는 인정되지 않았다. 2. 8주시 체중에서 가장 무거웠던 B품종은 D품종과 유의적인 차이로 우수하였고 영양수준별로는 중영양처리가 전체적으로 제일 우수하였으며 A, B품종은 중영양 수준에서 다른 품종과 유의적이고 우수하였으며 A품종은 저저영양수준에서 체중감소가 가장 심하였다. 3. 사료효율은 체중이 무거웠던 B품종이 제일 우수하였으나 품종간에는 유의차가 없었다. 사료의 영양수준간 사료효율은 고도의 유의성이 인정되어 고ㆍ중영양 수준은 저ㆍ저영양수준과는 유의차를 보였으며 산육능력에 미치는 효과가 컸다. 4. 계종과 영양수준간의 상호작용 효과에 있어서는 영양수준이 높은 조건하에서는 품종의 특성이 발휘되어 계종간 및 능력의 차가 인정되나 저영양수준하에서는 계종간의 증체와 사료효율에 있어서 능력차를 인정하기 곤란하였다. 5. 산육지수에 있어서는 품종간의 유의차가 인정되며 8주시 체중과 사료효율이 우수하였던 B품종이 가장 높았고, C, D 계종과는 유의차가 있었다. 사료의 영양수준간 지수간에도 크게 유의차가 있었으며 중ㆍ고영양수준구는 저영양수준에 비하여 산육능력을 크게 향상시킴으로서 브로이라 사양에 있어서는 적어도 중열량(M.E. 3,000kcal/kg) 이상의 사료급여가 바람직하다. 6. 도체율에서는 품종간에 유의성이 인정되었는데 8주령시 체중과 같은 분표로 B 품종이 D 품종과 유의적인 차이를 보였으며 영양수준간에는 거의 동일한 성적을 보였다. 7. 경제성 분석 결과는 중영양수준의 처리가 모든 품종에서 가장 효율적이고 경제적인 처리구로 나타났다.m$0.22 percent였으며, W.L.H.는 33.25$\pm$0.36 0.36이었다. (중략)로 질병감염을 막는데 항생제의 사용효과가 점차 감소하고 있기 때문에 이러한 항생제를 대체할 수 있는 방안으로 계란항체를 이용할 수 있다.한 중공 플랜지 형상의 단조 방법 중 보다 적절한 단조방법인 압조 단조에 있어서 일반적으로 사용되고 있는 SM10C에 대한 유한요소 해석을 수행하였으며, 제품의 형상비에 따라 폴딩 결함의 발생 유무를 검토하고, 폴딩 결함 없이 단조하기 위한 중공 플랜지의 형상한계 비를 제시하였다.도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에