Vincent Dupont;Victor Blanc;Thierry Beck;Marc Lainet;Pierre Sciora
Nuclear Engineering and Technology
/
제56권3호
/
pp.973-979
/
2024
In the framework of the Generation IV research and development project, in which the French Commission of Alternative and Atomic Energies (CEA) is involved, a main objective for the design of Sodium-cooled Fast Reactor (SFR) is to meet the safety goals for severe accidents. Among the severe ones, the Unprotected Transient OverPower (UTOP) accidents can lead very quickly to a global melting of the core. UTOP accidents can be considered either as slow during a Control Rod Withdrawal (CRW) or as fast. The paper focuses on fast UTOP accidents, which occur in a few milliseconds, and three different scenarios are considered: rupture of the core support plate, uncontrolled passage of a gas bubble inside the core and core mechanical distortion such as a core flowering/compaction during an earthquake. Several levels and rates of reactivity insertions are also considered and the thermal-mechanical behavior of an ASTRID fuel pin from the ASTRID CFV core is simulated with the GERMINAL code. Two types of fuel pins are simulated, inner and outer core pins, and three different burn-up are considered. Moreover, the feedback from the CABRI programs on these type of transients is used in order to evaluate the failure mechanism in terms of kinetics of energy injection and fuel melting. The CABRI experiments complete the analysis made with GERMINAL calculations and have shown that three dominant mechanisms can be considered as responsible for pin failure or onset of pin degradation during ULOF/UTOP accident: molten cavity pressure loading, fuel-cladding mechanical interaction (FCMI) and fuel break-up. The study is one of the first step in fast UTOP accidents modelling with GERMINAL and it has shown that the code can already succeed in modelling these type of scenarios up to the sodium boiling point. The modeling of the radial propagation of the melting front, validated by comparison with CABRI tests, is already very efficient.
콘크리트에서 염소 이온과 같은 열화물질의 이동은 응력상태 및 재령의 증가에 기인한 공극구조에 따라 변화한다. 본 연구에서는 재령 28일, 91일, 그리고 365일 양생된 OPC 콘크리트의 압축 및 인장 하중조건을 고려하여 촉진탄산화 실험을 실시하였으며, 탄산화 거동을 평가하였다. KS F 2584에 의거하여 탄산화 속도계수를 도출하였는데, 하중을 고려하지 않을 경우 탄산화 속도계수는 재령 28일 대비 재령 91일은 50.0 % 수준으로, 재령 365일에서는 44.8 % 수준으로 감소하였다. 28일 재령 시, 하중의 영향으로 인해 인장재하영역에서는 103.9 ~ 108.8 % 수준으로 압축재하영역에서는 91.9 ~ 104.6 % 수준으로 변화하였다. 재령이 증가함에 따라 탄산화 속도는 크게 감소하였는데, 30 % 인장재하영역에서는 탄산화 속도계수가 1년 경과시 47.3 % 수준으로, 60 % 인장재하영역에서는 52.5 % 수준으로 감소하였으며 30 % 압축재하영역에서는 45.8 %로, 60 % 압축재하영역에서는 44.9 % 수준으로 감소하였다. 압축재하영역 30 %에서는 공극압밀로 인해 탄산화 속도계수가 감소하였으나 하중의 증가에 따라 압축재하영역 60 %에서는 미세균열의 영향으로 탄산화 속도계수가 증가하였다. 또한 인장재하영역은 압축부와는 다르게 탄산화 속도계수가 선형적으로 증가하는 경향을 나타내었다.
