• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.63-68
• /
• 1978

A boat seine has been used as a major fishing gear for catching anchovy (Engraulis japonica) in the southern coastal waters of Korea since the 1920s. Since the 1950s some improvement from the original seine has been made; powered boats equipped with net hauler has been used instead of rowing boats with hand-driven capstan, and the seining method has been changed into the trawling method. But even now, there are many problems to be solved in the view point of decreasing man power without decreasing catching efficiency. For the purpose, patti-net has been introduced from Japan and experimented on the commercial base since 1972, and it was known that the patti-net could be operated with man power as half as needed in the coventional net, but catching efficiency was not so desirable. Therefore, the study on the characteristics of it were required. The authors carried out a model experiment with a Qne-twentieth scale model net towed by a powered boat on the sea. The obtained results run as follows: 1. Hydrodynamic resistance of the model net can be explained as $R_p=69.6 V_{I.66}$ $R_h=37 v^2$ where $R_p$ and $R_b$ denote the resistance of the whole gear and the cod end in kg respectively, and v the towing speed in mlsec. 2. Performance of wing and cod end showed no deformation such as observed at the conventional net. 3. The ratio of opening at the entrance of bag net to that of cod end showed about 2: 1. Therefore, when we intend to enlarge the net to be able to operate in the deep fishing ground, the cod end should be enlarged in the same proportion and increased towing power is needed .. Then, it will be better to increase the ratio for increasing fishing efficiency without increasing towing power.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.3
• /
• pp.570-578
• /
• 2012

Compound K(ginsenoside M1) is one of saponin metabolites and has many benefits for human health. This study was to investigate Compound K produced from ginseng crude saponin extract with commercial cellulolytic complex enzyme(cellulase, ${\beta}$-glucanase, and hemicellulase) obtained from Trichoderma reesei. The effect factors(temperature, pH, ginseng crude saponin extract and enzyme concentration, and reaction time) on production of Compound K from ginseng crude saponin extract were determined by one factor at a time method. The selected major factor variables were ginseng crude saponin extract of 2%(w/v), enzyme of 7%(v/v), reaction time of 48 hr. Based on the effect factors, response surface method was proceeded to optimize the enzymatic bioconversion conditions for the desirable Compound K production under the fixed condition of pH 5.0 and $50^{\circ}C$. The optimal reaction condition from RSM was ginseng crude saponin extract of 2.38%, enzyme of 6.06%, and reaction time of 64.04 hr. The expected concentration of Compound K produced from that reaction was 840.77 mg/100 g. Production of Compound K was 1,017.93 mg/100 g and 862.31 mg/100 g, by flask and bench-scale bioreactor($2.5{\ell}$) system, respectively.

• Culinary science and hospitality research
• /
• v.16 no.3
• /
• pp.298-306
• /
• 2010

This study was conducted to develop soybean paste sauce with walnuts and sesame seeds and apply it to cooked spinach to examine the applicability of the sauce. Two factors of soybean paste sauce, soybean paste and glutinous rice paste, were need to decide the quantity of the ingredients. Nine soybean paste sauces were produced with various compounding ratio of soybean paste and glutinous rice paste, and color, viscosity and sensory evaluations were performed. Sensory evaluations were measured by 7-point Likert scale. Color($4.08{\pm}1.22$), taste($4.72{\pm}1.24$), viscosity($4.96{\pm}1.39$) and overall quality($4.24{\pm}1.51$) of the sample(soybean paste 400 g, glutinous rice paste 400 g) got the highest scores. Therefore, the sample(soybean paste 400 g, glutinous rice paste 400 g) was applied to cooked spinach. Cooked spinach using developed sauce and cooked spinach using general soybean paste were prepared and performed sensory evaluation. As a result, all sensory items score of cooked spinach using developed sauce were higher than that using general soybean paste. Especially, taste($4.96{\pm}1.15$) and overall quality($0{\pm}1.16$) of cooked spinach using developed sauce were significantly higher than taste($4.38{\pm}1.53$) and overall quality($3.56{\pm}1.53$) of cooked spinach using commercial soybean paste(p<0.05). Consequently, the applicability of soybean paste sauce using natural seeds was confirmed.

