• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.121-127
• /
• 1994

A procedure for the direct detection of (1-3)-$\beta$-glucanase isozymes in electrophoresis gels was developed. The procedure employed the commercial preparation of AZCL-pachyman as a chromogenic substrate for (1-3)-$\beta$-glucanases. The procedure detected the three basic isozymes which have been known to be expressed in germinating barley kernels. A major acidic and a minor isozymes were also detected in germinating kernels. The procedure was proved to be fast, simple and sensitive enough to be used for the analysis of the expression of (1-3)-$\beta$-glucanase isozymes in plant tissues. The detection limit of the procedure for the commercial preparation of Penicillium (1-3)-$\beta$-glucanase was estimated to be as low as 50$\mu$U. The procedure could be used for the investigation of (1-3)-$\beta$-glucanases in laboratories facilitated with ordinary equipments and research personnel.

• Nano
• /
• v.13 no.11
• /
• pp.1850126.1-1850126.10
• /
• 2018

Flexible strain sensors, as the core member of the family of smart electronic devices, along with reasonable sensing range and sensitivity plus low cost, have rose a huge consumer market and also immense interests in fundamental studies and technological applications, especially in the field of biomimetic robots movement detection and human health condition monitoring. In this paper, we propose a new flexible strain sensor based on thick CVD graphene film and its low-cost fabrication strategy by using the commercial adhesive tape as flexible substrate. The tensile tests in a strain range of ~30% were implemented, and a gage factor of 30 was achieved under high strain condition. The optical microscopic observation with different strains showed the evolution of cracks in graphene film. Together with commonly used platelet overlap theory and percolation network theory for sensor resistance modeling, we established an overlap destructive resistance model to analyze the sensing mechanism of our devices, which fitted the experimental data very well. The finding of difference of fitting parameters in small and large strain ranges revealed the multiple stage feature of graphene crack evolution. The resistance fallback phenomenon due to the viscoelasticity of flexible substrate was analyzed. Our flexible strain sensor with low cost and simple fabrication process exhibits great potential for commercial applications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.533-537
• /
• 2003

Compared to sintered polycrystalline diamond (PCD), the deposited thin film diamond has a great advantage on the fabrication of cutting tools with complex geometries such as drills. Because of high performance in high speed machining non-ferrous difficult-to-cut materials in the field of automobiles industry, aeronautics and astronautics industry, diamond-coated drills find large potentialities in commercial applications. However, the poor adhesion of the diamond film on the substrate and high surface roughness of the drill flute adversely affect the tool lift and machining quality and they become the main technical barriers for the successful development and commercialization of diamond-coated drills. In this paper, diamond thin films were deposited on the commercial WC-Co based drills by the electron aided hot filament chemical vapor deposition (EACVD). A new multiple coating technology based on changing gas pressure in different process stages was developed. The large triangular faceted diamond grains may have great contribution to the adhesive strength between the film and the substrate, and the overlapping ball like blocks consisted of nanometer sized diamond crystals may contribute much to the very low roughness of diamond film. Adhesive strength and quality of diamond film were evaluated by scanning electron microscope (SEM), atomic force microscope (AFM), Raman spectrum and drilling experiments. The ring-block tribological experiments were also conducted and the results revealed that the friction coefficient increased with the surface roughness of the diamond film. From a practical viewpoint, the cutting performances of diamond-coated drills were studied by drilling the SiC particles reinforced aluminum-matrix composite. The good adhesive strength and low surface roughness of flute were proved to be beneficial to the good chip evacuation and the decrease of thrust and consequently led to a prolonged tool lift and an improved machining quality. The wear mechanism of diamond-coated drills is the abrasive mechanical attrition.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.292-299
• /
• 2022

This study was conducted to analyze physical and chemical properties of horticultural substrates and response of hydroponically grown two cultivars of 'Namcheon' and 'Somirang' perilla by four different substrates: coir (chip:dust = 5:5), perlite, granular rockwool, and commercial mixed substrate (cocopeat:peatmoss:vermiculite:perlite: zeolite = 50:25:10:10:5). There were no significant differences in EC and pH according to substrates. Container capacity was the greatest in granular rockwool, and it showed appropriate levels in mixed substrate and coir. Air space was higher in coir and perlite than the other treatments. Bulky density reached a proper standard in all substrates excepting coir. The leaf length and width of 'Namcheon' indicated the most in mixed substrate, though the value of 'Somirang'was greatest in coir substrate. The leaf weight of both cultivars was highest in mixed substrate, and relatively low in coir and perlite. The total yield of leaves was separated by two groups: higher group, which are mixed substrate and granular rockwool, and lower group, which are coir and perlite. There was a large gap by 28% between these two groups. Therefore, this study suggests that substrates with high water holding capacity such as mixed substrate or granular rockwool are most suitable for the hydroponic cultivation of perilla, which require sufficient moisture supply to the root zone.

