• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.78-80
• /
• 2014

Silicone structural glazing (SSG) is a method utilizing a silicone adhesive to attach glass, metal, or other panel material to the structure of a building. Windload and other impact loads on the facade are transferred from the glass or panel through the silicone structural sealant to the systems' framework. Silicone structural glazing systems are currently a very common method of glazing throughout the world. Locally, structural silicone glazing has become very common to achieve aesthetically pleasing and high utilization of small land for both residential and commercial building. Although structural silicone glazing has been utilized for approximately thirty years in Korea, the understanding of its technology was low and limited. Consequently, Korean projects experienced many quality issues during assembly and construction, even in very recently finished buildings. Adhesion loss and water infiltration occurred on more than one project, and the time and cost to repair these issues were substantial. In general, there are two kinds of structural silicones depending on fabrication methods. 1part structural silicone is for site glazing system and 2part structural silicone is for unitized factory glazing system. In this paper, 2part structural silicone which is very common for factory fabricating curtainwall systems was evaluated with regards to various mixing ratio. Since the structural performance of 2part sealant can be affected by mixing ratios, some extra ranges of recommended mixing ratio were evaluated to see any performance differences. Besides on cure profile, comparative evaluations for mechanical properties and adhesion develop on common building substrates were conducted.

• 농업과학연구
• /
• 제38권4호
• /
• pp.747-752
• /
• 2011

Wireless technology has enabled farmers monitor and control protected production environment more efficiently. Utilization of USN (Ubiquitous Sensor Network) devices also brought benefits due to reduced wiring and central data handling requirements. However, wireless communication loses signal under unfavorable conditions (e.g., blocked signal path, low signal intensity). In this paper, performance of commercial wireless communication devices were evaluated for application to protected crop production. Two different models of wireless communication devices were tested. Sensors used in the study were weather units installed outside and top of a greenhouse (wind velocity and direction, precipitation, temperature and humidity), inside ambient condition units (temperature, humidity, $CO_2$, and light intensity), and irrigation status units (irrigation flow and pressure, and soil water content). Performance of wireless communication was evaluated with and without crop. For a 2.4 GHz device, communication distance was decreased by about 10% when crops were present between the transmitting and receiving antennas installed on the ground, and the best performance was obtained when the antennas were installed 2 m above the crop canopy. When tested in a greenhouse, center of a greenhouse was chosen as the location of receiving antenna. The results would provide information useful for implementation of wireless environment monitoring system for protected crop production using USN devices.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3049-3052
• /
• 2008

MCFC(molten carbonate fuel cell) power generation system is prime candidate for the utilization of fossil based fuels to generate ultra clean power with a high efficiency. In the MCFC power plant system, a combustor performs a role to supply high temperature mixture gases for cathode and heat for reformer by using the stack off-gas of the anode which includes a high concentration of $H_2O$ and $CO_2$. Since a combustor needs to be operated in a very lean condition and to avoid excessive local heating, catalytic combustor is usually used. The catalytic combustion is accomplished by the catalytic chemical reaction between fuel and oxidizer at catalyst surface, different from conventional combustion. In this study, a mathematical model for the prediction of internal flow and catalytic combustion characteristics in the catalytic combustor adopted in the MCFC power plant system is suggested by using the numerical methods. The numerical simulation models are then implemented into the commercial CFD code. After verifying result by comparing with the experimental data and calibrated kinetic parameters of catalytic combustion reaction, a numerical simulation is performed to investigate the variation of flow and combustion characteristics by changing such various parameters as inlet configuration and inlet temperature. The result show that the catalytic combustion can be effectively improved for most of the case by using the perforated plate and subsequent stable catalytic combustion is expected.

• 통상정보연구
• /
• 제14권4호
• /
• pp.563-582
• /
• 2012

SaaS모형은 정보화 H/W 투자여력이 없는 중소기업이 인터넷 기반의 모듈별 솔루션을 임대방식으로 서비스 받는 시스템이다. 많이 활용되고 있는 UPnP(Universal Plug and Play)는 정보가전이나, 무선기기, PC 등 모든 종류의 기기들을 연결하는 네트워크 구조이다. 이것은 홈이나 작은 사무실과 같이 관리자가 없는 네트워크에서 사용자의 작업 없이 쉽게 표준화된 방법으로 기기간의 연결이나 인터넷으로의 연결을 제공한다. 따라서 이러한 연결문제는 업무의 설계나 데이터베이스의 설계가 단위 네트워크별로 설계되었기 때문으로, 어떠한 업무 네트워크시스템들도 UPnP 설계시 업무를 서로 연결 할 수 있는 복합 네트워크 환경을 고려하여야 한다. UPnP 연결구조의 SaaS모형은 네트워크 기반 접속 및 실시간 관리가 가능한 상업용 소프트웨어이어야 한다. 항상 접속이 가능하고 중앙에서 관리활동이 이루어져야 한다.

