• 제목/요약/키워드: combining ability

검색결과 376건 처리시간 0.023초

가상 자전거 시스템을 이용한 고령자의 평형감각 증진에 관한 연구 (Study on the Improvement of Equilibrium Sense of the Elderly Using Virtual Bicycle System)

  • 정성환;박용군;정우석;권대규;홍철운;김남균
    • 전자공학회논문지SC
    • /
    • 제42권6호
    • /
    • pp.57-66
    • /
    • 2005
  • 본 연구에서는 가상현실기술과 자전거를 이용하여 평형감각 실조환자의 진단 및 시각, 전정감각, 체성감각 등을 효율적으로 진단하고 자극, 훈련시킬 수 있는 자전거 시뮬레이터 시스템을 개발하였고, 이 시스템이 평형감각 훈련에 대한 효과를 고찰하였다. 실험 방법은 20대의 건강한 젊은 성인과 70대의 노인을 대상으로 자전거 주행 시에 나타나는 주행시간, 주행속도, 중앙선이탈도, 무게이동과 무게중심의 변화를 측정하여 가상 자전거 시스템이 평형감각 훈련에 어떠한 영향을 미치는지에 대한 유용성을 분석 하였다. 실험결과, 20대의 젊은 성인과 70대의 노인이 훈련 후 주행속도와 주행시간 중앙선 이탈도가 감소하였고, 좌우 무게이동과 무게중심 면적이 모두 감소하였으며 시각적 피드백의 효과가 평형감각에 더욱 유용하다는 결론을 얻었고 시각적 피드백의 효과를 이용하여 복합 감성정보를 활용한 헬스기구나 평형감각 재활 훈련에 활용할 수 있음을 알 수 있었다.

도재용착용 비귀금속과 열가압성형도재의 전단결합강도 연구 (A Study on Shear Bond Strength of Heat Press Ceramic to Non Precious Porcelain Metal)

  • 김성수;김욱태;이명곤
    • 대한치과기공학회지
    • /
    • 제33권1호
    • /
    • pp.37-45
    • /
    • 2011
  • Purpose: Heat pressed ceramics, used for all ceramic restorations, have the additional advantage of being technically less change through using of the lost-wax technique. Conceptually, combining the ceramic with the clinically proven reinforcing ability of a metal framework would be advantageous; however, cause of mismatching of fusion between ceramics and metal frameworks which from differences of casting temperature and coefficient of thermal expansion, pressed ceramics could not be used with a metal framework. The purpose of this study was to compare shear bond strength of press-to metal ceramic to porcelain fused non precious metal and feldspatic porcelain fused non precious metal. Methods: The 30 metal specimens were casted in a porcelain fused non precious metal nickel-chromium alloy. They were divided into 3 groups by surface treatment and applied ceramic: $125{\mu}m$ aluminium oxide sandblasting and veneered feldspatic porcelain (group FP), $125{\mu}m$ aluminium oxide sandblasting and had press-to-metal ceramic applied (group PC), porcelain bonder (gold bonder) fused on surface of metal specimens and had press-to-metal ceramic applied (group PCG). In each group 10 metal specimens were used. The press-to-metal ceramic applied 20 specimens had ash-free wax pattern applied, the metal-wax complexes invested, and were pressed with heat press ceramic. All specimens were subjected to shear bond strength test at a crosshead speed of 1.0 mm/min. Results: The results of measured in Mean SD and data were analyzed by one-way AVOVA (p= .05) and Tukey HSD test (p= .05).: group FP $16.090{\pm}1.841$ MPa, group PC $12.620{\pm}1.8256$ MPa, group PCG $10.920{\pm}0.9283$, significant differences between all groups (p < .05). Significant differences were found in each between group FP and group PC, group FP and group PCG (p < .05). Conclusion: The shear bond strength of press-to-metal ceramic to porcelain fused non precious metal was described higher in unused gold bonder group than used gold bonder groups.

Impacts of wave and tidal forcing on 3D nearshore processes on natural beaches. Part II: Sediment transport

  • Bakhtyar, R.;Dastgheib, A.;Roelvink, D.;Barry, D.A.
    • Ocean Systems Engineering
    • /
    • 제6권1호
    • /
    • pp.61-97
    • /
    • 2016
  • This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

중공사 막을 이용한 급성호흡곤란증후군 환자용 폐 보조 장치의 설계와 평가 (Design and Evaluation of a Lung Assist Device for Patients with Acute Respiratory Syndrome using Hollow Fiber Membranes)

