• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.61-66
• /
• 2008

Recently, portable devices which require small area and low power consumption employ applications using 3D graphics such as 3D games and 3D graphical user interfaces. We propose an efficient clipping engine algorithm which is suitable in 3D graphics pipeline. The clipping operation is divided into two steps: one is the selection process in the transformation engine and the other is the pixel clipping process in the scan conversion unit. The clipping operation is possible with addition of simple comparator. The clipping for the Y-axis is achieved in the edge walk stage and that for the X and Z-axis is performed in the span processing. The proposed clipping algorithm reduces the operation cycles and the area of of 3D graphics pipelines. We designed a 3D graphics pipeline with the proposed clipping algorithm using Verilog-HDL and verifies the operation using an FPGA.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.152-159
• /
• 2004

In this study, we design the one-chip PWM IC with high voltage power switch (300V class LDMOSFET) for SMPS (Switching Mode Power Supply) application. Reference circuits generate constant voltage(5V) in the various of power supply and temperature condition. Error amp. is designed with large DC gain $({\simeq}65dB)$, unity frequency $({\simeq}190kHz)$ and large $PM(75^{\circ})$. comparator is designed with 2 stage. Saw tooth generators operate with 20kHz oscillation frequency. Also, we optimize drift concentration & drift length of n-LDMOSFET for design of high voltage switching device. It is shown that simulation results have the breakdown voltage of 350V. (using ISE-TCAD Simulation tool). PWM IC with power switching device is designed with 2um design rule and Bi-DMOS technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.666-676
• /
• 1992

In this paper, algorithm and testable circuit to find all PSF(Pattern Sensitive Fault ) occured in RAM were proposed. Conventional test circuit and algorithm took much time in testing because consecutive test for RAM cells or f-dimensional memory struciure was not employed. In this paper, methodology for parallel RAM-testing was proposed by compensating additional circuit for test to conventional RAM circuit. Additional circuits are parallel comparator, error detector, group selector circuit and a modified decoder used for parallel testing. And also, the constructive method of Eulerian path to obtain efficient test pattern was performed. Consequently, If algorithm proposed in this paper Is used, the same operations as 32sxwor4 lines will be needed to test b x w=n matrix RAM. Circuit simulation was performerd, and 10 bits x :If words testable RAM was designed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.49-55
• /
• 2005

In this paper, the phase locked harmonic oscillator(PLHO) using the analog PLL(Phase Locked Loop) is designed and implemented for a wireless LAN system. The harmonic oscillator is consisted of a ring resonator, a varactor diode and a PLL circuit. Because the fundamental fiequency of 8.5 GHz is used as the feedback signal for the PLL and the 2nd harmonic of 17.0 GHz is used as the output, a analog frequency divider for the phase comparison in the PLL system can be omitted. For the simple PLL circuit, the SPD(Sampling Phase Detector) as a phase comparator is used. The output power of the phase locked harmonic oscillator is 2.23 dBm at 17 GHz. The fundamental and 3rd harmonic suppressions are -31.5 dBc and -29.0 dBc, respectively. The measured phase noise characteristics are -87.6 dBc/Hz and -95.4 dBc/Hz at the of offset frequency of 1 kHz and 10 kHz from the carrier, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.781-788
• /
• 2017

This paper proposes a new algorithm for comparing amplitude between multiple digital input signals and its digital logic architecture. After simultaneously comparing multiple inputs, the proposed algorithm can provide the information of the largest (or smallest) value among them by using a simple digital logic function. The drawback of the method is to increase hardware resource. To overcome this we propose a reuse method of the overlapped logic operation. The proposed method focuses on enhancing the operational clock frequency, in other words decreasing combinational delay time. After implementing the comparing method with HDL (hardware description language), we experiment on it with environment of Cyclone III EP3C40F324A7 FPGA of Altera Inc. In case of 4 input signals, it can increase the operational speed as mush as 1.66 times with 1.20 times the hardware resource. In case of 8, it can also have 2.29 times the clock frequency and 2.15 times the hardware resource.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1259-1264
• /
• 1999

