• Title/Summary/Keyword: communication structure

Search Result 4,633, Processing Time 0.035 seconds

A Conceptual Framework for Comprehending the Spatial and Communication Layers in R & D Laboratories

  • Yoo, Uoo Sang
    • Architectural research
    • /
    • v.7 no.2
    • /
    • pp.35-45
    • /
    • 2005
  • This study discusses "mechanisms" in a research facility, specifically focusing on the question of how we can understand what happens in the physical environment and the communication between researchers. This study attempts to address this question by examining two physical settings, before and after the move of one research-educational facility, the Institute of Paper Science and Technology. The objective of the study is to suggest conceptual models to comprehend the relationships between spatial layouts and communication. The study examines the underlying mechanism of how the levels of communication meet the layers of spatial structure. The paper has four parts. First, the preceding studies will be reviewed evoking some issues of communication and physical setting in research facilities. Second a conceptual typology in office plan will be developed providing a theoretical framework to review the spatial organization of the subject research facility, the Institute of Paper Science and Technology (IPST). Third, the spatial organization of the former building (before the move) and the present building (after the move) of IPST will be analyzed. Finally, conceptual models of the mechanism between the communication and the spatial organization will be drawn up.

Plasma damage of MIS(TaN/$HfO_2$/Si) capacitor using antenna structure (Antenna structure를 이용한 MIS(TaN/$HfO_2$/Si) capacitor의 plasma damage 연구)

  • Yang, Seung-Kook;Lee, Seung-Yong;Yu, Han-Suk;Kim, Han-Hyung;Song, Ho-Young;Lee, Jong-Geun;Park, Se-Geun
    • Proceedings of the IEEK Conference
    • /
    • 2006.06a
    • /
    • pp.551-552
    • /
    • 2006
  • Plasma-induced charging damage was been measured during TaN gate electrode of MISFET(TaN/$HfO_2$/Si) or interconnection metal etching step using large antenna structures. The results of these experiments were obtained that $HfO_2$ gate dielectric layer was affected about plasma charging effects and damage increased with F-N tunneling. Therefore, the etching conditions should be optimized to avoid the defects caused by plasma charging.

  • PDF

Analysis of Wireless Signal Strength in Indoor Environment with Film-Type Dual-Band Frequency Selective Structure (필름형 이중 대역 주파수 선택 구조가 적용된 실내 환경의 무선신호강도 분석)

  • Cho, Sung-Sil;Lee, Sang-Hwa;Yoon, Sun-Hong;Hong, Ic-Pyo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.29 no.1
    • /
    • pp.1-9
    • /
    • 2018
  • In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.

Intelligent Hybrid Modular Architecture for Multi Agent System

  • Lee, Dong-Hun;Baek, Seung-Min;Kuc, Tae-Yong;Chung, Chae-Wook
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2004.08a
    • /
    • pp.896-902
    • /
    • 2004
  • The purpose of the study of multi-robot system is to realize multi-robot system easy for the control of robot system in case robot is adapted in the complicated environment of task structure. The purpose of the study of multi-robot system is to realize multi-robot system easy for the control of robot system in case robot is adapted in the complicated environment of task structure. To make real time control possible by making effective use of recognized information in this dynamic environment, suitable distribution of tasks should be made in consideration of function and role of each performing robots. In this paper, IHMA (Intelligent Hybrid Modular Architecture) of Intelligent combined control architecture which utilizes the merits of deliberative and reactive controllers will be suggested and its efficiency will be evaluated through the adaptation of control architecture to representative multi-robot system.

