• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.431-436
• /
• 2008

We have extended an absolute evaluation method to obtain the ratio error and phase displacement of a current transformer (CT) up to primary current of 40,000 A by measuring four parameters of equivalent circuit in CT. The method was applied to CTs under test with the current ratios in the range of 5,000 A / 5 A - 40,000 A / 5 A. The ratio error and phase displacement of the CTs under test obtained in this study are consistent with those measured at the national institutes in Canada and Germany using the same CTs under test within an expanded uncertainty (k = 2) in the overall current ratios.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.421-427
• /
• 2009

This paper has proposed 1-2-1 coded cooperative communication that is a combination of STBC and ARQ. Coded cooperative communication is a protocol that integrates channel coding with cooperative communication. In this paper consider convolution encoder. ARQ method can increase the spectral efficiency than conventional cooperative communication because if the received signal from source node is satisfied by the destination preferentially, the destination transmits ACK message to both relay node and source node and then recovers the received signal. Where each relay 1, 2 forwards a punctured portion of receive data. When relay transmit to destination apply STBC the reliability to increase. Moreover this protocol can get better BER performance of receiver using simple comparator. We verified BER performance for the proposed protocol through Monte-Carlo simulation over Rayleigh fading plus AWGN.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.7
• /
• pp.273-281
• /
• 2003

This paper proposes a new time synchronization scheme for the Automatic Identification System(AIS). The proposed scheme utilizes a Temperature Compensated Crystal Oscillator(TCXO) as a local reference clock, and consists of a Digitally Controlled Oscillator(DCO), a divider, a phase comparator, and register blocks. Primary time reference is IPPS from GPS receiver that is synchronized to Universal Time Coordinated(UTC). And if GPS is unavailable, other station's signal is utilized as secondary time reference. The phase comparator measures time difference between the 1PPS and the generated transmit clock. The measured time difference is compensated by controlling the DCO and the transmit clock is synchronized to the Universal Time Coordinated(UTC). The synchronized transmit clock(9600Hz) is divided into the transmitting time slot(37.5Hz). The proposed scheme is tested in an experimental AIS transponder set. The experimental result shows that the proposed module satisfies the timing specification of the AIS technical standard, ITU-R M.1371-1.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.586-592
• /
• 2014

In this paper, high efficiency power management IC(PMIC) with DT-CMOS(Dynamic threshold voltage Complementary MOSFET) switching device is presented. PMIC is controlled PWM control method in order to have high power efficiency at high current level. The DT-CMOS switch with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuit consist of a saw-tooth generator, a band-gap reference(BGR) circuit, an error amplifier, comparator circuit, compensation circuit, and control block. The saw-tooth generator is made to have 1.2MHz oscillation frequency and full range of output swing from supply voltage(3.3V) to ground. The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on current mode PWM control circuits and low on-resistance switching device, achieved the high efficiency nearly 96% at 100mA output current. And Buck converter is designed along LDO in standby mode which fewer than 1mA for high efficiency. Also, this paper proposes two protection circuit in order to ensure the reliability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.119-122
• /
• 2007

In this paper, we propose the method of hardware-design for the division operation of image frame-unit processing in mobile phone camera. Generally, there are two types of the data processing, which are the parallel and serial type. The parallel type makes it possible to process in realtime, but it needs significant hardware size due to many comparators and buffer memories. Compare the serial type with the parallel type, the hardware size of the serial type is smaller than the other because it uses only one comparator, but serial type is not able to process in realtime. To use the hardware resources efficiently, we employ the serial divider since frame-unit operation for image processing does not need realtime process. When compared with both in the same bit size and operating frequency, the hardware size of the serial divider is approximately in the ratio of 13 percentage compared with the parallel divider.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.873-879
• /
• 2010

In this paper, MPEG2(Moving Picture Expert Group 2) image data video decoding technique is presented, it is Huffman decoding method and fractal image method which is very complexive algorithm and have too much times to implement this method. This have defect of overlap decoding and transport work because of impossible to represent objective value of resemblance. The proposed method was calculated the mathematical absolute image resemblance and simplify the moving picture process to reducing the step of moving picture codefying. The results show that smoothed moving picture compared recent methods.

• Smart Media Journal
• /
• v.5 no.3
• /
• pp.49-53
• /
• 2016

Related researches are progressing that method of non-contact method using the electromagnetic field on the human body by detecting the motion recognition signal is the limitations of time and space, so less than the existing systems. In this paper, we designed the circuit system that can implement the hardware that can detect the electric field signal of the human body non-contact method to increase the recognition rate to screen this digital waveform. The PCB design Used to automatically increase of composition of the circuit and the linkage of the comparator digital waveform with circuit simulation of the system. At same time for evaluate the characteristics of the whole circuit system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.141-146
• /
• 2016

This paper presents a method to improve time interval error for asynchronous communication systems. The proposed method is designed and simulated with multi-phase VCO, interpolator, phase selector, up-down counter, comparator and adder. The simulation results for CAN communication system show that the maximum time interval error can be tightly managed for satisfying the required specification. The proposed frequency modulation method can be properly used for asynchronous communication systems requiring high reliability.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.628-635
• /
• 2019

This paper proposes sliding mode control (SMC) method for improvement of dynamic response for IPMSM based on DTC with constant switching frequency. DTC with constant switching frequency method consists of PI torque controller and triangular comparator for constant torque error status. It has the poor dynamic response compared to conventional DTC. This paper proposes improvement method of dynamic response of DTC with constant switching frequency by using SMC. Simulation results confirm the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.638-640
• /
• 1996

This paper presents microprocessor-based Digital Position Detection Unit using the inductive radio line and the antennas in train signaling system. This comprises the Fail-Safe system due to the dual controlled system to drive with safe-side even in events of faults, and designs the FSC(failure safe comparator). And the method of Markov Modeling is described for the reliability evaluation of system.