• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.286-293
• /
• 2005

In soft ground the settlement criterion usually governs. Therefore, it is very important not only reasonable assessment of the allowable bearing capacity of the soil but also reasonable assessment of settlement. In the previous studies by many other researchers, load concentration ratio and settlement reduction factor are usually proposed for estimating the settlement of granular compaction piles. In the previous studies, the reinforced ground with granular compaction piles is simplified as composite ground and the analysis is performed with in the basis of this assumption. However, the lateral deformation of granular compaction pile could not be considered and only the relative vertical strength between pile and soils could be considered in the analysis. In this study, a method adapting the Tresca failure criterion is proposed for calculating settlement of granular compaction pile. Proposed method can be considered the strength of pile material, pile diameter, installing distance of pile and the deformation behavior of vertical and horizontal directions of pile. In the presented study, large-scale field load test is performed and the results are described. Also, predictions of settlements from the proposed method are compared with the results of the load test. In addition, a series of parametric study is performed and the design parameters are analyzed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.705-712
• /
• 2005

Among soft ground treatment methods with granular soil used in domestic, the sand compaction pile method has been utilized greatly, but, as a result of exhaustion of sand and increase of unit cost, a necessity of an alternative method is suggested. In this study, the static load tests for group crushed-stone compaction piles which were constructed at in-situ site were performed. Pile diameter was 700mm and area of loading plates were changed. The static load tests of single and group piles were performed for area replacement ratio of 20, 30 and 40%. Based on test results, bearing capacity of group crushed-stone compaction pile were estimated. The more both single pile and group pile increase, the more yield bearing capacity tended to increase. Also, the yield bearing capacity of a group pile is about 50% less than the yield bearing capacity of a single pile. If the ground reinforced with the crushed-stone compaction pile is replacement ratio of $20{\sim}40%$, RIYB of both single pile and group pile increases qualitative tendency of linear more than original ground

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.595-598
• /
• 2010

Many economical and efficient methods such as sand drain method(SD), plastic board drain(PBD), sand compaction pile, vacuum consolidation method, etc., have been used for soft grounds. The case of sand compaction pile has an effect on accelerating consolidation and increasing bearing capacity by penetration at regular intervals under soft grounds for reducing the drainage path. But, this method has caused not only the nature damage by extracting the sands indiscreetly but also the economical problem for importing the sands because it needs so much sand to make the sand compaction pile. Thus, this study choosed the bottom ash which has similar engineering characteristics with sand. It was performed that clogging test and large direct shear test changing the bottom ash replacement ratio in soft ground for studying strength characteristics of soft ground using bottom ash compaction pile. As a result of the test, the internal friction angle was largely increased and the cohesion was decreased as the replacement ratio increased.

• 한국지반환경공학회 논문집
• /
• 제7권1호
• /
• pp.5-18
• /
• 2006

쇄석말뚝과 조립토 다짐말뚝은 연약지반의 보강, 극한지지력의 증대 및 기초 지반의 압밀을 가속화시키기 위한 목적으로 지난 수십 년 동안 폭넓게 사용되고 있다. 조립토 다짐말뚝의 극한지지력은 조립토 말뚝의 팽창파괴를 억제하기위한 지반의 횡방향 구속압에 지배된다. 한편, 조립토 다짐말뚝은 충분한 횡방향 구속압이 발휘되지 못하는 압축성 점토지반이나 연약지반에서는 그 기능을 기대하기 어려운 점이 있다. 따라서 본 연구에서는 기존 조립토 다짐말뚝과 일부 심도를 빈배합 콘크리트로 보강한 조립토 다짐말뚝에 대한 3차원 수치해석을 실시하여 그 결과를 비교, 분석하였다. 또한, 본 연구에서는 수치해석결과를 바탕으로 침하저감계수에 대한 회귀분석식이 제시되었으며, 침하저감계수에 대한 변수분석을 통해 제안된 침하저감계수 회귀식의 타당성을 검증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.119-122
• /
• 2009

The gravel compaction pile method has been used as a soft foundation improvement method because bearing capacity and discharge capacity is excellent. But the discharge capacity decreased when the clogging was generated because the clay penetrate into a void of gravel compaction pile. Accordingly, the purpose of this study is to reduce the clogging generation in gravel compaction pile constructing in the soft ground and take a step to minimize a void of gravel compaction pile. And the proper mixing ratio was determined with the large scale direct shear test performed to get strength and permeability with mixing ratio of crushed stone and sand(100:0, 90:10, 85:15, 80:20, 75:25). As a result of the test, it was showed that internal friction angle was the highest at 85:15 mixing ratio of crushed stone and sand and we can make sure a tendency of internal friction angle's decrease when the mixing ratio of crushed stone and sand passed 15%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.443-452
• /
• 2005

The compaction pile methods with low replacement area ratio used sand(SCP) or gravel(GCP) has been usually applied to improvement of soft clay deposits. In order to design accurately compaction pile method with low replacement area ratio, it is important to understand the mechanical interaction between sand piles and clays and its mechanism during consolidation process of the composition ground. In this paper, a series of numerical analyses on composition ground improved by SCP and GCP with low replacement area ratio were carried out, in order to investigate the mechanical interaction between sand piles and clays. The applicability of numerical analyses, in which and elasto-viscoplastic consolidation finite element method was applied, could be confirmed comparing with results of a series of model tests on consolidation behaviors of composition ground improved by SCP. And,through the results of the numerical analyses, each mechanical behaviors of compaction piles and clays in the composition ground during consolidation was elucidated, together with stress sharing mechanism between compaction piles and clays.