In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1
The purpose of this study was to examine the qualitative variation of human fetal-cord sera (HCS) and to accept the sera in human lVF-ET program. One hundred and sixteenth RCS were tested with 1772 2-cell embryos of F1 (C57BL x CBA) virgin mice, Ten to sixteenth embryos were cultured in m-KRB medium with a aliquot of each serum (10%, v/v) or with bovine serum albumin(O.4%, w/v) as a control medium. Embryonic development were recorded at every 24hr for 4 days by such events as cellular compaction, cavitation, and hatching. In the control groups of eight assays, 98.1%(106/ 108) of 2-ce1l embryos developed above expanded blastocyst and the embryonic development was unified through the tests. But the developmental pattern in medium with each serum was various. Namely, the sera that supported development of 100% 2-cell embryos to above morula, early blastocyst, expanded blastocyst and hatching blastocyst was 45,7%(53/116) , 35.3%(41/116), 15.5%08/116.) and 6.9-%(8/116), respectively. And the sera that supported development of above 80% 2-cell embryos to the each embryonic stage was 92.2% (107/116), 83.6%(97/116), 63.8%(74/116) and 36.2%(42/116), respectively. Meanwhile two kinds of toxic pattern to the embryonic development were observed in some sera. The first pattern is that some sera arrested development of most embryos in pre- or post-stage of morula or blastocyst. The second pattern is that some sera promoted or arrested a part of embryos in the same dish. The ability of serum was depended on the batch of serum. Finally we could accept 69%(80/116) of the tested sera for human IVF-ET program. The base line for acceptance was the ability that supported above 80% 2-ce1l embryos to blastocyst. But some deterious sera were contained in this range. We cut off about 10% of the sera (83.6% , 97/116) that passed the baseline. This final percent of sera was similar to that of grade N of this study.
우리나라 유통상토에 대한 물리적 표준분석법을 설정하기 위한 연구를 실시하였다. 국내 시중에 유통되고 있는 53개 품목의 원예용 상토와 9개 품목의 수도용 상토를 대상으로 설정된 분석법을 적용하여 실험하였다. 입자밀도의 측정은 가스형 피크노메타(Micromeritics Co. Model 1305)를 사용하면 속도와 정확성 면에서 매우 유리하였다. 용적밀도는 구미에서 Sandbox법에 의한 용적밀도를 기본으로 하기 때문에 이와 유사한 성적을 얻을 수 있는 다양한 실험을 한 결과, 추다짐법(Plunger compaction method)이 가장 유의성 있는 측정 방법으로 밝혀졌다. 한편 가스형 피크노메타법에 의한 우리나라 유통상토의 입자밀도는 원예용이 1.93, 수도용이 2.43 Mg m$^{-3}$로 나타났으며, 추다짐법에 의한 용적밀도는 원예용이 0.22, 수도용이 1.01 Mg m$^{-3}$로 각각 나타났다. 수분함량은 105$^{\circ}C$ 건조기에서 16시간 건조하여 수도용상토는 (최초 무게-건조 후 무게) / (건조 후 무게) $\times$ 100으로, 원예용상토는 (최초무게 - 건조 후 무게) / (최초 무게) $\times$ 100으로 하였다. 보수력은 주로 저압용으로서 Eijkelkamp사의 Sandbox법을 사용하여 0.5, 1, 3, 5, 7, 10 ㎪의 수분장력 상태의 수분함량을 조사하였다. 포화수리전도도는 직경 5cm$\times$높이 20cm인 아크릴 원통을 이용하여 정수위별에 의한 포화수리전도도를 측정하였다. 신분석법에 의한 유통상토의 수분함량은 원예용이 평균 46.34%, 수도용이 평균 16.89%이었고 원예용 상토의 EAW는 28.4%, WBC 7.01%, OMP는 5.60 ㎪로 나타났으며, 육묘를 위한 적정 수분함량은 44.41%이었고 포화수리전도도는 1.71 cm $min^{-1}$이었다. 상토 평량시 무게를 비교한 결과 상토 부피를 달리하여도 고도의 유의성이 있었고, 상토 20cc의 평균무게는 4.92g(2.08-8.83g)이었다. 상토의 EC 측정시 상토:물의 비율이 1:2(v:v)와 1:5(v:v)분석치에 2.5배한 EC 값과는 고도의 정의 상관관계가 있었으며, 유럽법과 일본법(전농)과의 관계는 고도의 정의 상관관계가 있었다 또한 새로운 분석법(v:v 1:5)으로 측정한 EC의 평균값은 국내산 0.64, 수입산 0.33 dS m$^{-1}$이 었다. 상토의 pH 측정시 상토:물의 비율을 1:2(v:v)와 1:5(v:v)와의 관계에서는 정의 상관관계를 보였으며, 유럽법과 일본법(전농)과의 관계도 역시 고도의 정의 상관관계가 있었고, 신 분석법에(v:v 1:5) 의한 분포비율은 국내산, 수입산모두 pH 6.1-6.5의 범위에서 가장 높았다.
