• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1406-1409
• /
• 2016

In this paper, we propose the heuristic signal grouping algorithm to estimate channel state value over full blind communication situation which means that there is no information about the modulation scheme and the channel state information between the transmitter and the receiver. Hereafter, using the constellation rotation method and the probability density function(pdf) the modulation scheme is determined to perform automatic modulation classification(AMC). Furthermore, the modulation type and a channel state value estimation capability is evaluated by comparing the proposed scheme with other conventional techniques from the simulation results in terms of the symbol error rate(SER) and the root mean square error (RMSE).

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.15-32
• /
• 2011

In printing, managing color means that how closely its color reproducts and printing supplier meets customers' requirements. When applying device profiles, it depends on properties of the devices. But color management of domestic digital prints is accomplished more scientifically and objectively than any other printing. According to this paper addresses a method of evaluating between proof prints and offset prints which are produced by identical date on the field. We evaluate two cases normal proof prints and domestic offset prints based on standardized color data analysis and subjective data analysis. We gathered objective data by measuring solid density, $CIEL^*a^*b^*$ and ${\Delta}E^{*_}{ab}$. Furthermore, we evaluated the offset prints and proof prints through human eyes to decide the ranking.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.46-51
• /
• 2004

The cause for the variation of the initial permeability according to the Co substitution of Ni-Zn ferrite used in the LC resonance filter for the power line communication is studied. The initial permeability decreases as the quantity of Co diminishes, and the saturation magnetization increases as the quantity increases. Because the sintering density and the microstructure of ferrite show little change, the variation of the initial permeability can't be explained by the density, microstructure nor the saturation magnetization factor. The magnetocrystalline anisotropy increases, similar with the saturation magnetization, as the quantity of Co increases. The increase of magnetocrystalline anisotropy value makes the domain wall energy grow, which leads to the decrease of the initial permeability, because there's linear law between the magnetocrystalline anisotropy and the domain wall energy. The resonance frequency to Co substitution moved to high frequency band, due to the close relationship with domain wall energy, Initial permeability decreaed a little with an increase of Co contents, but resonace frequency moved to high frequency band. as a result of that, when Co was added 0.05 mol, initial permeability and resonace frequency was 75 and 25 MHz respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.569-574
• /
• 2017

In order to transmit information in a channel environment in which noise exists, a coding technique of information is required. One of the coding techniques used for error detection and correction close to the Shannon limit is Low Density Parity Code(LDPC). LDPC and decoding characteristic features by Sum-product algorithm are matched for the performance to Turbo Code, RA(Repeat Accumulate) code, in case of very long code length of LDPC surpass their performance. This paper explains LDPC coding scheme of image data and decoding scheme, implements LDPC decoder in FPGA.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.72-79
• /
• 2014

This paper presents a method for constructing a pipeline-aware quasi-cyclic irregular repeat accumulate low-density parity-check (PA-QC-IRA-LDPC) codes and efficient rate-1/2 (2016, 1008) PA-QC-IRA-LDPC decoder architecture. A novel pipeline scheduling method is proposed. The proposed methods efficiently reduce the critical path using pipeline without any bit error rate (BER) degradation. The proposed pipeline-aware LDPC decoder provides a significant improvement in terms of throughput, hardware efficiency, and energy efficiency. Synthesis and layout of the proposed architecture is performed using 90-nm CMOS standard cell technology. The proposed architecture shows more than 53% improvement of area efficiency and much better energy efficiency compared to the previously reported architectures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1839-1844
• /
• 2015

The low-density parity-check(LDPC) code has been adopted in many communication standards due to its error correcting performance, and the quasi-cyclic LDPC(QC-LDPC) is widely used because of implementation easiness. In the QC-LDPC decoder, a cyclic-shifter is required to rotate data in various sizes. This kind of cyclic-shifters are called multi-size circular shifter(MSCS), and this paper proposes a low-complexity structure for MSCS. In the conventional serially-placed two barrel-rotators, the unnecessary multiplexers are revealed and removed, leading to low-complexity. The experimental results show that the area is reduced by about 12%.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.1
• /
• pp.13-22
• /
• 2006

We investigated the effects of the enzyme treatment of fiber for printability of coated paper. The results could summarized as follows, 1. The samples with enzyme treatment (average 87.8%) have higher ink gloss than the blank (85.6%). Printed density showed same trends with the ink gloss. However, the ${\beta}$-Glucosidase treated sample showed the lowest printed density (2.14 %) due to the lowest thickness of the ink layer, which is influenced by coated weight and surface smoothness. 2. The samples whose base paper was Xylanase and ${\beta}$-Glucosidase treated showed higher surface strength (4.2% and 4.0%, respectively) than the blank while the samples with the Hernicellulase and ${\beta}$-Glucuronidase treatment showed lower surface strength (3.2%and 3.7%, respectively) due to the influence of air permeability. 3. Hemicellulase and ${\beta}$-Glucuronidase treated base paper, which have relatively low air permeability, showed better ink repellence (4.3 and 4.4 %, respectively) than the blank (3.8 %). 4. The blank and the Xylanase treated base paper showed high set-off, which is the last category of printability.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.31-44
• /
• 2010

Ever since the introduction of offset lithography, an operator have looked for ways to improve the process by reducing need for dampening solution. Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for lithography printing must work with dampening solution. The dampening solution may cause the emulsification of ink by the printing pressure in the printing nip. Emulsified ink changed viscosity, tack and causes problems such as bad transfer, uniform density and printed mottle. For a high quality web printing, we studied the effect of emulsified heat-set web inks on the printability, such as amount of ink transfer, printed density and uniformity. For this study, we were carried out by using IGT printability tester C1. For determination of ink properties using the spread meter and Thwing Albert Ink-o-meter, and using the densitometer and image analysis for printed quality determination. The experimental results of this study, we look forward to can be used as the basis for improve of the web print quality.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.477-484
• /
• 2021

The 4kW class inverter for portable ESS designed through this study achieves lightweight and high power density by reducing the volume of passive devices (capacitors, inductors, etc.) suitable for portable use, and minimizes heat loss of the MOSFET through the low on resistance of the MOSFET. So that high efficiency can be achieved. In addition, in order to deliver high quality energy, it is designed to have a low THDV in accordance with the current KEPCO business handling guidelines, and is designed to output a sine wave with low distortion.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.73-81
• /
• 2023

Globalized cities are currently showing changes due to autonomous driving (AD). It is also maximizing globalization connections in cities where autonomous mobility is as complex as AD. The purpose of this study is to reveal that cities that realize AD and mobility will grow into globalized cities. Several cities, including New York and Shanghai, have attempted and are in progress, but failed cities are increasing. Although the technology of AD and the trust of citizens are prioritized, the city that has built the city's infrastructure is expected to be a city that has succeeded in AD. This is because commercialized cities or AVs will become hubs for mobility globalization, excluding rapid climate change or AV companies, and empirical analysis has been conducted that if AVs fail in metropolitan New York due to urban complexity (population density), urban economy size (GRDP), patents, number of consumers, infrastructure public EV chargers, and road quality. It examines whether the realization of AD by region and country affects overall national innovation. As a result, even if AV succeeds in large cities such as New York, Seoul, which has a higher population density (complexity), has a negative meaning, and a more similar Tokyo has a positive meaning. It can be seen that regional research on AV should also be prioritized in large cities such as Shanghai. This means that in order for AV to be realized in each city, the construction of AI infrastructure data must be actively changed to establish globalization of cities for economic growth as autonomous mobility.