• 한국전자거래학회지
• /
• 제4권3호
• /
• pp.213-234
• /
• 1999

Currently, various international standard organizations, academic institutes, and private organizations are making efforts to improve and expand the traditional EDI. The next generation EDI has potential to impact on the existing and planned EDI systems. Major objective of this study is to systematically analyze and compare various next generation EDI technologies. In order to accomplish the research objective, this paper presented the following three issues. First, overall development trend and types of the next generation EDI were analyzed. Secondly, basic concepts of a few important next generation EDI technologies were presented. Lastly, models to be used to analyze the various next generation EDI technologies were proposed and results of the analyses peformed based on the proposed models were presented.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.176-181
• /
• 1999

The objective of this study is to compare and analyze the industrial injury-values of all the industries through yearly accident rate and frequency rate based on the governmental documentation of industrial injuries. The samples for this study are chosen from the companies with less than 200 employees under charge of the Kangnung Ministry of Labor during the period of 1995-97. Safe-T-Score is used for statistic control on the qualitative comparison of the present and the past industrial injury-rates. In the comparison of the past and the present industrial injury-rate by means of Safe-T-Score, this study shows that there does not exist any remarkable improvement, whereas the document of the Ministry of labor reports that the rate is decreasing greatly. Therefore, this study proposes some solutions to reduce industrial disasters and points out the necessity of more practical and effective methods to analyze the industrial disaster.

• 한국농공학회지
• /
• 제41권2호
• /
• pp.92-103
• /
• 1999

A series of field tests were performed to suggest a rational method for the stability evaluation of soft clay. The behavior of settlement-displacement obtained by field monitoring system was used to compare and analyze with various stability evaluation methods, and to investigate the applicability of the methods for stability evaluation of soft clay. The limit equilibrium method, numerical analysis and field monitoring methods were used to analyze the stability evaluation. The horizontal displacement was abruptly increased when physicla properties of soft clay reached its maximum values and therefore, the values of these properties could be used to the fundamental data for stability evaluation. The evaluation of the stability of clay embankment was suggested to use inclination of ccrve rather than critical line, and the minimum satey factor of 1.2 or larger for natural clay was recommeded . Therefore, the evaluation of short term stability of soft clay could be effectively peformed with the hypefrbolic model and the field monitored data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.109-114
• /
• 2010

Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.83-87
• /
• 2020

In this letter, we propose and analyze a new asymmetric structure that can be used for next-generation power semiconductor devices. We compare and analyze the electrical characteristics of the proposed device with respect to those of symmetric devices. The proposed device has a p-emitter on the right side of the cell. The peak electric field is reduced by the shielding effect caused by the p-emitter structure. Consequently, the breakdown voltage is increased. The proposed asymmetric structure has an approximately 100% higher Baliga's figure of merit (~94.22 MW/㎠) than the symmetric structure (~46.93 MW/㎠), and the breakdown voltage of the device increases by approximately 70%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.337-338
• /
• 2012

As a rahmen structure, the connection among columns of Green frame is divided into three types such as sleeve, coupler (column pre and post installation), and bolt. The bolt type consists of six types according to steel frame shape and each type has different constructability, safety, structural performance, cost, and quality. Therefore, the analysis of comparison among the types is necessary. The objective of this study is to analyze the characteristics according to the shape of six bolt types to select the appropriate connection of Green frame. The results of this study can be used as a basic study for indentifying the characteristics of steel frame on site applying bolt type connection of Green frame. In addition, this study can be applicable to compare and analyze the performance and constructability of six bolt types in detail.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.74-79
• /
• 2021

In this paper, the 3D shape of a hydraulic actuator cover was 3D printed by applying two materials, namely PLA and ABS. Subsequently, the printed shape was scanned to analyze the material properties, dimensional change characteristics, dimensions, and scan shape as a real model. To compare and analyze material-specific 3D printing dimensions, a non-contact mobile laser scanner was used to scan a portion of the printed hydraulic actuator cover and the final alignment shape of the 3D printed part was studied on the basis of the design model.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1993년도 추계학술대회발표논문집; 서강대학교, 서울; 25 Sep. 1993
• /
• pp.194-211
• /
• 1993

This paper proposes an optimal incentive scheme for environmental pollution and output control in oligopoly markets under asymmetric information situation where the regulator has no information about each firm's technology on output productions and pollution abatements. We compare two interesting optimal incentive schemes (one is static model previously proposed and the other is dynamic model suggested in this paper), analyze features of these schemes, and carefully discuss its relevances to other schemes.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.1-12
• /
• 1997

We consider an M/M/2 queue with two servers placed in series. System performance measures that we present in closed expressions are the first and the second moments for the system size, the queue walting time and the sojourn time. We also present an algorithm for computing the queue waiting time distribution function based on the randomization method. As an application, we analyze the double tollbooth system and compare its performance with the conventional single tollbooth system's.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.25-28
• /
• 2000

In this paper, we assume various number of multipaths in one chip duration according to spreading bandwidth. And we take into account of the effects of autocorrelation and relative phases among multipath components within one chip duration, and analyze fading effects. We derive the average error probability for different number of users. Then, we compare the performance of W-CDMA systems with different bandwidths. From the simulation results for different band-widths, wideband CDMA systems show better performance than narrowband CDMA systems in vehicular and pedestrian environments.