• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.25-34
• /
• 2013

The paper reviews the state of art in the design of liquefaction processes for the production of liquified natural gas, and addresses key design aspects to be considered in the design and how these design issues are systematically reflected in industrial applications. Various design options to improve energy efficiency of refrigeration cycles are discussed, including cascaded or multi-level pure refrigeration cycles which are used for covering wide range of cooling temperature, as well as mixed refrigerant cycle which can maintain a simple structure. Heat integration technique has been used for graphically examining differences of commercial cycles discussed in this paper, while energy efficiency and economics of commercial liquefaction processes has been summarized. Discussion also has been made about how to select the most appropriate set of drivers for compressors used in the liquefaction plant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4742-4748
• /
• 2014

A semi-automatic clutch was developed for drivers of vehicles with manual transmission. The clutch is operated by pressing a switch on the gear stick without stepping on a clutch pedal when the driver wants to shift gears. To automatic control a clutch, driving information is provided by sensors installed under the vehicle. On the other hand, sensors are prone to failure under severe driving conditions and a long time is needed to install or repair these sensors in the vehicle. In this paper, a semi-automatic clutch that received driving information by CAN communication from the ECU was developed and a pneumatic actuator was used to operate the clutch. The semi-automatic clutch by a pneumatic cylinder was operated with a supply air pressure of more than 3bar.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.30-42
• /
• 2021

The amount of compensation and the number of cases owing to car damage from pot holes on highways across the country increased by about 4.2 times and 3.5 times, respectively, in 2019 compared to 2015. Due to the increase in damage caused by these road hazards, the Ministry of Land, Infrastructure and Transport is developing technologies and services that can collect road hazard information by using devices on commercial vehicles (DTGs, black boxes, ADASs). In preparation for the development of these technologies, this study conducted an integrated assessment of algorithms developed for interrupted-flow and uninterrupted-flow traffic under three scenarios in order to provide road hazard information to drivers and road managers. As a result, the overall accuracy of the integrated assessment was derived at 81.88%. Errors generated in this integrated assessment reflect only missing data in less than 1 minute, GPS coordinate location and algorithm related errors, taking into account the purpose and assumptions of the assessment. Among them, we derive an accuracy of 90.15%overall by calibrating GPS error data. The results of this study can be used as basic data for improving the accuracy of location-based information collected by commercial vehicles and for policy development.

• Journal of Korean Society of Transportation
• /
• v.9 no.2
• /
• pp.135-144
• /
• 1991

In recent years parking problems have been rapidly highlighted. Particularly on-street parking has become a very serious problem so an immediate action needs to be taken to resolve this problem. On-steet parking is attributable not only to insufficient capacity of parking lots but also to the facts that must of the parking lots are far away from the destinations to which drivers intend to go and that their locations are unclear. The effect of on-street parking is so great as to cause road traffic problems such as traffic jam and danger to road safety as well as to lead to obstructing business activities resulting in a decline of commercial areas. Therefore on-street parking is an important problem for a city as a whole. In this paper I have investigated a parking lot information and guiding system as one of the techniques to resolve the on-street parking problem and have clarified the effect of introducing this system and necessary conditions for implementing an optimum information and guiding system. Moreover I have pointed out the problems to be encountered in imp-lementing such system in areas not equipped with infrastructures taking into account the road conditions in these areas and have stated that it would be necessary to develop a new idea of information and guiding system in order to overcome these problems. I have suggested a Shot Gun Method as a proposal and have discussed extensibility of this method in the future.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.2
• /
• pp.109-114
• /
• 2016

Nowadays, lower gear vibration and noise are necessary for drivers in automotive gearbox, which means that transmission gearbox should be optimized to avoid noise annoyance and fatigue before quantity production. Transmission error (T.E.) is the excitation factor that affects the noise level known as gear whine, and is also the dominant source of noise in the gear transmission system. In this paper, the research background, the definition of T.E. and gear micro-modification were firstly presented, and then different transmission errors of loaded torques for the spur gear pair were studied and compared by a commercial software. It was determined that the optimum gear micro-modification could be applied to optimize the transmission error of the loaded gear pair. In the future, a transmission test rig which is introduced in this paper is about to be used to study the T.E. after gear micro-geometry modification. And finally, the optimized modification can be verified by B&K testing equipment in the semi-anechoic room later.