• 한국수소및신에너지학회논문집
• /
• 제31권2호
• /
• pp.169-176
• /
• 2020

There is a growing interest in hydrogen energy utilization since an alternative energy development has been demanded due to the depletion of fossil fuels. Hydrogen is produced by the reforming reaction of natural gas and biogas, and the electrolysis of water. An solid oxide electrolyte cell (SOEC) is reversible system that generates hydrogen by electrolyzing the superheated steam or producing the electricity from a fuel cell by hydrogen. If the water can be converted into steam by waste heat from other processes it is more efficient for high-temperature electrolysis to convert steam directly. The reasons are based upon the more favorable thermodynamic and electrochemical kinetic conditions for the reaction. In the present study, steam at over 180℃ and 3.4 bars generated from a boiler were converted into superheated steam at over 700℃ and 3 bars using a cylindrical steam superheater as well as the waste heat of the exhaust gas at 900℃ from a solid refuse fuel combustor. Superheated steam at over 700℃ was then supplied to a high-temperature SOEC to increase the hydrogen production efficiency of water electrolysis. Computational fluid dynamics (CFD) analysis was conducted on the effects of the number of 90° elbow connector for piping, insulation types and insulation layers of pipe on the exit temperature using a commercial Fluent simulator. For two pre-heater injection method of steam inlet and ceramic wool insulation of 100 mm thickness, the highest inlet temperature of SOEC was 744℃ at 5.9 bar.

• 한국BIM학회 논문집
• /
• 제6권3호
• /
• pp.49-56
• /
• 2016

As project opportunities for the Architecture, Engineering and Construction (AEC) industry have grown more complex and larger, the utilization of Building Information Modeling (BIM) technologies for three-dimensional (3D) design and simulation practices has been increasing significantly; the typical applications of the BIM technologies include clash detection and design alternative based on 3D planning, which have been expanded over to the technology of construction management in the AEC industry for virtual design and construction. As for now, commercial BIM software has been operated under a single-user environment, which is why initial costs for its introduction are very high. Cloud computing, one of the most promising next-generation Internet technologies, enables simple Internet devices to use services and resources provided with BIM software. Recently in Korea, studies to link between BIM and cloud computing technologies have been directed toward saving costs to build BIM-related infrastructure, and providing various BIM services for small- and medium-sized enterprises (SMEs). This study addressed development of the usage metering functions of BIM software under cloud computing architecture in order to archive and use BIM data and create an optimal revenue structure so that the BIM services may grow spontaneously, considering a demand for cloud resources. For the reason, we surveyed relevant cases, and then analyzed needs and requirements from AEC industry. Based on the relevant cases, customizing for cloud BIM and design for the development was performed. We also surveyed any related-law to support cloud computing-based BIM service. Finally, we proposed herein how to optimally design and develop the usage metering functions of cloud BIM software.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1998년도 21세기 한반도 농업전망과 대책(한국작물학회.한국육종학회 공동주관 심포지움 회보)
• /
• pp.68-111
• /
• 1998

The structure of the Hanwoo (Korean Native Cattle) Industry remains very weak and vulnerable to the WTO/IMF system. Considering that the majority of cattle farmers are small sized, and that marketing systems are outdated and inefficient, rapid expansion of lower priced beef imports by WTO system and rapid increasing of production costs by IMF system would lead to the deprivation of a regular source of farm income and threaten the stability of rural life. Accordingly, the Hanwoo industry should be expanded in accordance with progress in the implementation of (1) programs for the structural adjustment and (2) measures to compensate for the loss. Efforts for lowering major production factor costs needs to continue, In order to increase the supply of calves at low cost, the programs of collective cow-calf farms should be expanded, thereby reducing the cost of calf purchase, which constitutes the largest share of Hanwoo production cost. Also, feedlot operations should be encouraged for small herd farms in order to achieve a substantial saving in beef production costs by integrated operations from calf production to cattle fattening. A substantial saving would also be made by collective purchase and distribution of various inputs through the cooperatives' channels. Extension services should be strengthened for cattle farm management, cattle care and feeding, prevention of cattle disease, etc. In order to minimize cash outlays for commercial mixed feeds, utilization of far by-products as feeds should be enhanced and production of forage crops productive of resources, such as land and rural labor, during the farm o(f-season, needs to be encouraged. Also, technological development for enhancing the nutritional value of farm by-products should be encouraged. Measures for successful segregation of the Hanwoo beef market should be implemented, thereby enhancing incentive for quality beef producers and protecting consumers willing to pay higher price for quality beef. For development of the Hanwoo industry, a considerable time frame would be required in order for (1) small livestock farmers to make a successful adjustment by staying in the enterprise and achieving increased price efficiency (2) livestock farmers to acquire know-how for producing quality Hanwoo beef, (3) the ongoing Government policy of enhancing price-quality competitiveness, and for improving the quality Hanwoo beef marketing to take root. (4) consumers to increase their ability to distinguish meat quality, and others.

