• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.292-297
• /
• 1989

To achieve fiber/resin reinforced composites with high quality (void-free, uniform compaction), a basic understanding of the principal factors related to a thermal cycle to cure the matrix and a pressure to compact the system is necessary. In this paper, some dielectric and mechanical properties of glass cloth reinforced epoxy composites are measured as a function of fabrication conditions, where the time that the pressure is applied to the sample during the cure process is controlled. Both the tensile strength and frequency characteristics of the sample are improved significantly when the pressure is applied at the start point of gelling.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.162-165
• /
• 2008

A novel planar lightwave circuit(PLC) triplexer using a three-waveguide interferometer(TWI) is proposed and examined using the transfer matrix and the beam propagation methods. The proposed triplexer consists of two three-waveguide couplers and three waveguides connecting the couplers. Simulation for the TWI triplexer shows the excess losses of 0.03 dB and 0.94 dB with the crosstalks of -22.3 dB and -14.5 dB in reception, respectively, for the wavelength of 1490- and 1550-nm, while showing the excess loss of 1.75 dB in transmission for the wavelength of 1310 nm. The proposed design shows compact feature as short as 11.5 mm for the refractive-index contrast of 0.45%.

• Transactions of Materials Processing
• /
• v.20 no.4
• /
• pp.303-308
• /
• 2011

Using a mechano-luminescent(ML) paint, which allows the visualization of fast propagating crack under conventional loading conditions, a catastrophic fracture mechanism associated to crack tip melting and wake bridging in bulk metallic glass, is described in this paper. Fracture occurs in two steps with, first, crack initiation from the mechanically machined sharp notch tip in a rectangular shaped compact tension specimen and melting of its tip due to intense shear deformation within very few deformation bands. Then, the crystalline phase in the glass matrix gradually converts the molten crack into a conventional bridged crack as it propagates.

• Journal of Powder Materials
• /
• v.3 no.1
• /
• pp.33-41
• /
• 1996

Nanostructured Cu-Pb powders were synthesized by mechanical alloying process. The variation of powder characteristics with mechanical alloying time was investigated by x-ray diffraction, differential scanning calorimetry, SEM and TEM. An electrical resistivity of the hot pressed specimens was also measured by using the nanovoltmeter. It was shown that mechanical alloying for 12 hours leads to a homogenization and a grain refinement to the nanometer scale under 20 nm. The mechanically alloyed Cu-Pb alloys represented the enhanced solid solubility of 10wt% Pb in the Cu matrix. The monotectic temperature of nanostructured Cu-Pb alloy decreased from equilibrium state of 955$^{\circ}C$ to 855$^{\circ}C$ due to reduced grain size effect. The analysis of electrical resistivity showed that the hot pressed MA Cu-5wt% Pb compact existed as a solid solution.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.94-98
• /
• 2001

fatigue life and nondestructive evaluation were examined experimentally using surface crack specimen and compact tension specimen of 5083 aluminium alloy. Acoustic emission signals emanated during failure of aluminum alloys has been the subject of numerous investigations. Possible sources of AE during deformation have been suggested as the dislocations, fracture of brittle particles and debonding of these particles from the alloy matrix. Fatigue life and penetration behavior of long surface crack can be evaluated quantitatively using K values proposed by authors. The influence of stress ratio on the frequency characteristics of AE signals were investigated.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.259-263
• /
• 2004

Rubber-modified epoxy resins have been employed as adhesive and matrix materials for glass and corbon-fiber composites. The behavior of fracture around a crack tip for rubber-modified epoxy resin is investigated through the acoustic emission (AE) analysis of compact tension specimens. Damage zone and rubber particles distributed around a crack tip were observed by a polarized optical microscope and an atomic force microscope (AFM). The damage zone in front of pre-crack tip in rubber-modified specimen $(15wt\%\; rubber)$ began to form at about $13\%$ level of the fracture load and grew in size until $57\%$ load level. After that, the crack propagated in a stick-slip manner. Based on time-frequency analysis of AE signals and microscopic observation of damage zone, it was thought that AE signals with frequency bands of 0.15-0.20 MHz and 0.20­0.30 MHz were generated from cavitation in the damage zone and crack propagation, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1796-1801
• /
• 2009

This paper is concerned with the problem of delay-dependent robust $H_{\infty}$ filtering for uncertain descriptor systems with time-varying delay. The considering uncertainty is convex compact set of polytoic type. The purpose is the design of a linear filter such that the resulting filtering error descriptor system is regular, impulse-free, and asymptotically stable with $H_{\infty}$ norm bound. By establishing a finite sum inequality based on quadratic terms, a new delay-dependent bounded real lemma (BRL) for delayed descriptor systems is derived. Based on the derived BRL, a robust $H_{\infty}$ filter is designed in terms of linear matrix inequaltity (LMI). Numerical examples are given to illustrate the effectiveness of the proposed method.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.697-699
• /
• 2004

Despite many successful spectral clustering algorithm (based on the spectral decomposition of Laplacian(1) or stochastic matrix(2) ) there are several unsolved problems. Most spectral clustering Problems are based on the normalized of algorithm(3) . are close to the classical graph paritioning problem which is NP-hard problem. To get good solution in polynomial time. it needs to establish its convex form by using relaxation. In this paper, we apply a novel optimization technique. semidefinite programming(SDP). to the unsupervised clustering Problem. and present a new multiple Partitioning method. Experimental results confirm that the Proposed method improves the clustering performance. especially in the Problem of being mixed with non-compact clusters compared to the previous multiple spectral clustering methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.34.3-34
• /
• 2001

The design method of H$\infty$ filter for discrete-time uncertain linear systems with multiple state delays is investigated. The uncertain parameters are assumed to be unknown but belonging to known convex compact set of polytope type less conservative than norm bounded parameter uncertainty. The modified H$\infty$ performance measure is introduced to consider the initial states values which affect the performance of filter. The objective is to design a stable H$\infty$ filter guaranteeing asymptotic stability of filtering error dynamics and minimizing H$\infty$ norm bound. The sufficient condition for the existence of filter and the filter design method are established by LMI (linear matrix inequality) approach.

• Kyungpook Mathematical Journal
• /
• v.59 no.2
• /
• pp.225-231
• /
• 2019

In a previous paper, the authors of this paper studied $2{\times}2$ matrices in upper triangular form, whose entries are operators on Hilbert spaces, and in which the the (1, 1) entry has a nontrivial hyperinvariant subspace. We were able to show, in certain cases, that the $2{\times}2$ matrix itself has a nontrivial hyperinvariant subspace. This generalized two earlier nice theorems of H. J. Kim from 2011 and 2012, and made some progress toward a solution of a problem that has been open for 45 years. In this paper we continue our investigation of such $2{\times}2$ operator matrices, and we improve our earlier results, perhaps bringing us closer to the resolution of the long-standing open problem, as mentioned above.