• Journal of the Korean Geographical Society
• /
• v.28 no.1
• /
• pp.16-39
• /
• 1993

This study aims to analyze the locational factors which the small firm enterpreneurs in Pusan City mainly consider in deciding location choices for their plants, and then to grasp the differences of the factors in terms of nature of firms, managerial personal characteristics and zoning areas. In order to implement the purpose of the rescarch, data are collected from selected small firm enterpreneurs throughthe questionaire. The main results are summerized as follows. First, it is pointed out that small firm indu-strialists for the regional choice consider crucial rationale as non-economic factor of personal reson with additional consideration of transpor-tation, infrastructure, service, market and labor forces. But in selection of site, they are apt to have high regard on the such factors as infra-structure, service, land and transportation factor. These factors to select the site demonstrate differentiation in terms of character of enter-prises, managerial characteristics and zoning areas. For example, land in the light of indu-strial sector is regarded as an important factor with longer the time of the establishment of firms or more aged or experienced enterpreneurs, wheras infrastructure and service in the heavy and chemical industrial sector are taken up as an important one with shorter the time of establishment of firms or less aged or experienced or higher educational background of enterpren-eurs. In addition, the non-economic factors such as the residential livebility and personal reason are picked up as important factors with smaller the firm or more aged or experienced, lesser educational background of entrepreneurs. Taking into consideration zoning area, infra-structure and service in the industrial area such as the exclusive and semi-industrial areas, land in green belt area, and transportation in the commercial and residential areas are singled out as the most important factors respectively. In addition, the non-economic factors of the resi-dential livability and personal reason in the non-industrial areas are also highly regarded. Second, land is picked up as the most impor-tant one of pulling factors toward the present site while other factors such as infrastructure, service, personal reason are also regarded as the secondary reason for the move-in decision; the pulling factors for the present plant location show somewhat differences in terms of the charcter of the enterprises, managerial chara-cteristics and zoning areas. Policy measures including land, infrastructure under the environmental aspects, service and transportations are, in turn, pointed out as the important ones for pushing factors. Meanwhile, as the important staying factor in the present place, transportation, infrastructure and service under the aspect of the agglomeration benefit, market, personal reason are considered. The pushing and staying factors also shows somewhat distinctive differences in terms of the character of enterprises, managerial chracteristics and zoning area. In the case of zoning area, land is regarded as the most important factor to move out, especially in the non-industrial areas inclu-ding the commerical and residential areas policy measures, infrastructure and service are indicated as important factors to move out. In the mean-time, as the important staying factor, industria-lists in the exclusive and semi-industrial areas point out transportation, infrastructure and service. Whereas the counterparts in the com-mercial area regard transportation and market as important factor, those in the residential area consider the non-economic factors such as personal reason and residential livability. Taking into consideration the result of this analysis, it is identified that the locational chara-cteristics of the intraurban small firm industries are not only associated with the character of enterprises, but also with manager's personal character and the trait of zoning area. Therefore, it seems that the thorough review or examination of enterprises, industrialists' characteristics and zoning areas will have meanin-gful significance in attemption explanation of small firm industries at the intrauban scale in the future. Especially, it appears that the eco-nomic factors such as land, infrastructure, service, transportation, and the non-economic factors such as residential livability and personal reason play together important parts to determine the locational choice of small firm industries along with non-industrial benefit. Thus, such status reveals the obvious implication for the intraurban industrial policy in the future.

• Korean Journal of Poultry Science
• /
• v.8 no.2
• /
• pp.91-114
• /
• 1981

This research was carried out from July to August, 1981, to analyse the true state of management, the skill of production, the structure of consciousness about the selected 294 poultry$.$farms, and to know about their bottlenecks and suggestions. The results obtained were as follows: 1. As for manager's ages, 31 to 45 years old men rate was 67.76%. upper 50years old men 15.94%. 2. 79.9% of farm omen possess attainments equal to or higher than those of upper secondary school graduates. 3. In poultry farming career of the investigated person, layer chicken industry was longer than broiler. 4. Occupations of farm owners before. doing poultry farming were farmers(32.35%), company employees, civil servants and soldiers, etc. 5. 58.62% of the person ran only poultry farming and the rest of them held the additional office of a farmer and a public officer. 6. There were many people who made a speciality of poultry farming holding additional jobs as dairy farming, cultivating crops, gardening, etc. 7. 42.35% of the person began poultry farming with under 1,000 layer chickens. And the rate of the ones with 1,000-2,000 broilers for the first time consisted 40.95% 8. Present breeding scale was that the rate of the farmers having 5,000-10,000 layer chickens was 37.13% and the ones having 5,000-10,000 broilers 38.32%. 9. The rate of the person supplying self-labor was 23.16%, the person having 1.3 employees 51.47% and the ones having under 20 employees 1.47%. 10. 74.26% of the poultry farms used very good quality of baby chicks. 11. The rate of the farms which used chicken feed making the point of the quality of it was 65.47% and the ones which bought it on credit 26.62%. 12. 65.47% bought feed directly from factories and 26.62% bought it from commercial agents. 13. The rate of the layer chicken farms paying for feed in cash was 19.39% and the broiler farms 32.74%. Most of the farms bought feed on credit by 30-60 days. 14. They bought the medicine for chicken from animal drug stores or veterinary hospitals. 15. The rate of the person posting up accounts roughly was 47.52% and that of the ones doing them detaily was 43.57%, 40% did not do them because of bother and only 21.22% had their own cashbooks.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.414-420
• /
• 2012