  • 이삼철;권오성;김호철;황영실;이현철
    • 멤브레인
    • /
    • 제15권3호
    • /
    • pp.224-232
    • /
    • 2005
  • 생체 폐를 대신해서 임시적으로 제공하는 폐 보조 장치(LAD)의 사용은 기계 환기술의 단순화와 체외순환 막형 인공폐의 기능을 결합하여 급성호흡부전 환자에 적합하다. 본 연구에서의 주 관심은 폐 보조 장치에서의 막 진동 효율에 있었으며 정량적인 실험 측정은 혈액 용혈에 대한 막 진동 의존을 확인하기 위하여 실행하였다. 또, 혈액 용혈은 막 진동이 이루어질 때 한계 용혈의 가진 주파수 대에서 결정하였다. 최대 기체 전달율을 보이는 675의 중공사 막으로 이루어져 있는 유형 5의 가진 주파수에서 최대 진폭의 발생 및 중공사에 진동의 전달에 의해 최대 산소 전달율이 일어났다. 이 주파수가 혈류량에 가동 가능했던 제 2 형태의 공진 주파수가 되어 높은 각 혈류량 비에서 $25{\pm}5$ 헤르쯔까지 가진이 되었으며, 혈액 용혈은 $25{\pm}5$ 헤르쯔의 가진 주파수에서 상대적으로 낮았다. 따라서 우리는 이 폐 보조 장치의 한계 용혈 주파수가 $25{\pm}5$ 헤르쯔인 것으로 결정했다.

한우 육질등급이 난포란의 배반포 체외생산에 미치는 영향 (Correlation of Hanwoo (Korean Native Cattle) Carcass Classification and Oocyte Donor for Blastocyst Production In Vitro)

  • 김강식;이홍철;박용수;김소섭;박흠대
    • 한국수정란이식학회지
    • /
    • 제30권3호
    • /
    • pp.161-170
    • /
    • 2015
  • These studies were conducted to establish the practical Hanwoo (Korean native cattle) improvement system through the combining of embryo transfer technology and confirming individual Hanwoo oocyte culture system and to investigate that correlation of Hanwoo carcass classification (intramuscular marbling) and oocyte donor for blastocyst production in vitro. In case of Hanwoo, the carcass meat quality grades were divided to grade $1^{{+}{+}}$, $1^{+}$, 1, 2, and 3 depends on fat distribution of longest muscle cross-sectional surface. As results, the numbers of follicular oocytes collected from individual fundamentally-registered Hanwoo yielded $1^{{+}{+}}$, $1^{+}$, 1, 2 and 3 meat quality were 9.5, 9.4, 8.5, 8.8 and 8.8 per ovary, respectively. The numbers of retrieval oocyte from follicles were significantly higher in the cattle yield $1^{{+}{+}}$, $1^{+}$ meat quality than in the cattle yield 1, 2 and 3 meat quality (p<0.05). The rates of blastocyst formation were 18.2, 21.3, 29.4, 30.9, and 31.5% in the cattle yield $1^{{+}{+}}$, $1^{+}$, 1, 2 and 3 meat quality of after in vitro maturation, respectively. It was significantly lower in the cattle yield $^{{+}{+}}$ and $1^{+}$ meat quality than in the cattle yield 1, 2 and 3 meat quality (p<0.05). In order to evaluate embryos quality, TUNNEL assay was conducted for each meat quality grade using blastocyst stage embryo on day 8. The results showed that apoptosis cell number was higher tendency in the cattle yield $1^{{+}{+}}$and $1^{+}$ meat quality (81 and 79, respectively) than in the cattle yield 1, 2 and 3 meat quality (51, 48 and 50, respectively) but there was no statistical significance in each group. After embryo transfer, the conception rate of recipient was 53.5 (23 out of 43), 52.1 (38 out of 73) and 58.0% (58 out of 100) in the meat quality of 1, $1^{+}$ and $1^{{+}{+}}$, respectively. These results showed that the conception rate was significantly higher in the cattle yield 1 meat quality than in the cattle yield $1^{{+}{+}}$, $1^{+}$, 2, and 3 meat quality (p<0.05). In summary, these results indicate that the application of confirming Hanwoo individual oocyte culture system and embryo transfer technology can make good use of the genetic resources conservation and improvement of Hanwoo. Relevance of the meat quality grade and reproductive ability of carcasses of Hanwoo will be considered to be one of the effective means for the associated research with obesity and reproduction.