• 한국지반환경공학회 논문집
• /
• 제11권7호
• /
• pp.57-63
• /
• 2010

국토의 70%를 산이 차지하고 있는 우리나라의 여건으로 볼 때 효율적이고 경제적인 연약지반 개량의 필요성이 점차 높아지고 있다. 해양개발을 위한 연약지반개량 공법에는 모래다짐말뚝공법, 치환공법, 프리로딩공법, 대기압공법, 지하수위 저하공법, 팩드레인공법, 생석회말뚝공법 등이 있는 데, 그 중 모래다짐말뚝공법은 모래의 수급이 어려워져 수입하는 등의 경제적인 문제점과 모래채취로 인한 자연 훼손의 문제점을 야기하므로 이에 대한 대책공법이 시급한 실정이다. 최근, 모래와 공학적 성질이 유사한 화력발전소 부산물인 저회를 대체 재료로 활용하기 위한 연구가 이루어지고 있으나 연약지반 개량 재료로 활용하기 위한 연구는 미미한 실정이다. 따라서, 본 연구에서는 10~80%의 치환율로 복합지반을 조성하여 대형직접전단시험, 전단시험, 표준압밀시험을 실시한 후 저회다짐말뚝의 전단특성과 압밀특성을 규명하였다. 연구결과 저회다짐말뚝의 치환율이 증가에 따라 전단강도 정수는 증대하고, 침하저감 계수 및 $t_{90}$은 감소하는 경향이 나타났다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.187-193
• /
• 2001

This paper is results of extensive centrifuge model experiments about design factors influencing the bearing capacity and the settlement behaviors of SCP (Sand Compaction Pile). Centrifuge model tests were carried out changing design factors for SCP method such as replacement area ratio (as= 20, 40, 70%), improvement ratio to footing width (W/B = 1, 2, 3), and amount of fines in sand pile (#200 = 5, 10, 15). Therefore, the effects of these design factors on the bearing capacity and the settlement behavior of SCP were investigated and changes of stress concentratio rato due to such an design factors were also investigated. Centrifuge model testing technique for preparing and installing centrifuge model of sand compaction pile, using freezing them, was also developed. As results of centrifuge model tests, more fines in sand compaction pile increases the bearing capacity of SCP. Optimum improvement ratio to footing width was found to be 2. Values of stress concentration ratio was in the ranges of 1.5 - 3.5. The depth of bulging in sand piles was found in the range of 2.0 - 2.5 times of pile diameter.

• 산업기술연구
• /
• 제22권A호
• /
• pp.145-151
• /
• 2002

This paper is results of extensive centrifuge model experiments about design factors influencing the bearing capacity and the settlement behaviors of SCP (Sand Compaction Pile). Centrifuge model tests were carried out changing design factors for SCP method such as replacement area ratio (as= 20, 40, 70%), Improvement ratio to footing width (W/B = 1, 2, 3), and amount of fines m sand pile (#200 = 5, 10, 15). Therefore, the effects of these design factors on the bearing capacity and the settlement behavior of SCP were investigated and changes of stress concentratio rato due to such an design factors were also investigated. Centrifuge model testing technique for preparing and installing centrifuge model of sand compaction pile, using freezing them, was also developed. As results of centrifuge model tests, more fines in sand compaction pile increases the bearing capacity of SCP. Optimum improvement ratio to footing width was found to be 2. Values of stress concentration ratio was in the ranges of 1.5 - 3.5. The depth of bulging in sand plies was found in the range of 2.0 - 2.5 times of pile diameter.

• 한국지반환경공학회 논문집
• /
• 제13권3호
• /
• pp.53-58
• /
• 2012

일반적으로 연약지반인 점성토 지반이나 느슨한 사질토 지반을 개량하기 위하여 모래다짐말뚝(SCP)공법 또는 쇄석다짐말뚝(GCP)공법이 쓰여지고 있다. 하지만 모래다짐공법은 모래의 수급부족과 모래채취로 인한 환경파괴와 같은 문제점이 있으며, 쇄석다짐공법은 쇄석다짐재료의 클로깅으로 인하여 배수재의 투수계수가 저하되는 문제점이 있다. 최근, 모래와 공학적 성질이 유사한 화력발전소 부산물인 저회를 모래의 대체 재료로 활용하기 위한 연구가 이루어지고 있다. 본 연구에서는 저회혼합다짐말뚝에 대한 기초적 연구로써 조립재료 및 치환율에 따른 조립재료 혼합다짐말뚝의 거동특성을 수치해석적으로 규명하였다. 특히, 말뚝중심부로부터 거리에 따른 침하저감비(SRR)를 산정하였다. 연구 결과는 다음과 같았다. 조립재료에 따른 혼합다짐말뚝의 침하저감비 변화값은 유사한 형태를 보였으며 치환율에 따라 복합지반의 강성이 증대하여 침하저감비는 감소하는 형태를 보였다. 특히, 치환율 20~40%의 범위에서는 일반적으로 침하저감비의 증가가 큰 것으로 나타났고, 치환율 40% 이상에서는 증가치가 서서히 감소하는것으로 나타났다. 본 연구에서 적용한 연약지반과 유사한 지반에 혼합다짐말뚝 적용 시 경제성을 고려하였을 때, 30~40%의 치환율이 적절할 것으로 사료된다.