• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2002

A Hotchkiss spring has been widely utilized for commercial vehicle. Usually, the Hotchkiss spring has non-linear characteristics, i.e. it has a piecewise spring stiffness as well as hysterisis phenomenon. Therefore, the modeling of the Hotchkiss spring requires many considerations to fulfill satisfactory vehicle kinematic and dynamic relationships. Also, the spring has difficulties in modeling for presenting contact mechanism. In this paper, the modeling technique for the Hotchkiss spring has been descried. The modeling covers non-linear characteristics as well as contact problems for multi-body dynamic simulation. The force-displacement results are compared with experimental and FEM ones. Also, the comparison between three link type leaf spring model and proposed one has been considered in this paper.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.55-62
• /
• 2000

The status of the maglev development in Korea is reported along with related commercial application prospects. The 1st test vehicle, Urban Transit Maglev-01, is in the running tests, and is now entered a new phase in which a new vehicle be built within 3 years. Eventhough Korean maglev teams made remarkable progress for 10 years since 1990, major portion of the works to prove safety and reliability remains for the future. Many LRT routes are being planned by the Korean government and UTM will find its commercial application if we can prove many merits of the maglev system plus its reliability. But the commercial application efforts did not produce any outcome at the time because the customer wasn't totally satisfied with the new system and also, they decided it wasn't urgently needed.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.290-291
• /
• 2017

This study deals with an evaluation method for testing the robustness of the 4 kW commercial power electronic cooling system to the thermal environment. The power electronic cooling system consists of a cascaded push-pull DC / DC converter, a three-phase DC / AC inverter, and an electric compressor. The system manufactured by the thermal environment evaluation test (heat distribution test, thermal impact test, high temperature operation test, temperature cycle test, low temperature operation test) for the commercial electric power cooling system for commercial vehicle proves that it is robust against thermal environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.359-360
• /
• 2013

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.31-37
• /
• 2001

In this paper, a method to improve judder by changing the front and rear wheel brake force distribution ratio was proposed. ADAMS, a commercial dynamic analysis software was used to model a small size bus and its modeling procedure was explained. By using the ADAMS vehicle model, the judder phenomena of the small bus were analyzed, and based on analysis results, the validity of the improvement method was proposed. Also in order to lessen the problem jubber sensitivity analysis and test results were proposed.

• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.395-402
• /
• 1995

In general low frequency vibration characteristics like an idleshake is mainly influeced by pillar section properties and joints. So the design technique development of vehicle pillar structures is required to initial design and vehicle development stage. In this paper to develop pillar structure design technique considering low frequency vibration characteristics, strain energy method, design sensitivity analysis method, and design optimization method using commercial finite element analysis program and optimization program are presented.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.9-15
• /
• 2014

In the ubiquitous computing environment, a ubiquitous vehicle will be a communication node in the vehicular network as well as the means of ground transportation. It will make humans and vehicles seamlessly and remotely connected. Especially, one of the prominent services in the ubiquitous vehicle is the vehicle remote operation. However, mutual-collaboration with the in-vehicle communication network, the vehicle-to-vehicle communication network and the vehicle-to-roadside communication network is required to provide vehicle remote operation services. In this paper, an Internet-based human-vehicle interfaces and a network architecture is presented to provide remote vehicle control and diagnosis services. The performance of the proposed system is evaluated through a design and implementation in terms of the round trip time taken to get a vehicle remote operation service.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.371-379
• /
• 2015

This paper represents the structural design of the light weight axle beam for medium duty commercial vehicle using hot press. To reduce the weight of the axle, axle beam of solid type was replaced by hollow type which was made by hot press. According to the change of axle beam structure and manufacturing method, we have to investigate the structural strength and fatigue performance. To verify the axle beam performance, the structural analysis was carried out by simplified axle beam model and various design parameters that are axle beam height, thickness and width. From the analysis results, the light weight axle beam structure was founded and applied the full model analysis. This study will be used as a guidance in development of the light weight axle for medium duty commercial vehicle.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.38-44
• /
• 2018

This paper presents an analysis on driving safety in lane change situation based on road driving data. Autonomous driving is a global trend in vehicle industry. LKAS technologies are already applied in commercial vehicle and researches about lane change maneuver have been actively studied. In autonomous vehicle, not only safety control issue but also imitating human driving maneuver is important. Driving data analysis in lane change situation has been usually dealt with ego vehicle information such as longitudinal acceleration, yaw rate, and steering angle. For this reason, developing safety index according to surrounding vehicle information based on human driving data is needed. In this research, driving data is collected from perception module using LIDAR, radar and RT-GPS sensors. By analyzing human driving pattern in lane change maneuver, safety index that considers both ego vehicle and surrounding vehicle state by using relative velocity and longitudinal clearance has been designed.