• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.288-298
• /
• 2015

For the commercialization of unmanned aircraft, we must validate the safety of the air/ground collision alert systems (CAS). The validation procedure of CAS requires the flight test which is not only expensive but also dangerous. To alleviate this problem, we need the simulation based validation process for the CAS. We developed an integrated UAV simulation (IUS) environment which interconnect the flight simulator, the Matlab/Simulink, and a target avionics simulation model. We developed the collision warning module of the TCAS and tested using IUS and flight encounter models. Using IUS, we can evaluate the performance and reliability of a target avionic system at the preliminary design stage of a development life cycle.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.221-252
• /
• 2010

This study presents a concept of technology trade network and management, and proposes a procedural method for optimally selecting the technology transferor when a technology transferee needs to buy a specific technology. We develop a technology trade network where technology supplier, technology marketer, and technology transferee are informatively linked. And a technology trade management consists of three step of estimating technology, trading technology, and commercialization technology. Technology transferees could import the best appropriate technology which they want through these technology network method and cost optimization method. And we hope that these methodologies can be used in selecting new technology. A methodology can be classified into an estimating technology process and a choice of technology supplier process. In an estimating technology process, we calculate the technology similarity quantitatively through developing method of estimating technology which is focused on its technological characteristics. After defining the related cost of technology introduction, we suggest goal programming model to find a solution which can be acceptable both maximizing the technology similarity and minimizing the cost of technology. And suggested model is verified with a supplier selection problem of next generation tanks.

• Journal of Technology Innovation
• /
• v.20 no.2
• /
• pp.75-107
• /
• 2012

Previous researches on technological innovation have several limitations such as lack of general mechanism for technological innovation(inputs, throughputs and outputs of technological innovation), large company oriented studies, and ignoring importance of technology management capabilities. So, this study suggested a new model using resource-based theory and system theory, and empirically applied that to SMEs. Structural equation model analysis by using 223 SMEs in Daegu region provided a support for most of hypotheses. Research results showed that all of factors on technological innovation were significantly and positively related with each other: inputs(R&D leadership, innovation strategy, R&D investment, R&D human resource management, external network), throughputs(portfolio management, project management, technology commercialization) and output(technological innovation). In case of technological innovation inputs, R&D leadership influenced on innovation strategy positively and significantly. And R&D leadership and innovation strategy had positive and significant effects on R&D investment, R&D human resource management and external network. R&D human resource management and external network exerted positive and significant influences on technological innovation throughputs such as portfolio management and project management. But R&D investment did not significant impacts on technological innovation throughputs. Among technological innovation throughputs, both portfolio management and project management had positive and significant effect on technology commercialization. In addition, technology commercialization acted positively and significantly technological innovation output. This study suggests necessary of efforts to implement innovation strategy and manage R&D human resource effectively based on CEO's innovativeness and entrepreneurship. Also, if SMEs want to develop technology and commercialize it, they have to cooperate with external technology resources and informations. Research results revealed that proper level of R&D investment, internal and external communication, information sharing, and learning and cooperative culture were very important for improvement of technological innovation performance in SMEs. Especially, this research suggested that if SMEs manage technological innovation process effectively based on resource-based and system approaches, then they can overcome their resource limitations and gain high technological innovation performance. Also, useful policy support for technological innovation of central or regional government by this research model is important factor for SMEs' technological innovation performance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.141-148
• /
• 2015

The cryogenic cooling system should maintain the HTS power cable below 77 K. As the length of HTS power cables has increased, there have been many efforts to develop large capacity cryocoolers. Brayton, Joule-Thomson, and Claude refrigerators were considered for the large capacity cryocooler. Among the various cryocoolers, the Brayton refrigerator is the most competitive in terms of the HTS power cable. At present, it is thought that a 10-kW class refrigerator will be able to be used as a unit cooling system for the commercialization of HTS power cables in the near future. The Brayton refrigerator is composed of recuperative heat exchangers, a compressor, and a cryogenic turbo expander. Among the various components, the cryogenic turbo expander is the part that decreases the temperature, and it is the most significant component that is closely related with overall system efficiency. It rotates at high speed using high-pressure helium or neon gas at cryogenic temperatures. This paper describes the design of a 300-W class Brayton refrigeration cycle and the cryogenic turbo expander as a downscale model for the practical 10-kW class cycle. Flow and structural analyses are performed on the rotating impeller and nozzle to verify the efficiency and the design performance.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.20-28
• /
• 2020

In this study, the damage impact range in the case of a hydrofluoric acid leak accident was predicted using formula calculation, impact assessment simulations, and CFD simulations, and the results were compared and analyzed with the actual environmental impact report. Formula calculation was performed by using the leak source model and diffusion model. Impact assessment simulation was performed by KORA provided by the Korean Ministry of Environment, ALOHA by the United States Ministry of Environment, and PHAST, which is relatively widely used among commercialization programs, and the STAD-CMM+program for CFD simulation. Was utilized. Considering convenience, speed, acceptability, and economics from the user's perspective, ALOHA and KORA were the most appropriate methods for predicting the impact of hydrofluoric acid leakage. In addition, the results of this study will help to reduce unnecessary regulations in the process of government policy development and optimize the investment in the safety field of the company, effectively utilizing the limited resources of the government and the company.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.674-682
• /
• 2015