• 한국식품위생안전성학회지
• /
• 제17권3호
• /
• pp.117-123
• /
• 2002

시중에 유통되고 있는 녹차중의 catechin류에 대하여 열수추출 및 HPLC분석을 통하여 함량을 조사하고 이를 효율적으로 이용하기 위하여 pH조건이 녹차 catechin류의 안정성에 미치는 영향에 대하여 분석하였다. 시판 중인 전남 보성산 녹차의 catechin류 함량은 (+)-catechin>(-)-EGCg>(-)-EGC>(-)-EC>(-)-ECg순으로 추출되었고 Total catechin류의 함량은 103.72mg/g이었다. 녹차에서 분리·정제되어진 catechin류인 (+)-catechin, (-)-EC, (-)-ECg, (-)-EGCg를 pH 3∼11에 대한 안정성을 흡광도측정장치를 이용하여 측정하였다. 그 결과 catechin류의 pH에 대한 영향을 최대흡수파장 및 흡광도 변화로 보면 pH가 높을수록 (+)-catechin과 (-)-EC은 흡광도가 증가되었고 (-)-ECg와 (-)-EGCg는 최대흡수파장이 증가되었다. 또한 7일간 실온에서 저장하면서 기간에 따른 변화를 살펴본 결과에서 산성조건에서는 큰 변화가 없지만 알칼리조건에서는 흡광도가 증가되었다. (+)-catechin과 (-)-EC은 알칼리조건에서 흡수파장 400∼430 nm에서 저장기간이 길수록 흡광도가 증가되었다. 이는 녹차의 갈변과 관계가 있을 것으로 생각되었다. 이상의 결과로, 녹차 Catechin유도체의 pH 및 저장기간에 대한 영향은 ECg, EGCg에 gallic acid의 결합에 의한 것으로 생각되고, C, EC의 불안정은 중합반응으로 생각된다. 녹차 catechin류는 대부분 산성에서 저장기간이 길고 안정한 것으로 나타났으나 생리활성이 강한 (-)-EGCg는 산성에서도 불안정한 것으로 나타났다. 결론적으로 녹차의 기능성 성분을 효율적으로 이용하기 위해서는 pH를 낮게 유지하여야 할 것으로 사료되어진다.

• 한국식품영양학회지
• /
• 제30권5호
• /
• pp.1068-1079
• /
• 2017

This study was applied to the PCA (Primary Components Analysis) for the sixteen table setting at the 2017 Yeongju local food contest. In this contest, we have developed a seonbibansang and a temple one-dish meal. As a result of the correlation analysis, the applicability and composition were 0.7980, harmony and taste were 0.7747 and easiness and composition were 0.7435. In the Primary Component $Y_1$, all the variables $X_1{\cdots}X_{10}$ mean that the quality of the food had positive values greater than zero. The second Primary Component $Y_2$ has a large positive value while $X_4$, $X_5$, $X_6$, $X_7$, $X_9$ have negative values. $Y_2$ is a value representing the sanitation variable, and can be considered a traditional and characteristic table setting natural to the native food in Yeongju. In addition, we developed an-hyangbansang and seonmyoaecheong food content by applying PCA factors (the elements of harmony, ease and sanitation). Table setting of an-hyangbansang provided energy 61.5%, protein 20.0% and fat 18.5% and seonmyoaecheong provided energy 62.7%, protein 15.4% and fat 22.2%. This satisfied the necessary amount of caloric nutrient intake that could be provided in a meal. Especially through story-telling, a modern interpretation - or rebranding - of local and traditional foods could make these traditional food products familiar to consumers currently. The developed table setting is felt to be conductive to the possible commercialization and introduction of traditional food into the mainstream commercial food service industry.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5290-5299
• /
• 2011

본 연구의 궁극적인 목적은 물의 효율적 공급과 관리를 위한 한 방안을 제시하는데 있다. 그 총체적 접근의 일환으로, 전체 물 순환 중 도시용수를 대상으로 각 사용테마(주거, 상업, 공업 등)별 수요예측모형을 개발하고 개발된 모델을 적용한 GIS기반 정보시스템 구현방안을 제시하는데 본 논문의 목적이 있다. 이를 위해 적절한 연구대상지의 평가 및 선정, 테마별 센서의 설치위치 및 종류 선정, 센서를 포함한 무선통신인프라 및 현장서버의 설치가 이루어졌다. 그리고 통신프로토콜과 실시간 데이터 모니터링시스템이 개발되었다. 다음으로 도시용수 및 관련시설 데이터의 GIS DB화 과정이 수행되었으며, 용수시설 및 실시간 모니터링된 유량 데이터를 활용할 GIS기반 관리시스템이 설계되고 구현 청사진이 제시된다.