  • PDF

A Design of Distributed Multimedia Database Communication Protocol for Highspeed Multimedia Terminal (초고속 멀티미디어 단말기를 위한 분산 멀티미디어 데이터베이스 전송 프로토콜 설계)

  • 두길수;박정희;이신원;윤후병;김법균;황호전;안동언;정성종
    • Proceedings of the IEEK Conference
    • /
    • 1999.11a
    • /
    • pp.795-798
    • /
    • 1999
  • To transmit multimedia information efficiently and use it in realtime, it needs a private multimedia terminal for service type. But multimedia information terminal was developped for of offered service type in case by case. Accordingly, general multimedia terminal have not been developed yet. Multimedia database structure and standard communication protocol must be designed first to develop the general multimedia terminal. Multimedia database structure needs to store the various multimedia information consistently and, standard communication protocol access the database transparently. In this paper, we design a multimedia database structure and communication protocol that are able to access the multimedia information on distributed database servers in the network.

  • PDF

Design of an Input-Parallel Output-Parallel Multi-Module DC-DC Converter Using a Ring Communication Structure

  • Hu, Tao;Khan, Muhammad Mansoor;Xu, Kai;Zhou, Lixin;Rana, Ahmad
    • Journal of Power Electronics
    • /
    • v.15 no.4
    • /
    • pp.886-898
    • /
    • 2015
  • The design feasibility of a micro unidirectional DC transmission system based on an input-parallel output-parallel (IPOP) converter is analyzed in this paper. The system consists of two subsystems: an input-parallel output-series (IPOS) subsystem to step up the DC link voltage, and an input-series output-parallel (ISOP) subsystem to step down the output voltage. The two systems are connected through a transmission line. The challenge of the delay caused by the communication in the control system is addressed by introducing a ring communication structure, and its influence on the control system is analyzed to ensure the feasibility and required performance of the converter system under practical circumstances. Simulation and experiment results are presented to verify the effectiveness of the proposed design.

A wideband balun of tapered structure using planar microstrip

  • Chang, Tae-Soon;Chang, Rae-Kim;Hur, Jung
    • Proceedings of the Korea Society of Information Technology Applications Conference
    • /
    • 2005.11a
    • /
    • pp.35-38
    • /
    • 2005
  • In this paper, a wideband balun of tapered structure using planar microstrip is desigde ad analyzed. The balun structure was fabricated on a Teflon substrate with a thickness of 0.8mm and relative dielectric constant ${\varepsilon}_r$ of 2.5. Two back-to back CPW-to-CPS transitions were simulated and optimized using HFSS. A movel plaar balun using tapered structure of microstip to CPW is suggested and designed. The measurement result, the bandwidth for a reflection coefficient better than -10dB of the balun is 2GHz to 8GHz. The planar balun can improved the performance of wide band spiral antenna.

  • PDF

Bending Fatigue Characteristics of Surface-Antenna-Structure (복합재료 표면안테나 구조의 굽힘 피로특성 연구)

  • 김동현;황운봉;박현철;박위상
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2003.06a
    • /
    • pp.1647-1650
    • /
    • 2003
  • The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was 16${\times}$8 array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue lift curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

  • PDF

Slotted Implantable Patch Antenna for ISM Band Application and Its Usage in WiMAX with an I-Shaped Defected Ground Structure

  • Ayubi, Adil Al;Sukhija, Shikha;Sarin, Rakesh Kumar
    • Transactions on Electrical and Electronic Materials
    • /
    • v.18 no.6
    • /
    • pp.359-363
    • /
    • 2017
  • A slotted implantable patch antenna with microstrip feeding is proposed for industrial, scientific, and medical band applications. The result is verified by implanting the antenna in animal tissue. Further, by varying the ground width and introducing a defect into the ground structure, the antenna becomes applicable for worldwide interoperability for microwave access operations. A simulation is performed using Empire XCcel software. An Agilent vector network analyzer is used for analyzing the return loss performance. Simulated and measured results are compared. Antennas with and without defected ground structure both have key advantages including low profile, desirable return loss, good impedance matching and required bandwidth.

Bending Fatigue Characteristics of Surface-Antenna-Structure (복합재료 표면안테나 구조의 굽힘 피로특성 연구)

  • 김동현;황운봉;박현철;박위상
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2003.04a
    • /
    • pp.108-111
    • /
    • 2003
  • The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was $16\;{\times}\;8$ array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

  • PDF