• ETRI Journal
• /
• v.21 no.4
• /
• pp.23-28
• /
• 1999

In this paper, we analyze the performance benefits of broadband ATM networks when the call control and management flows are separated from user data flows. The virtual path tunneling concept for control and management flows are applied to the same physical ATM networks. The behaviors of channel throughput and transfer delay are analyzed. It results that the proposed virtual short-cut paths can maintain the network being stable with acceptable bandwidth. They are very useful to provide the stable control and management capabilities for Internet and mobile applications in the broadband ATM networks. In our numerical results, the effective throughputs of the proposed virtual shout-ut channel are about three times than those of end-to-end user data channels with hop distances of 10, and about two times than those with hop distance of 5 when the link blocking probability increases to 0.1. It concludes that the effective channel bandwidth are greatly reduced down while physical links are not stable and user traffic flows are occasionally overflowed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1391-1400
• /
• 2008

In recent yeats, SCTP is known as the next transport layer protocol for connection-oriented and reliable data transfer after TCP/UDP. The SCTP was developed on the basis of the existing TCP and was designed to eliminate defects of TCP. SCTP has the different characteristic of multi-streaming and multi-homing from TCP. In this paper, we studied the defects of the performance of communication using the traits of multi-homing. And we evaluated the efficiency for each application services on the basis of SCTP of IPv6. Also, we analysed the delay time of a packet using SCTP and TCP. We noticed that the efficiency of SCTP is better than that of TCP.

• Journal of Digital Contents Society
• /
• v.3 no.1
• /
• pp.47-57
• /
• 2002

Recently, wireless networks have been pursuing multimedia data service as voice, data, image, video and various form of data according to development of information communication technology. It guarantees cell delivery delay of real time data in efficient real time multimedia data transfer. Also, it minimizes cell loss rate of non-real time multimedia data. In the wireless ATM, there are based on Asynchronous Transfer Mode(ATM). It implies that there are various service with difficult transmission rates and qualities in the wireless communication network. As a result, it is important to find out the ways to guarantee the Quality of Service(QoS) for each kind of traffic in wireless network. In this thesis, we propose an improved TCRM scheduling algorithms for transmission real-time multimedia data service in wireless ATM Networks. We appear real time multimedia scheduling policy that apply each different method to uplink and downlik to wireless ATM network. It can guarantee QoS requirements for each real time data and non-real time data. It also deals the fairness problem for sharing the scarce wireless resources. We solve fault of TCRM as inefficient problem of non-real data by using arbitrary transmission speed and RB(Reservation Buffer) through VC(Virtual Control) and BS(Base Station).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.497-500
• /
• 2010

Wireless sensor network is the system for data collection and data process between many nodes. For this work, Synchronization of operation execution and ordering many events are needed. Reference the external time information is the most accurate way to have same time information for all nodes but it's hard to apply these to sensor network. So there are many study of time synchronization there are many error occurred when the time synchronization is executed in the sensor network and minimizing these errors is important. In this paper, we propose how to minimize errors using several time stamp information exchanging when the network is initialized. When the big difference is occurred between receive time and send time in the node communication(cause of traffic overhead and etc), it shows big error of time correction and transfer delay time. but it's hard to detect these errors when it exchanges time stamp information just one time. so we try to reduce these errors using the median value of transfer delay and time correction value with many times of time stamp information exchange.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.179-189
• /
• 2000

Recently, due to the increasing interests in deep sea development, all possible efforts to the development of underwater unmanned working vehicles such as AUV(Autonomous Underwater Vehicle) or underwater robot are exerted. This paper proposes a new efficient acoustic-based underwater image data communication system, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allowsfast data transmission through the multiple ultrasonic communication channel. Proposed system consists of an acoustic transducer which operates at 136kHz center frequency and it's 10kHz bandwidth, pre-amplifier, $\pi/4 QPSK$(Quadrature Phase Shift Keying) modulation/demodu-lation method, image compressing method using JPEG technique and modified Stop & Wait protocol. The experimental result of the system make it possible to transfer the underwater image as a high throughput at the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation in the water.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2017

Recent researches on radio frequency energy harvesting networks(RF-EHNs) with limited energy resource like battery have been focusing on the development of a new scheme that can effectively extend the whole lifetime of a network to semipermanent. In order for considerable increase both in the amount of energy obtained from radio frequency energy harvesting and its charging effectiveness, it is very important to design a network that supports energy harvesting and data transfer simultaneously with the full consideration of various characteristics affecting the performance of a RF-EHN. In this paper, we proposes an interference-based charging aware routing protocol(ICARP) that utilizes interference information and charging time to maximize the amount of energy harvesting and to minimize the end-to-end delay from a source to the given destination node. To accomplish the research objectives, this paper gives a design of ICARP adopting new network metrics such as interference information and charging time to minimize end-to-end delay in energy harvesting wireless networks. The proposed method enables a RF-EHN to reduce the number of packet losses and retransmissions significantly for better energy consumption. Finally, simulation results show that the network performance in the aspects of packet transmission rate and end-to-end delay has enhanced with the comparison of existing routing protocols.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.456-467
• /
• 2016

Wireless Access in Vehicular Environments (WAVE) communication technology, which provides vehicleto-vehicle and vehicle-to-infrastructure communication and offers safe and convenient service, has been developed for application to an Intelligent Transport System (ITS). This paper provides field test results on a study of the feasibility of WAVE technology application to railway communication systems. A test railway communication system based on WAVE technology has been built along the Daebul line and a newly developed EMU. Field tests have been carried out according to the communication function requirements for LTE - R. The test results show that the railway communication system based on WAVE technology meets the functional requirements: maximum transmission length is 730m, maximum transfer delay is 5.69ms, and maximum interruption time is 1.36s; other tests including throughput test, video data transmission test, VoIP data test, and channel switching test also produced results that meets the functional requirements. These results suggest that WAVE technology can be applied to the railway communication system, enabling Vehicle-to-Wayside communication.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.45-49
• /
• 2016

The performance of underwater acoustic communication systems is sensitive to inter-symbol interference caused by delay spread developed from multipath signal propagation. The multipath nature of underwater channels causes signal distortion and error floor. In order to improve the performance, it is necessary to employ an iterative coding scheme. Of the various iterative coding schemes, turbo code and convolutional code based on the BCJR algorithm have recently dominated this application. In this study, the performance of iterative codes based on turbo equalizers with equivalent coding rates and similar code word lengths were analyzed. Underwater acoustic communication system experiments using these two coding techniques were conducted on Kyeong-chun Lake in Munkyeong City. The distance between the transmitter and receiver was 400 m, and the data transfer rate was 1 Kbps. The experimental results revealed that the performance of turbo codes is better for channeling than that of convolutional codes that use a BCJR decoding algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.307-312
• /
• 2000

Asynchronous transfer mode(ATM) is flexible to support the various multimedia communication services such as data, voice, and image by applying asynchronous time-sharing and statistical multiplexing techniques to the existing data communication. ATM service is categorized to CBR, VBR, UBR, and ABR according to characteristics of the traffic and a required service qualities. Among them, ABR service guarantees a minimal bandwidth and can transmit cells at a maximum transmission rate within the available bandwidth. To minimize the cell losses in transmission and switching, a feedback information in ATM network is used to control the traffic. In this paper, predictive control algorithms are proposed for the feedback information. When the feedback information takes a long propagation delay to the backward nodes, ATM switch can experience a congestion situation from the queue length increases, and a high queue length fluctuations in time. The control algorithms proposed in this paper provides predictive control model using slop changes of the queue length function and previous data of the queue lengths. Simulation shows the effectiveness result of the proposed control algorithms.