• 대한지리학회지
• /
• 제49권3호
• /
• pp.423-437
• /
• 2014

구획화는 인간 활동에 영향을 미치는 새로운 지역적 틀을 만들어내는 공간 의사결정 과정이다. 그러나 구역 내 포함되어 있는 자연적 장애물은 재조직화된 구역 내에서 이루어지는 인간 활동의 효율성을 떨어뜨릴 수 있다. 이는 구획화 과정에서 경계의 특성, 즉 고도와 같은 자연적 특성, 상호작용과 같은 관계적 특성을 고려할 필요가 있음을 의미한다. 본 연구의 목적은 이러한 경계 특성을 반영하는 새로운 구획모델을 고안하는 것이다. 경계를 '결합' 혹은 '분리'와 같이 이분법적으로 간주하기 보다는 인접한 두 공간 단위 사이의 길이, 고도 편차, 상호작용과 같은 여러 경계 특성을 바탕으로 평가된 결합의 가능성을 나타내는 연속적 함수로 간주하고 목적함수 형태로 모델에 반영한다. 모델은 인구, 면적과 같은 수요 균형을 부여하는 제약조건뿐만 아니라 명시적인 연접성 제약조건을 갖는다. 경계 속성을 자연적 특성과 관계적 특성으로 구분하고, 이와 관련된 다양한 요인들에 대하여 적합도 분석을 수행하여 인접한 두 기본 공간 단위 사이의 결합 가능성을 평가한다. 행정구역 재설정문제에 고안된 모델 및 경계 특성 분석 방법을 적용한다. 분석 결과는 혼합정수계획법의 틀로 다양한 경계 특성을 고려한 구획화가 가능함을 보여준다.

• 대한임베디드공학회논문지
• /
• 제14권6호
• /
• pp.321-327
• /
• 2019

Spectral Beam Combining (SBC) is used for a high-power fiber laser in order to overcome the power limitation of single fiber laser. In SBC, several laser bwams with different wavelengths are combined to obtain a single-aperture beam by diffraction grating. The combining efficiency is dependent on a linewidth, beam quality and specific wavelength of each beam among others. In this paper, we consider the method of a wavelength monitoring and a feedback control of laser diodes used as seeds of laser beams to obtain optimum combining conditions. In order to measure the wavelengths of multi-beam, we use the high resolution camera and diffraction grating with 1,800l/mm. The experiment results show the possibility of feedback control of a current and temperature of multi-seed laser diodes to obtain optimum wavelengths for SBC.

• 한국군사과학기술학회지
• /
• 제17권5호
• /
• pp.611-619
• /
• 2014

Combining similar data provides larger data sets through conducting test for homogeneity of several samples under various production processes or samples from different LOTs. The test for homogeneity has been applied to either variable or attribute data, and for variable data set physical homogeneity has been tested without consideration of the specification to the set. This paper proposes a method for test of homogeneity based on quality level through using both variable data and the specification. Quality-based test for homogeneity as a way of combining data is implemented by test for coefficient of variation in the proposed method. The method was verified through the application to the data set in open literature. And possibility to combine performance data for various types of thermal battery was discussed in order to estimate operation reliability.

• 한국멀티미디어학회논문지
• /
• 제23권5호
• /
• pp.633-640
• /
• 2020

Defect region segmentation of TFT-LCD images is performed by combining defect pixels detected by a defect detection method into defect region, or by using morphological operations to segment defect region. Therefore, the result of segmentation of the defect region is highly dependent on the defect detection result. In this paper, we propose a method which segments defect regions sequentially according to the possibility of being included in defect regions in TFT-LCD images. The proposed method repeats the process of detecting a seed using the median value and the median absolute deviation of the image, and segments the defect region using the seeded region growing method. We confirmed the superiority of the proposed method to segment defect regions using pseudo-images and real TFT-LCD images.