잔디용 김의털의 후대검정(後代檢定)에 의한 포복습성(匍匐習性)에 관(關)한 연구(硏究) -제(第)III보(報). Top교잡(交雜)에 의한 후대검정(後代檢定) (An Evaluation of Creeping habit in Various Progenies of Red Fescue (Festuca rubra L.) -III. Top-Cross Progeny Performance)

  • 김달웅;김인섭
    • Current Research on Agriculture and Life Sciences
    • /
    • 제5권
    • /
    • pp.12-18
    • /
    • 1987
  • 본(本) 연구(硏究)는 Top교잡(交雜)에 의한 김의털의 포복습성(匍匐習性)을 관찰(觀察)하고, 단순상관계수(單純相關係數)에 의한 Top교잡(交雜)의 후대검정(後代檢定)을 통(通)하여 주요(主要) 특성(特性)들간의 관계(關係)를 알아보기 위해 실시(實施)되었다. 그 결과(結果)는 다음과 같다. 비포복형(非匍匐型)의 검정친(檢定親)과 교잡(交雜)된 포복형(匍匐型)들의 주복(株輻)이 가장 넓었으며, 다른 군(群)들과 유의차(有意差)가 있었다. 가장 주복(株輻)이 좁은 군(群)은 비포복형(非匍匐型) 검정친(檢定親)과 교잡(交雜)된 비포복형(非匍匐型)이었다. 초장(草長)과 종자수량(種子收量)은 포복형(匍匐型) 검정친(檢定親)과 교잡(交雜)된 비포복형(非匍匐型)과 비포복형(非匍匐型) 검정친(檢定親)과 교잡(交雜)된 포복형(匍匐型)이 포복형(匍匐型) 검정친(檢定親)과 교잡(交雜)된 포복형(匍匐型)이 더 길고 많았다. 그리고, 비포복형(非匍匐型) 검정친(檢定親)과 교잡(交雜)된 비포복형(非匍匐型)이 가장 짧고 적었다. 방임수분(放任受粉)과 같이 초장(草長)과 주복(株輻), 초장(草長)과 수량(收量), 주복(株輻)과 수량간(收量間)엔 정(正)의 상관관계(相關關係)가 있었으며, 유의차(有意差)를 나타내었다. 주복(株輻), 초장(草長), 종자수량(種子收量)(수량(收量))에 있어서, 비포복형(非匍匐型) 검정친(檢定親)과 교잡(交雜)된 포복형(匍匐型)과 비포복형간(非匍匐型間)에는 유의차(有意差)가 있었다. 그러므로 검정친(檢定親)으로는 포복형(匍匐型)보다 비포복형(非匍匐型)을 사용(使用)하는 것이 바람직하다고 사료(思料)된다.

  • PDF

고당도 대과성 특성을 지닌 중간모본용 딸기 "원교 3111호" 육성 (Breeding of "Wongyo 3111", Intermediate Strawberry Parent Line with High Sugar Content and Large-sized Fruit)

  • 노일래;조용섭;정재완;정호정
    • 한국육종학회지
    • /
    • 제41권3호
    • /
    • pp.319-323
    • /
    • 2009
  • 딸기는 근연교배가 다른 작물에 비해 상대적으로 약한 타 식성 작물이다. 딸기의 대다수 품종 육성방법은 품종간 교잡으로 부터 우수한 개체를 선발하는 선발육종을 기본으로 하여 왔다. 그러나 계통 육성방법도 우수한 유전자를 집적하기 위한 방법으로 많이 이용되어 왔었다. 따라서 딸기의 육종효율을 증진시키기 위해 자식 또는 근계교배를 통하여 조합능력이 높은 유전자형을 가진 근교계를 만들고자 형질이 우수한 품종을 대상으로 자식을 실시하였다. 이 자식계통 중 초세, 당도, 경도 등 원예적 형질이 아주 우수한 "원교 3111호"를 선발하였다. "원교 3111호"의 주요 특성을 보면 초형은 직립형이고, 초세가 매우 강하며 화아분화가 매우 빠르다. 과형은 원추형이고, 과색은 선홍색이며, 화방 당 화수는 16~17개 정도이고, 평균과중이 17.2 g이다. 과실의 당도는 11.3 $^{\circ}Bx$, 산도는 0.50%, 경도는 21.7 g/$mm^2$로 대조 품종에 비해 단산비가 상당히 높고 경도도 우수하다. 전체 수량은 대조품종과 큰 차이가 없으나 저온기 착과성이 떨어져 상품과율이 대조 품종에 비해 떨어지고, 흰가루병, 탄저병 등 내병성에 약한 경향이 있어 재배품종보다는 신품종 육성을 위한 중간모본용으로 적합하다.