In an effort to commercialization of energy saving aeration apparatus, panel-type aeration membranes were prepared from polyurethane sheet of J company in Korea having tensile strength higher than $400kg_f/cm^2$ with thickness of 0.5mm. Micropores of 100 m size were made by poring technique utilizing needles. From lab-tests in 450 L water tank at temperature of $20^{\circ}C$, the performance of aeration panels at 40 L/min aeration rate showed 5 mg/L DO in less than 3 minutes approaching saturation point of 8 mg/L within 8 minutes. The results show very high efficiency with $K_{La(15)}$ ($16.34hr^{-1}$), Standard oxygen transfer efficiency (SOTE 54.7%) and Standard aeration efficienct (SAE 7.88 kg/kwh). Other pilot scale test in a $2m^3$ water tank with water temperature ($19^{\circ}C$) and aeration rate (30 L/min) showed DO exceeding 5 mg/L within 8 minutes along with $K_{La(15)}$ ($5.8hr^{-1}$), SOTE (42.1%) and SAE (6.41 kg/kwh). These efficiencies represent 2~2.5 times higher than conventional aeration devices. Especially, the achievement of higher Oxygen Transfer Rate indicate higher commercial viability. Conventional aeration devices when applied to clean water and wastewater frequently cause problems due to differences in actual Oxygen Transfer Rate. Our actual tests with $40^{\circ}C$ animal farm wastewater resulted very high efficiencies with Oxygen transfer efficiency ($OTE_f$ 22.1%) and $OTE_{pw40}$ (39.6%).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.5
• /
• pp.375-395
• /
• 2006

Purpose: Lingual nerve (LN) damage may be caused by either tumor resection or injury such as wisdom tooth extraction, Although autologous nerve graft is sometimes used to repair the damaged nerve, it has the disadvantage of necessity of another operation for nerve harvesting. Moreover, the results of nerve grafting is not satisfactory. The nerve growth factor (NGF) is well-known to play a critical role in peripheral nerve regeneration and its local delivery to the injured nerve has been continuously tried to enhance nerve regeneration. However, its application has limitations like repeated administration due to short half life of 30 minutes and an in vivo delivery model must allow for direct and local delivery. The aim of this study was to construct a well-functioning $rhNGF-{\beta}$ adenovirus for the ultimate development of improved method to promote peripheral nerve regeneration with enhanced and extended secretion of hNGF from the injured nerve by injecting $rhNGF-{\beta}$ gene directly into crush-injured LN in rat model. Materials and Methods: $hNGF-{\beta}$ gene was prepared from fetal brain cDNA library and cloned into E1/E3 deleted adenoviral vector which contains green fluorescence protein (GFP) gene as a reporter. After large scale production and purification of $rhNGF-{\beta}$ adenovirus, transfection efficiency and its expression at various cells (primary cultured Schwann cells, HEK293 cells, Schwann cell lines, NIH3T3 and CRH cells) were evaluated by fluorescent microscopy, RT-PCR, ELISA, immunocytochemistry. Furthermore, the function of rhNGF-beta, which was secreted from various cells infected with $rhNGF-{\beta}$ adenovirus, was evaluated using neuritogenesis of PC-12 cells. For in vivo evaluation of efficacy of $rhNGF-{\beta}$ adenovirus, the LNs of 8-week old rats were exposed and crush-injured with a small hemostat for 10 seconds. After the injury, $rhNGF-{\beta}$ adenovirus($2{\mu}l,\;1.5{\times}10^{11}pfu$) or saline was administered into the crushed site in the experimental (n=24) and the control group (n=24), respectively. Sham operation of another group of rats (n=9) was performed without administration of either saline or adenovirus. The taste recovery and the change of fungiform papilla were studied at 1, 2, 3 and 4 weeks. Each of the 6 animals was tested with different solutions (0.1M NaCl, 0.1M sucrose, 0.01M QHCl, or 0.01M HCl) by two-bottle test paradigm and the number of papilla was counted using SEM picture of tongue dorsum. LN was explored at the same interval as taste study and evaluated electro-physiologically (peak voltage and nerve conduction velocity) and histomorphometrically (axon count, myelin thickness). Results: The recombinant adenovirus vector carrying $rhNGF-{\beta}$ was constructed and confirmed by restriction endonuclease analysis and DNA sequence analysis. GFP expression was observed in 90% of $rhNGF-{\beta}$ adenovirus infected cells compared with uninfected cells. Total mRNA isolated from $rhNGF-{\beta}$ adenovirus infected cells showed strong RT-PCR band, however uninfected or LacZ recombinant adenovirus infected cells did not. NGF quantification by ELISA showed a maximal release of $18865.4{\pm}310.9pg/ml$ NGF at the 4th day and stably continued till 14 days by $rhNGF-{\beta}$ adenovirus infected Schwann cells. PC-12 cells exposed to media with $rhNGF-{\beta}$ adenovirus infected Schwann cell revealed at the same level of neurite-extension as the commercial NGF did. $rhNGF-{\beta}$ adenovirus injected experimental groups in comparison to the control group exhibited different taste preference ratio. Salty, sweet and sour taste preference ratio were significantly different after 2 weeks from the beginning of the experiment, which were similar to the sham group, but not to the control group.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.247-252
• /
• 2011