Phospholipase C (PLC)는 다양한 세포주에서 세포내 신호전달에 중요한 역할을 한다고 알려져 있으나, 생쥐 난자성숙 과정과 착성전 배아발생 과정에서 PLC의 역할과 발현은 아직 연구된 바 없다. 본 연구에서는 난자성숙과 착상전 배아발생 과정에서 생쥐의 PLC \beta 1과 \gamma 1의 유전자 발현을 조사하기 위하여 한 개의 난자 혹은 배아에서 추출된 total RNA를 사용하여 경쟁적 RT-PCR 방법으로 mRNA를 정량하였다. PLC \gamma 1의 유전자 발현을 조사하기 위하여 한 개의 난자 혹은 배아에서 추출된 total RNA를 사용하여 경쟁적 RT-PCR 방법으로 mRNA를 정량하였다. PLC \gamma 1의 유전자는 전혀 발현하지 않았다. 수정후 PLC \betta 1과 \gamma 1의 유전자 발현은 상실기 배아에서 증가하기 시작하여 포배기 배아에서는 현저히 증가하였다. 난자성숙과 착상전 배아발생 과정에서 protein kinase C(PKC) 신호전달체게에 의한 PLC의 역할을 조사하기 위하여 PKC의 억제제인 sphingosin, PKC의 촉진제인 $diC_{8}$, 그리고 PLC의 억제제인 U73122의 효과를 조사하였다. Spihingosine은 처리후 1시간 이내에 대조군에 비해 20% 정도의 난자성숙을 촉지하였으나 U73122는 유효한 효과를 보이지 않았다. U73122는 상실기 배아의 compaction을 억제하였으나 $diC_{8}$에 의하여 부분적으로 극복되었다. 이상의 결과는 PLC \beta 1과 \gamma 1 유전자가 생쥐의 착상전 발생단계에서 특이젖으로 발현하고 있으며, 난자성숙과 착상전 초기배아에서 PKC-PLC 신호전달체계가 관여하고 있으리라 사료된다.
연구목적: 본 연구의 목적은 수종의 sealer를 이용하여 각기 다른 양의 잔여수분이 존재하는 근관을 충전 시, 근관충전의 sealing ability를 glucose leakage model로 평가하는 것이다. 연구 재료 및 방법: 발치된 90개의 단근치를 치관부를 잘라내고 #45 / 0.06 taper까지 확대한 후, 12개의 실험군 (n = 7)과 2개의 대조군 (n = 3)으로 나누었다. 실험군을 3가지 습윤 상태에서 (a, DRY; b, PAPER POINT DRY; c, WET) 4종류의 sealer로 (Group 1-3: Sealapex; Group 4-6: AH plus; Group 7-9: Tubuli-seal; Group 10-12: EndoRez), warm vertical compaction method를 이용해 충전하였다. $37^{\circ}C$, 습도 100%에서 7일 동안 보관하고 glucose leakage model을 이용하여 치관부로부터 치근부 방향의 미세누출을 정량화하였다. 1, 3, 7, 14, 21, 30일 째 누출된 glucose의 농도를 spectrophotometer로 측정하였다. 결과: 관찰기간 동안 AH plus/DRY군 (Group 4)이 12개 그룹 중 가장 적은 양의 leakage를 보였다 (20.78 mmol/L). 반면에 Tubuli-seal/WET군 (Group 9)이 12개 그룹 중 가장 높은 양의 leakage를 보였다 (178.75 mmol/L). 결론: 본 연구의 결과는 충전 시 근관 내의 습윤 상태와 sealer 종류가 microleakage에 유의한 영향을 미친다는 것을 입증하였다. 그러므로 sealer 종류에 따라 각기 다른 근관 건조 방법을 사용하는 것이 근관치료에서 더 좋은 결과를 얻을 수 있는 방법일 것이다.