잣나무 클론 채종원에서 간벌 강도에 따른 개량효과와 유전다양성 (Genetic Gain and Diversity in a Clonal Seed Orchard of Pinus Koraiensis Under Various Thinning Intensities)

  • 오창영;한상억;김장수;강규석;이병실
    • 한국육종학회지
    • /
    • 제40권3호
    • /
    • pp.263-268
    • /
    • 2008
  • 잣나무 채종원의 유전간벌을 위하여 재적생장에 대한 개량 효과와 유효클론수를 이용한 유전다양성을 평가하였다. 유전 간벌은 클론의 일반조합능력으로 나타나는 육종가(breeding value), 암꽃과 수꽃 개화량을 이용한 종자생산 기여도, 클론별 ramet수 등를 이용한 클론별 변이를 기초로 하였다. 차대 검정 결과에 의하여 산출된 재적생장에 대한 클론별 일반조합능력(genetic value) 및 1991년부터 2003년까지 조사된 개화량 성적을 이용하여 잣나무 채종원(1981년 조성) 179클론에 대하여 간벌 강도에 따른 유전다양성 및 개량효과를 분석하였다. 이때 채종원 외부로부터의 화분오염율은 30%(gene migration = 15%)로 설정하였다. 그 결과 재적생장에 대한 개량효과는 간벌율이 10%에서 60%까지 높아짐에 따라서 점차 증가하였다. 하지만 이보다 더 높은 간벌 강도에서 현저한 개량효과 증가는 나타나지 않았다. 유효클론수는 간벌강도 10%에서 60% 사이에서는 40클론으로 나타났으며, 70% 간벌율 이상에서는 증가하거나 감소하는 변동을 나타냈다. 따라서 본 잣나무 채종원에 대해서는 50%에서 60% 수준의 간벌 강도가 적당한 것으로 판단된다.

작물 분류에서 시공간 특징을 고려하기 위한 2D CNN과 양방향 LSTM의 결합 (Combining 2D CNN and Bidirectional LSTM to Consider Spatio-Temporal Features in Crop Classification)

  • 곽근호;박민규;박찬원;이경도;나상일;안호용;박노욱
    • 대한원격탐사학회지
    • /
    • 제35권5_1호
    • /
    • pp.681-692
    • /
    • 2019
  • 이 논문에서는 작물 분류를 목적으로 작물의 시공간 특징을 고려할 수 있는 딥러닝 모델 2D convolution with bidirectional long short-term memory(2DCBLSTM)을 제안하였다. 제안 모델은 우선 작물의 공간 특징을 추출하기 위해 2차원의 합성곱 연산자를 적용하고, 추출된 공간 특징을 시간 특징을 고려할 수 있는 양방향 LSTM 모델의 입력 자료로 이용한다. 제안 모델의 분류 성능을 평가하기 위해 안반덕에서 수집된 다중시기 무인기 영상을 이용한 밭작물 구분 사례 연구를 수행하였다. 비교를 목적으로 기존 딥러닝 모델인 2차원의 공간 특징을 이용하는 2D convolutional neural network(CNN), 시간 특징을 이용하는 LSTM과 3차원의 시공간 특징을 이용하는 3D CNN을 적용하였다. 하이퍼 파라미터의 영향 분석을 통해, 시공간 특징을 이용함으로써 작물의 오분류 양상을 현저히 줄일 수 있었으며, 제안 모델이 공간 특징이나 시간 특징만을 고려하는 기존 딥러닝 모델에 비해 가장 우수한 분류 정확도를 나타냈다. 따라서 이 연구에서 제안된 모델은 작물의 시공간 특징을 고려할 수 있기 때문에 작물 분류에 효과적으로 적용될 수 있을 것으로 기대된다.

딸기 교잡육종 시 품종적 성능에 미치는 자방친의 효과 (Effect of Seed Parents on Varietal Performance in Strawberry)

  • 노일래;조용섭;정재완;정호정
    • 한국육종학회지
    • /
    • 제42권4호
    • /
    • pp.374-380
    • /
    • 2010
  • 딸기의 우수한 교배친을 선발하기 위해 11품종의 자방친을 자식시켜 후대실생 개체들의 성능 검정한 결과 초세, 내병성, 수량성 등이 우수한 '아키히메', '매향', '설향' 등 3품종을 자방친으로 선발하였다. 선발된 3품종에 대하여 조합능력 검정을 한 결과 초세는 '아키히메'가 자방친인 조합에서 가장 우수하였고, 성숙기는 '설향'이 자방친인 조합에서 빠른 경향이었다. 그리고 '설향' ${\times}$ '도치오토메', '설향' ${\times}$ '금향', '설향' ${\times}$ '원교3111호', '아키히메' ${\times}$ '원교3111호'등의 조합은 18 g 이상의 대과종의 개체 비율이 높았다, 당도는 조합별로 큰 차이가 없었지만, 경도는 '매향'조합에서 높은 경향이었는데, 특히 '매향' ${\times}$ '도치오토메' 조합에서 높았다. 수량은 '아키히메' ${\times}$ '원교 3111호' 조합에서 가장 많았고, 그 다음이 '설향' ${\times}$ '금향', '매향' ${\times}$ '금향', '아키히메' ${\times}$ '도치오토메' 순으로 높았다.