• 약학회지
• /
• 제38권5호
• /
• pp.496-503
• /
• 1994

The combined products of antacids(AM) composed of aluminium hydroxide, magnesium hydroxide, and simethicone with a ratio of 1 : 1 : 0.1 and aceglutamide aluminium(AGA) were assayed for the antiulcer activity. The effect of the antacids(AM) in concurrent treatment with AGA was studied in acute gastric lesion induced by Shay's method, stress, ethanol, and indomethacin, in chronic gastric ulcers induced by acetic acid, and in duodenal ulcer induced by mepirizole. In all experimental models, the combined treatment of AM and AGA in the ratio of 2.3:1 showed significant potentiation in inhibition against acute gastric and duodenal ulcer and revealed a significant potentiation of the healing of chronic gastric ulcer.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2037-2047
• /
• 1991

본 연구에서는 재료 결정격자의 기본단위나 결정립의 형상등 가장 기본적인 형태가 6각형이라는 점에 착안하여 취성재료의 파손모델로 부재들의 결손을 이용하는 결손확률모델을 제안하여 부재결손에 따른 각각의 파손 해석모델과 결손확률을 구한다. 그리고 비결손모델에서 구한 기본인장하중을 기초로 하여 해석하고자 하는 하중하에서 각각의 파손해석모델을 모델링하여 유한요소법으로 부재결손에 따른 요소중심에서의 최대주응력을 구하여 이론극한인장강도와의 비와 결손확률로 취성재료의 파손확률을 구한다. 또한 취성정도에 따른 균열길이에 대한 치수 매개변수를 구함으로써 재료강 도 연구에 기초가 되게 한다.

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.25-31
• /
• 2015

This study deals with optimal conditions for design parameters of the multistage bollard with up and down installed on the street to protect pedestrians or stop cars. FE simulation and Taguchi method are used to achieve the optimization for the automatic multistage bollard to minimize effective stress caused by the external force. Thickness, height of stage 2, diameter and over-all height which affect its structural strength are chosen as design parameters. According to the experiments combined by orthogonal array, each of the effective stresses is evaluated. And the results are analyzed by using the signal to noise ratio concept of Taguchi method. From their results, the optimal combination of design parameters are proposed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.705-708
• /
• 2011

이젝터 시스템은 주유동 제트에 발생되는 전단 응력과 압력차에 의해 흡입 챔버 압력에 영향을 미치거나 이차 흡입 유동을 유도한다. 이젝터는 터빈 기반 복합사이클 추진기관 및 로켓엔진의 고고도 모사 설비, 압력회복장치, 담수화 시스템, 이젝터 램젯시스템과 같이 많은 분야에 적용되어 널리 사용된다. 본 연구에서는 다양한 고고도 환경 모사를 위한 멀티 이젝터의 형상 및 운전 조건을 결정하는 설계 절차를 수립하고자 하였다.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.23-29
• /
• 2007

The purpose of this study were to investigate the differences between female and male basketball players in knee neuromuscular biomechanical factors during basketball rebound jump. Twelve high school female ($17.9{\pm}0.8years$) and twelve male ($19.0{\pm}1.6years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament. Kinematic and ground reaction data were collected and combined with inverse dynamics to estimate the knee extensor and abductor torque. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes showed more reduced knee flexion at foot contact, more increased knee abduction, extensor and abductor knee joint torque at foot contact, and quadriceps ratio at stance phase than those of male athletes. In conclusion, Female athletes showed differences in knee neuromuscular biomechanical factors than male athletes during basketball rebound jump.

• Steel and Composite Structures
• /
• 제29권6호
• /
• pp.749-758
• /
• 2018

This article derived a hybrid coupling technique using the higher-order displacement polynomial and three soft computing techniques (teaching learning-based optimization, particle swarm optimization, and artificial bee colony) to predict the optimal stacking sequence of the layered structure and the corresponding frequency values. The higher-order displacement kinematics is adopted for the mathematical model derivation considering the necessary stress and stain continuity and the elimination of shear correction factor. A nine noded isoparametric Lagrangian element (eighty-one degrees of freedom at each node) is engaged for the discretisation and the desired model equation derived via the classical Hamilton's principle. Subsequently, three soft computing techniques are employed to predict the maximum natural frequency values corresponding to their optimum layer sequences via a suitable home-made computer code. The finite element convergence rate including the optimal solution stability is established through the iterative solutions. Further, the predicted optimal stacking sequence including the accuracy of the frequency values are verified with adequate comparison studies. Lastly, the derived hybrid models are explored further to by solving different numerical examples for the combined structural parameters (length to width ratio, length to thickness ratio and orthotropicity on frequency and layer-sequence) and the implicit behavior discuss in details.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.19-19
• /
• 1991