• Journal of Information Technology Services
• /
• v.15 no.2
• /
• pp.203-217
• /
• 2016

This paper explores the distribution of the retail coffee franchise stores in Seoul using geostatistical analyses. The fact that lots of coffee stores are concentrated in the central area-Jongno and Jung-gu and commercial area-Gangnam and Seocho shows that the size of the floating population and potential customers is one of main drivers for making decisions on the locations of new stores. Except these 4 districts, the number of stores and population exhibit a positive correlation. By extracting the information on the 6 large coffee franchises store locations, we calculate the both haversine distances between stores of the same franchise and between stores of different franchises. We then empirically test the sitting and marketing strategies of Starbucks, Ediya, and Paik-Dabang using distance distributions. Significant pairs of Starbucks stores located within 100m confirm the sitting strategy of Starbucks which opens additional stores at crossways, stations, near shopping malls or other business zones though there already exist Starbucks stores. Meanwhile considerable portion of Ediya stores are found near Starbucks stores, which coincides with the sitting strategy of Ediya. We also find that Paik-Dabang that uses the low cost strategy has its stores open relatively farther than other franchises from Starbucks stores.

• Journal of Information Technology Services
• /
• v.11 no.sup
• /
• pp.17-26
• /
• 2012

Information technology convergence has been recognized one of the key drivers in the industry perspective. Korea government established IT convergence policy in 2008 and has been implementing it to the core industry such as automotive, shipbuilding and defense industries. This research analyzes various IT convergence issues based on an operation of defense IT convergence center, one of the industry IT convergence centers. Defense IT convergence issues are as follows : the methods for introducing rapid changing IT to military area, rapid deployment procedures of verified commercial technologies and products, regulations for using of domestic software promotion and so on. We define the concept of defense IT convergence and propose the framework and processes for applying IT to our defense sector as one of industries. Also, we establish various business models in the military perspective using defense IT convergence framework. In this paper, we focus the development of defense IT convergence through the alignment of national IT convergence policy and propose various business models established through operating a defense IT convergence center.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.27-35
• /
• 2010

A loader used for uploading materials into truck is a kind of construction equipment. Mainly, a wheel loader is applied to construction work. Recently, an automatic transmission for the wheel loader is used to help drivers get the repetitive works done comfortably. It is composed of geartrain, clutch pack, hydraulic control system and TCU. Especially, a high-performance proportional control valve and its control algorithm is demanded to achieve the shift quality during a change of speed. In this paper, the commercial package program was used in order to justify model of the proportional control valve and simulate it. Steady-state and dynamic characteristics of PCV were analyzed to classify attractive forces and hydraulic control characteristics. This model also was verified the validity compared to the experimental result. Using the developed model, performances of PCV were predicted as studying design parameters.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.5
• /
• pp.581-587
• /
• 2011

This paper presents a senior-level embedded software design course using a customized training kit. Embedded software design courses commonly entail a lot of practice hours and a semester-long project and thus requires a hardware platform on which the embedded software runs. A training kit has been designed such that both hardware system and operating system are not too complicated or heavy for undergraduate students to fully understand and to develop embedded software on their own. The course using the customized training kit gives the students hands-on experience of embedded software design and programming ranging from device drivers to user interface, thereby enabling them to have in-depth understanding of embedded software and to improve their programming skills more easily and faster than when using commercial training kits.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1154-1164
• /
• 2015

This paper proposes a fully sensorless driver for a permanent magnet synchronous motor (PMSM) integrated with a digital motor controller and an analog pre-driver, including sensing circuits and estimators. In the motor controller, a position estimator estimates the back electromotive force and rotor position using a sliding-mode observer. In the pre-driver, drivers for the power devices are designed with a level shifter and isolation technique. In addition, a current sensing circuit measures a three-phase current. All of these circuits are integrated in a single chip such that the driver achieves control of the speed with high accuracy. Using an IC fabricated using a $0.18{\mu}m$ BCDMOS process, the performance was verified experimentally. The driver showed stable operation in spite of the variation in speed and load, a similar efficiency near 1% compared to a commercial driver, a low speed error of about 0.1%, and therefore good performance for the PMSM drive.