• 대한산업공학회지
• /
• 제35권1호
• /
• pp.1-14
• /
• 2009

The efficiency of transportation requests fulfillment can be increased through extending the problem of vehicle routing and scheduling by the possibility of subcontracting a part of the requests to external carriers. This problem extension transforms the usual vehicle routing and scheduling problems to the more general integrated operational transportation problems. In this contribution, we analyze the motivation, the chances, the realization, and the challenges of the integrated operational planning and report on experiments for extending the plain Vehicle Routing Problem to a corresponding problem combining vehicle routing and request forwarding by means of different sub-contraction types. The extended problem is formalized as a mixed integer linear programming model and solved by a commercial mathematical programming solver. The computational results show tremendous costs savings even for small problem instances by allowing subcontracting. Additionally, the performed experiments for the operational transportation planning are used for an analysis of the decision on the optimal fleet size for own vehicles and regularly hired vehicles.

• Bioinformatics and Biosystems
• /
• 제2권2호
• /
• pp.52-57
• /
• 2007

The computational discovery of transcription factor binding site is one of the important tools in the genetic and genomic analysis. Rough prediction of gene regulation network and finding possible co-regulated genes are typical applications of the technique. Countless motif-discovery algorithms have been proposed for the past years. However, there is no dominant algorithm yet. Each algorithm does not give enough accuracy without extensive information. In this paper, we explore the possibility of combining multiple algorithms for the one integrated result in order to improve the performance and the convenience of researchers. Moreover, we apply new high order information that is reorganized from the set of basis predictions to the final prediction.

• 진공이야기
• /
• 제2권1호
• /
• pp.17-20
• /
• 2015

In this article, a historical and scientific review on the development of an ultrafast electron microscope is supplied, and the challenges in further improvement of time resolution under sub-picosecond or even sub-femtosecond scale is reviewed. By combining conventional scanning electron microscope and femtosecond laser technique, an ultrafast electron microscope was invented. To overcome its temporal resolution limit which originates from chromatic aberration and Coulomb repulsion between individual electrons, a generation of electron pulse via strong-field photoemission has been investigated thoroughly. Recent studies reveal that the field enhancement and field accumulation associated with the near-field formation at sharply etched metal nanoprobe enabled such field emission by ordinary femtosecond laser irradiation. Moreover, a considerable acceleration reaching 20 eV with near-infrared laser and up to 300 eV acceleration with mid-infrared laser was observed, and the possibility to control the amount of acceleration by varying the incident laser pulse intensity and wavelength. Such findings are noteworthy because of the possibility of realizing a sub-femtosecond, few nanometer imaging of nanostructured sample.in silicon as thermoelectric materials.

• ETRI Journal
• /
• 제33권2호
• /
• pp.295-298
• /
• 2011

We propose a motion-compensated frame interpolation method in which an accurate backward/forward motion vector pair (MVP) is estimated based on a parabolic motion model. A reliability measure for an MVP is also proposed to select the most reliable MVP for each interpolated block. The possibility of deformation of bidirectional corresponding blocks is estimated from the selected MVP. Then, each interpolated block is produced by combining corresponding blocks with the weights based on the possibility of deformation. Experimental results show that the proposed method improves PSNR performance by up to 2.8 dB as compared to conventional methods and achieves higher visual quality without annoying blockiness artifacts.

• 한국전기전자재료학회논문지
• /
• 제37권5호
• /
• pp.494-499
• /
• 2024

The possibility of a dye-sensitized solar cell (DSSC) submodule was evaluated as an independent power source that can drive a smart liquid crystal window (SLW) that selectively blocks sunlight when electricity is applied. In order to save energy and increase the functionality of buildings, SLW operation was supplied directly from DSSC submodule, rather than connecting to the existing power system and external power sources. It was confirmed that the SLW can control light transmittance through self-generation using the DSSC submodule composed of 6 cells at low light of 2,500 lux. These results imply that there is a high possibility of combining smart windows and DSSCs suitable for window-type building-integrated photovoltaic (BIPV) systems. DSSCs, which can self-generate power in low light, are expected to increase their usability in urban BIPV systems through combination with smart window technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.838-841
• /
• 2006

Orientational alignment patterns proved that they are very useful for realizing diverse properties of liquid crystals. Here we tried to produce the patterns combining interfered laser light and double irradiations. A photo-isomerizable polymer doped with azo dye, which induce uniform liquid crystal alignment to the uniform laser irradiation, was used as the alignment layer. Double irradiations into two orthogonal directions brought the orientation patterns similar to the checkerboard. It indicates the possibility of bistability on those patterns.