In this paper, the High-speed, Low-power Analog-Digital Conversion Archecture is porposed using the Pipelined archecture for High-speed conversion rate and the Successive-Approximation archecture for Low-power consumption. This archecture is the Successive-Approximation archecture using Pipelined Comparator array to change reference voltage during Holding Time. The Analog-to-Digital Converter for video processing is designed using 0.8${\mu}{\textrm}{m}$ CMOS tchnology. When an 6-bit 10MS/s Analog-to-Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 37dB at a sampling rate of 10MHz with 100KHz sine input signal. The power consumption is 1.46mW at 10MS/s. When an 8-bit 10MS/s Analog-to Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41dB at a sampling rate of 100MHz with 100KHz sine input signal. The power consumption is 4.14m W at 10MS/s.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.34-41
• /
• 1998

An integrated circuit for magnetic stripe storage system is implemented. All the analog and digital circuits are integrated in one chip. The analog block contains preamplifier, peak detecter, comparator and reference generater. And digital block includes reference window signal generater, up/down counter for F/2F signal measurement, bit-error detection logic, and control logic. Both the encoding and decoding functions for F/2F signal processing are provided. An AGC(automatic gain control) circuit which was included in conventional circuits is eliminated due to optimized circuit design. Misreading prevention circuits are also proposed by fixing up new reference bit when broken bits are detected. The prototype chip is implemented using $0.8{\mu}m$ N-well CMOS technology and operates from 3.3 V to 7.5 V of supply voltage. It occupies a die area of $3.04mm^2(1.6mm{\times}1.9mm)$ and dissipates 8 mW with a 5 V supply voltage.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.47-58
• /
• 1999

As the performance of processors improves, cache memories are used to overcome the difference of speed between processors and main memories. Generally cache memories are embedded and small sizes, fault coverage is a more important factor than test time in testing point of view. A new test algorithm and a new BIST architecture are developed to detect various fault models with a relatively small overhead. The new concurrent BIST architecture uses the comparator of cache management blocks as response analyzers for tag memories. A modified scan-chain is used for pre-testing of comparators which can reduce test clock cycles. In addition several boundary scan instructions are provided to control the internal test circuitries. The results show that the new algorithm can detect SAFs, AFs, TFs linked with CFs, CFins, CFids, SCFs, CFdyns and DRFs models with O(12N), where N is the memory size and the new BIST architecture has lower overhead than traditional architecture by about 11%.

• Journal of Animal Environmental Science
• /
• v.8 no.2
• /
• pp.63-72
• /
• 2002

In Korea, a need of automatic dairy farm management system has been increased to lower production cost and to strengthen international competition. However, the present management system was mostly relied on foreign technologies and caused some problems in post management and after-sales services. Therefore, though there is a problem of price and quality at present, domestic technologies of the management system should be developed for the long run. This study was conducted to develop an electronic identification unit for an automatic dairy farm management system. The developed system was consisted of a tag, a reader, a switching circuit, and a personal computer. The tag attachable to each individual cow was developed to transmit individual radio frequency(RF) code into the air with modulation of ASK(amplitude shift keying). And the switching circuit was added to avoid confusion on reception and transmittance. The reader attached to a feeding device was developed to transmit activating signal periodically and to identify code of the individual tag when the tag was approached to the device. The reader was consisted of an active filter, a detecter, a comparator and a microcontroller. The test result was feasible enough to apply it for the automatic farm management system and the identified maximum distance was about 37cm.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.304-310
• /
• 2015

A SCALDO(Supercapacitor Assisted LDO) regulator is a new regulator having advantages of a SMPS(Switch Mode Power Supply) which has a good efficiency and a LDO(Low Drop-out) regulator which has stable output characteristics and good EMI(Electro Magnetic Interference) characteristics. However, a conventional SCALDO regulator needs a lot of power consumption to control its switches and it drops an efficiency of the circuit. In this paper, to reduce switching power consumption and improve an efficiency of the circuit, a new SCALDO regulator adopting MOSFETs as its switching parts is proposed and it is found out that the proposed SCALDO regulator has the maximum 9.5% higher efficiency than the conventional SCALDO regulator. We also try to simplify production process of the circuit by changing switching control method of the circuit from MCU(Micro-controller unit) based firmware control to hardware control using a comparator and a T-F/F(Flip Flop).