• Korean Journal of Food Science and Technology
• /
• v.7 no.4
• /
• pp.221-228
• /
• 1975

Meat tenderness is one of the most important factors in meat products because it plays a major role in the palatability of meat. To get information on the role of commercial meat tenderizer, the tenderizing ability of commercial meat tenderizer was measured with various substrates. The results obtained are as follows. 1. Content of crude protein in a commercial meat tenderizer was 4.9%. 2. Optimum temperature for proteolytic activity of meat tenderizer was $60{\sim}70^{\circ}C$. 3. Maximal activity of proteinase was obtained at pH $6{\sim}7$. 4. Proteolytic enzyme was activated by KCN, NaCN, EDTA. Thus, it was concluded that protease system of commercial meat tenderizer composed of plant origin proteinases. 5. Proteinase activity was completely inhibited by 10mM of N-Ethylmaleimide. 6. Commercial meat tenderizer showed stronger proteolytic activity on casein than on the water soluble fraction of meat protein, whereas it hydrolyzed the myofibrillar protein less efficiently.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.2
• /
• pp.129-133
• /
• 1993

The effect of different compositions of organic acids on the flavor profile of 10% sugar solution was investigated by the response surface methodology, and the results were used to evaluate the flavor characteristics of lactic acid fermented cereal beverages. A mixture of extruded rice flour (10%) and soymilk (7.8% dry matter) was fermented with Leuconostoc mesenteroides (Sikhae). Depending on the substrate pretreatments, for example, the malt or amylase digestion and the proteolytic enzyme hydrolysis, the sugar and organic acid composition of the product varied. The organic acid composition of the fermented beverages was in the ranges of 0.44-0.55% lactic acid, 0.05-0.09% acetic acid and 0.07-0.09% citric acid, while that of commercial apple juice was 1.59% malic acid and 0.49% acetic acid. The flavor profiles of fermented beverages added with 10% sucrose were compared to those of apple juice and a model mixture containing 0.48% citric acid, 0.39% lactic acid and 0.12% acetic acid in 10% sugar solution. The QDA diagram of fermented beverages approached to that of apple juice, when the substrate was digested by amylase but not by protease.

• Journal of Surface Science and Engineering
• /
• v.43 no.6
• /
• pp.289-296
• /
• 2010

The effect of organic additives, thiourea (TU), on the copper electroplated layer of large rectangular size was investigated through physical and various electrochemical techniques. It was found that TU had strong adsorption characteristics on the Ni substrate and affected the initial electroplating process by inducing surface reaction instead of mass transfer in the bulk solution. TU additives had its critical micelle concentration at 200 ppm in copper sulphate solution and showed abrupt change in morphological and electrochemical impedance spectroscopic results around this concentration, which could be related with the destruction of adsorption structure of TU-Cu(I) complex formed at the Ni substrate surface. By conducting a commercial electroplating simulation, when TU additives was included at cmc in the plating solution, it acted as a depolarizer for copper electrodeposition and was effective to reduce the unevenness of copper deposits between centre and edge region at high current densities of 10 ASD.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.306-309
• /
• 1989

This paper describes the Manufacturing process and electrical properties of ac thick film electroluminescent lamps which made of the mixture of ZnS:Cu,Cl phosphor powder and polymer binding materials. The phosphor layer is sandwiched between two electrodes, one of which is transparent, and is supported by a substrate. The substrate may be glass or flexible plastic or it may be metallic. In this study we manufactured suspend layer which consists of ZnS:Cu,Cl powder suspended in a NBR. As yet our results are behind other commercial product in electrical properties and brightness. However they can be improved by selection of appropriate polymer binding materials, development of blending technology.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.348-352
• /
• 2008

Deformation of the shadow mask is one of the problems encountered during the deposition of organic materials for manufacturing large size organic light emitting diode (OLED). The larger the glass substrate, the larger the shadow mask becomes. As the size of the shadow mask increases, its deformation becomes more severe, thereby making it difficult to deposit organic materials in a precise pattern on a substrate. In this paper, a new method for reducing drooping of the shadow mask for large size OLED vapor depositions is proposed. The proposed shadow mask with cross stripe wires has higher stiffness than the pure shadow mask, which results in reducing drooping of the shadow mask. A commercial FEM program, ANSYS, is used for the evaluation of the proposed shadow mask. The analysis showed that the shadow mask with cross stripe wires have an effect on reducing drooping about 18.6% or more.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.469.2-469.2
• /
• 2014

All-solid-state solar cell based on Chloride doped organometallic halide perovskite, (CH3NH3)PbIxCl3-x, has achieved a highly power conversion efficiency (PCE) to over 15% [1] and further improvements are expected up to 20% [2]. In this way, solar cells using novel light absorbing perovskite material are actively being studied as a next generation solar cells. However, making solution-process require high temperature up to $500^{\circ}C$ to form compact hole blocking layer and sinter the mesoporous oxide scaffold layer. Because of this high temperature process, fabrication of flexible solar cells on plastic substrate is still troubleshooting. In this study, we fabricated highly efficient flexible perovskite solar cells with PCE in excess of 11%. Atomic layer deposition (ALD) is used to deposit dense $TiO_2$ as hole blocking layer on ITO/PEN substrate. The all fabrication process is done at low temperature below $150^{\circ}C$. This work shows that one of the important blueprint for commercial use of perovskite solar cells.