Electrical conductivity, drainage, and irrigation amount of nutrient solution are important factors for determination of the mixing ratio of fresh and reused nutrient solutions in closed-loop soilless culture. Generally a fixed mixing ratio is applied in commercial scale greenhouses using solar radiation-based irrigation system. Although it ensures continuous supply of fresh nutrient solution in the mixing process, occasional discharge of the drainage is inevitably required. This study was conducted to compare the nutrient replenishing effect under different mixing processes and to investigate appropriate mixing process. For this experiment, a fixed mixing ratio (FR), modifiable mixing ratio (MR), and open-loop (OP) as control were applied. Mixing ratio was determined by a set value of EC for dilution of collected drainage in FR and the set values of 1.0 and $2.0dS{\cdot}m^{-1}$ were used as treatments (FR 1.0 and FR 2.0), respectively. In MR, mixing ratio was determined based on EC and volume of drainage within irrigation volume per event. The volume of drainage stored in the drainage tank tended to increase in FR 1.0. Although such trend was not observed in FR 2.0 and MR, the volume of drainage stored in MR was lower than that in FR 2.0. The ion balance of $Mg^{2+}:K^+:Ca^{2+}$ or $SO^{2-}_4:NO^-_3:PO^{3-}_4$ in the drainage and reused nutrient solution changed within a narrow range regardless of treatment.

• Clean Technology
• /
• v.22 no.2
• /
• pp.132-138
• /
• 2016

The emission of SO₂ is inevitable in case of combustion of most fossil fuels except LNG in commercial power plant which has a bad effect on the durability of SCR catalyst. To develop a low temperature SCR catalyst which has a high NOx removal performance and excellent durability to SO₂, V₂O₅/TiO₂ catalysts were prepared by coating on the metal foam substrate with the impregnation amount of Sb₂O₃ as promotor. This study has evaluated the NOx removal performance and the durability to SO₂ on a laboratory scale atmospheric reactor and analyzed the properties of the prepared catalysts by means of porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive x-ray spectrometer), XPS (X-ray photoelectron spectroscopy). It was found that the surface area of catalyst increased with the impregnation amount of Sb₂O₃ and the NOx removal performance showed the highest value at the 2 wt% impregnation of Sb₂O₃. This results was considered to be due to the optimum active site on the catalyst surface. And also, Sb₂O₃ impregnated catalysts presented that NOx removal performance was maintained despite the exposure to SO₂ for 5 hours. Therefore it was confirmed that metal foam SCR catalyst for low temperature could be manufactured with the optimum control of Sb₂O₃ impregnation according to the SO₂ presence or not.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.