동력기계공학회지 (Journal of Power System Engineering)

  • 제19권5호
  • /
  • Pages.25-31
  • /
  • 2015
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

다구찌 방법을 통한 다단식 상하이동형 볼라드의 설계 최적화 연구

A study on design optimization of a multistage bollard by Taguchi method

  • 변홍석 (울산과학대학교 기계공학부)
  • 투고 : 2015.05.01
  • 심사 : 2015.09.02
  • 발행 : 2015.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study deals with optimal conditions for design parameters of the multistage bollard with up and down installed on the street to protect pedestrians or stop cars. FE simulation and Taguchi method are used to achieve the optimization for the automatic multistage bollard to minimize effective stress caused by the external force. Thickness, height of stage 2, diameter and over-all height which affect its structural strength are chosen as design parameters. According to the experiments combined by orthogonal array, each of the effective stresses is evaluated. And the results are analyzed by using the signal to noise ratio concept of Taguchi method. From their results, the optimal combination of design parameters are proposed.

키워드

참고문헌

  1. S. H. Park, 2010, "A Study on the Development of a Bollard Design for Pedestrian Environments", Journal of Korean Society of Design Science, Vol. 23, No. 6, pp. 23-28.
  2. S. C. Choi and G. H. Kim, 2012, "A Study on the Design of bollards Appling the Principles of Universal Design", Korea Society of Basic Design & Art, Vol. 13, No. 1, pp. 523-531.
  3. T. J. Park, B. G. Jung, and K. M. Lee, 2011, "A Study on the Fundamental Performance of Electric-driven Bollard", Journal of Korean Society of Mechanical Technology, Vol. 13. No. 4, pp. 169-173. https://doi.org/10.17958/ksmt.13.4.201112.169
  4. H. S. Byun, 2015, "Development of a multistage bollard with up and down movement", Journal of the Korean Society for Power System Engineering, Vol. 19, No. 2, pp. 15-21. https://doi.org/10.9726/kspse.2015.19.2.015
  5. K. W. Nam, H. S. Gwon and C. S. Son, 2010, "Optimization of Design of Safety Block by Structural Analysis", Journal of the Korean Society for Power System Engineering, Vol. 14, No. 3, pp. 71-76.
  6. W. K. Nam, S. H. Ham and S. H. Oh, 2011, "Structural Analysis for Silk Hat type of the Harmonic Drive for Precision Robot", Journal of the Korean Society for Power System Engineering, Vol. 15, No. 5, pp. 61-66.
  7. B. K. Choi, J. H. Lee, J. M. Lee, J. M. Ha, D. S. Gu and W. C. Kim, 2013, "Structural Analysis of 800T on Hot Stamping Press", Journal of the Korean Society for Power System Engineering, Vol. 17, No. 1, pp. 97-103. https://doi.org/10.9726/kspse.2013.17.1.097