인장/비틀림 조합을력하에서 하중경로에 따른 Al₂O₃튜브 시편의 파괴거동을 조사하였다. 인장 후 비틀림을 한 하중경로(I)에서의 거시적인 균열의 전파방향과 파괴강도는 최대 주응력 파괴조건과 일치하였다. 전단응력(τ)/인장응력(σ)의 비가 일정한 하중경로(Ⅱ)에서의 거시적인 균열의 전파 방향은 최대 주응력 파괴조건과 일치한, 최대 주응력 파괴강도는τ/ σ의 비에 다라 일축인장 파괴 강도보다 증가 또는 감소하였다. Welbull 이론은 수누 비틀림에서의 최대 주응력 파괴 강도가 일죽이장 파괴강도보다 증가함은 예측하였으나, 하중경로(Ⅱ)에서 파괴 강도가 감소함은 예측할 수 없었다. 파괴강도가 일죽인장 파과강도보다 증가 또는 감소하는 현상은 미세조직의 관찰로 부터 미세결함면에 존재하는 전단응력이 파괴에 미치는 영향으로 설명하였다. 끝으로, 인위적 균열에서의 파괴 조건과 인장/비틀림 조합응력하의 Al₂O₃튜브 시편의 파괴 실험치에 근거한 새로운 경험식을 제안하였다. 제안된 파괴 조건식은 하중경로에 따른거시적인 균열의 전파방향과 파괴강도의 실험치와 잘 일치하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권1호
• /
• pp.123-130
• /
• 2006

콘크리트의 열화 및 철근부식에 대응하기 위하여 다양한 보수재료가 존재하나 이러한 보수재료를 평가하는 방법은 단순히 염해, 중성화 등의 단독열화만을 대상으로 하고 있어 여러 가지 열화인자가 복합적으로 작용하는 실제 환경과는 차이를 나타내게 된다. 따라서 본 연구에서는 폴리머시멘트계 보수용 단면복구재가 KS 기준을 만족하는지 확인한 후 복합열화 환경 하에서 염해, 중성화. 철근부식을 평가하였다. 실험결과 각각의 보수재료들은 KS 기준을 만족하였지만 내구성능은 상이하게 나타나 향후 이에 대한 고려가 필요할 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제78권3호
• /
• pp.231-253
• /
• 2021

Pure bending loading conditions are not frequently occurred in practical engineering, but the flexural researches are important since it's the basis of mechanical property researches under complex loading. Hence, the objective of this paper is to investigate the flexural behavior of concrete-filled rectangular steel tube (CFRT) through combined experimental and numerical studies. Flexural tests were conducted to investigate the mechanical performance of CFRT under bending. The load vs. deflection curves during the loading process was analyzed in detail. All the specimens behaved in a very ductile manner. Besides, based on the experimental result, the composite action between the steel tube and core concrete was studies and examined. Furthermore, the feasibility and accuracy of the numerical method was verified by comparing the computed results with experimental observations. The full curves analysis on the moment vs. curvature curves was further conducted, where the development of the stress and strain redistribution in the steel tube and core concrete was clarified comprehensively. It should be noted that there existed bond slip between the core concrete and steel tube during the loading process. And then, an extensive parametric study, including the steel strength, concrete strength, steel ratio and aspect ratio, was performed. Finally, design formula to calculate the ultimate moment and flexural stiffness of CFRTs were presented. The predicted results showed satisfactory agreement with the experimental and FE results. Additionally, the difference between the experimental/FE and predicted results using the related design codes were illustrated.

• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.379-389
• /
• 2018

In this research, the explicit closed-form local buckling solution of steel plates in contact with concrete, with both loaded and unloaded edges elastically restrained against rotation and subjected to eccentric compression is presented. The Rayleigh-Rize approach is applied to establish the eigenvalue problem for the local buckling performance. Buckling shape which combines trigonometric and biquadratic functions is introduced according to that used by Qin et al. (2017) on steel plate buckling under uniform compression. Explicit solutions for predicting the local buckling stress of steel plate are obtained in terms of the rotational stiffness. Based on different boundary conditions, simply yet explicit local buckling solutions are discussed in details. The proposed formulas are validated against previous research and finite element results. The influences of the loading stress gradient parameter, the aspect ratio, and the rotational stiffness on the local buckling stress resultants of steel plates with different boundary conditions were evaluated. This work can be considered as an alternative to apply a different buckling shape function to study the buckling problem of steel plate under eccentric compression comparing to the work by Qin et al. (2018), and the results are found to be in consistent with those in Qin et al. (2018).