토공의 생산성을 향상시키기 위하여 선행 연구에서 건설장비 플릿관리 시스템이 제시되었다. 그러나 이론과 실제 사이에 차이가 존재하였다. 이러한 문제점을 극복하기 위하여 전문가와 엔지니어들의 의견을 구하여 네 가지 개선사항을 제시하고 기존의 시스템에 적용을 하였다. 첫 번째로, 기존의 시스템은 하나의 하드웨어로 구성되어 있어서 오피스와 건설장비에 동시에 설치하여 사용을 할 수 없었다. 따라서 오피스와 건설장비에 별도로 탑재하여 사용할 수 있도록 서버모듈과 모바일 모듈로 분리하여 개발을 하였다. 두 번째로, 기존의 시스템에 사용된 수송모델 알고리즘은 토량배분시 최소의 이동거리를 제시하지만 성토구역이 모여 있지 않게 계획이 됨으로써 생산성 저하를 가져오는 문제점이 있었다. 이러한 문제점을 해결하기 위한 개선된 알고리즘을 제시하였다. 세 번째로, 자동화된 좌표변환이 가능하게 함으로써 토공현장의 3D 지형도상에 실시간으로 건설장비의 위치가 나타나도록 개선하였다. 네 번째로, 토공작업 초반에 장비그룹이 형성되고 작업상태나 현장상황에 따라서 장비의 수가 변화해야 하는데 기존의 시스템에서는 이러한 기능이 적절하게 작동하지 않았다. 개선된 시스템에서는 이러한 문제점이 수정되었다. 이러한 개선사항들은 제시된 시스템을 더욱 현실적으로 적용 가능한 시스템으로 만들게 되며 궁극적으로 토공작업의 생산성 향상을 도모할 수 있게 할 것이다.
중공사막의 일단이 자유롭게 움직여 막 오염 현상을 줄일 수 있도록 고안된 침지형 프리엔드 중 공사막 모듈에 아주 짧은 주기로 역세를 실시하는 역충격을 적용하여 중공사막의 기초 오염 특성을 조사하였다. 본 연구에 사용된 막은 폴리설폰(PS, polysulfone)과 폴리아크릴로니트릴(PAN, polyacrylonitrile) 재질의 내경 0.7mm, 외경 1.3mm, 분획분자량 50,000인 한외 여과막을 사용하여 모듈을 제작 후 MLSS 10,000mg/L의 반응조를 침지하였다. PS 중공사막의 역충격 유무에 따른 투과율과 압력 변화를 측정하였다. 역충격을 가하지 않은 경우, 모듈의 투과율은 초기 3시간 동안 급격히 감소하였고 150시간 이후에 일정한 투과율을 나타내었다. 역충격을 가한 모듈의 투과율 감소율은 현저히 줄어들었다. PS과 PAN 재질 중공사막의 역충격에 대한 영향을 15kPa에서 비교한 결과 초기 투과율은 PS 막이 19lmh, PAN 막이 16lmh이었다. 그러나 PS 막은 급격한 막 오염으로 인하여 압력이 30kPa까지 상승하였고 PAN 막은 15kPa에서 거의 일정하게 유지되었다. 160시간 이후 역충격을 멈추었을 때 PAN 막의 투과율은 역충격이 있을 때보다 더욱 감소하였고 PS 막은 역충격을 주었을 경우와 비슷한 투과율을 나타내었다. PAN 막은 역충격으로 인하여 막의 오염이 지연되고 있는 상태에서 역충격의 영향이 없어지므로 막의 오염이 계속적으로 생기는 것이고, PS 막의 경우는 초기의 급격한 막의 오염 때문에 역충격으로 인한 막오염 지연효과가 적었다.
본 연구에서는 침하가 발생한 연약지반에 대하여 저유동성 몰탈에 의한 주입공법인 C.G.S공법의 적용성과 침하억제 효과를 확인하기 위하여 시험시공을 실시하였으며, 그 결과를 이용하여 지반조건에 적합한 설치직경, 간격, 심도, 주입재, 주입압 등 다양한 조건을 고려한 시공관리기준을 정하여 본 시공을 실시하였다. 본 시공과정 중에는 지반개량 효과를 파악하기 위하여 C.G.S개량 전, 후 현장지반조사 및 이에 따른 실내토질시험, 계측관리 등을 수행하였다. 현장 조사시험에 의한 강도특성 확인결과 C.G.S주입 주변지반은 개량전과 비교하여 전반적으로 지반강도가 증가되었음을 확인할 수 있었다. 또한, 계측관리 및 압밀특성을 분석한 결과 주변지반의 압밀특성이 개선되었음을 확인할 수 있었으며, 특히 C.G.S주입재의 압축강도시험 결과 주변지반에 비해 강성이 매우 큰 C.G.S주입에 따른 복합지반효과를 통해 지지력 증대효과 및 응력분담으로 장래침하량을 억제할 수 있는 것으로 나타났다. 이와 같이 연약점성토 지반에서 C.G.S주입시공에 의한 침하억제효과로부터 공법의 적용성이 매우 양호한 것을 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.