RnD Service firms are the innovative company that supports innovation, determines the healthy ecosystem in the high tech business sector. RnD service also brings up a regional innovation through the business ecosystem. This study conducted a case study RnD Service firms leading to the activation of high tech industry. We analyze the role of the RnD Service firms through reports and interviews with corporate managers. We understand the growth process was RnD Service firms, and identify the cost of organizing. RnD Service firms are independent economy, but was also a problem that appears is dependent on universities and research institutions sometimes. When the subject of a regional innovation take place the RnD Service sector, It should be noted that the emergence of innovative business. RnD Service model should not be developed by universities and public institutions, it should be a technology development model that occur between companies.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.81-82
• /
• 2010

Emerging global economic growth and increasing demand for energy supply and demand imbalance and the excessive use of fossil fuels existing the rapidly increasing greenhouse gas emissions and resource depletion of global energy crisis is deepening. Accordingly, improvement of living conditions around and through the natural ecological preservation and the need for a comfortable life for the meeting the importance of energy management and consumption are emerging. Many in the field of architecture for energy-saving measures, and conducting research and verify green building energy ratings and low energy for the initial steps that can be verified from the Energy Performance of BIM(Building Information Model) technology development and commercialization of the building energy to predict the performance objectively, leverages technology in an existing building energy performance analysis and possibilities of BIM-based green building process presented. In this study, using BIM for existing building energy performance analysis of data collected through the objective and efficient management of the energy it consumes Mapping and Management Plan is to research on.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.2 s.2
• /
• pp.81-98
• /
• 1999

The purpose of this study is to provide a common model and implementation strategies for reusing GIS components in local governments. The common model includes several solutions to remove stumbling blocks step by step in reusing or exchanging GIS application systems between local governments. Elements of the model are component architecture, common business process model, common function model, and data model. The elements are the minimum standards for reusability. In order to realize the desirable common model at present, however, the following problems remain : usable components are insufficient in spatial domains and existing GIS application systems require reinvestment to accommodate the new component technology. Three questions are raised to maximize reusability from a monolithic structure toward layered and the componentized GIS application systems : (1) How can the application systems be reused within a local government?, (2) Can the systems be exchanged when they are in the same computing platform?, and (3) When the systems are componentized by standardized interfaces, are the components replaceable between the systems in local governments? Some strategies are presented to accomplish the objectives implicated in the questions. For the actual implementation, several issues such as evaluation procedures for component products, ownership and commercialization issues, will be brought up in the future. Central and local governments, and commercial party need to co-operate each other to maximize the reusability. Reducing overlapping investments in local governments and obtaining competitive component technology in the commercial party should be recognized as critical tasks for the more efficient and economical GIS implementation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.67-80
• /
• 2020

This study has been conducted at a time when Korean government continues to extend support for youth startups as part of its policy to create jobs and the focus moves from career and employment to youth startups with a growing interest in the field of youth startups. Against this background, this study aims to identify difficulty factors of youth startups in areas besides the Seoul Metropolitan Area, seek ways to overcome difficulty factors, and propose policy implications. To this end, this study set five criteria and 25 sub-criteria to evaluate the difficulties of youth startups by reviewing previous studies and conducting literature review, and performing brainstorming method. The empirical analysis of the evaluation criteria was performed, using the analytic hierarchy process (AHP) method, on youths aged 19 to 39 in Gunsan area. The analysis results showed that the largest difficulty factors facing local youths include business model establishment, business administration and management, and startup funding in the criteria. As for sub-criteria, the largest difficulty factors are market information acquisition, technology commercialization, project feasibility, technology development, and new market pioneering in descending order. Local youths have much difficulty about the process of turning a business item into a product and commercializing it. According to a comparative analysis by gender, men were a relatively high difficulty in commercializing business models than women. men were a relatively high difficulty in commercializing business models than women. On the other hand, women were higher than men in all factors (management management, entrepreneurship, improvement of entrepreneurship system, and improvement of entrepreneurship awareness) except for factors affecting business model. In addition, the factors of entrepreneurship were found to be relatively different among young people (college students, prospective entrepreneurs, entrepreneurs). In conclusion, it was suggested that in order to revitalize youth entrepreneurship in the region, it is necessary to actively resolve the difficulties of business model commercialization rather than entrepreneurship funds. In addition, it is necessary to strategically support customized entrepreneurship support and situational administrative services because gender and hierarchical difficulties are different than general solutions. This study presented practical priorities and derivation methods for the entrepreneurship difficulties faced by local youth, and suggested measures and improvements for vitalizing local youth entrepreneurship in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.192-207
• /
• 2023

Commercialization of level-4 (Lv.4) autonomous driving applications requires the definition of a safe road environment under which autonomous vehicles can operate safely. Thus, a risk assessment model is required to determine whether the operation of autonomous vehicles can provide safety to is sufficiently prepared for future real-life traffic problems. Although the risk factors of autonomous vehicles were selected and graded, the decision-making method was applied as qualitative data using a survey of experts in the field of autonomous driving due to the cause of the accident and difficulty in obtaining autonomous driving data. The fuzzy linguistic representation of decision-makers and the fuzzy analytic hierarchy process (AHP), which converts uncertainty into quantitative figures, were implemented to compensate for the AHP shortcomings of the multi-standard decision-making technique. Through the process of deriving the weights of the upper and lower attributes, the road alignment, which is a physical infrastructure, was analyzed as the most important risk factor in the operation risk of autonomous vehicles. In addition, the operation risk of autonomous vehicles was derived through the example of the risk of operating autonomous vehicles for the 5 areas to be evaluated.