• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.767-771
• /
• 2008

From industrial field spearhead IT and new create an added value and market with fusion of traditional industry composition researches actively to be in the process of advancing. The application possibility of high-tech IT technique is coming to be high in construction industry. Currently, the user requirements that upgrade existing system to high-tech construction project information system combined construction CALS system applying in road/river business management service with high-tech IT such as ubiquitous and mobile techniques are increasing. Therefore, the objective of this study is to verify site application of RFID and mobile equipment for applying in high-tech field with ubiquitous and mobile techniques so that construction CALS system gets advanced increasingly.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.2
• /
• pp.1-10
• /
• 2015

Promising onshore wind farm sites in Gangwon province of Korea were investigated in this study. Gangwon province was divided into twenty five simulation regions and a commercial program based on Reynolds averaged Navier-Stokes equation was used to find out wind resource maps of the regions. The national wind atlas with a period 2007-2009 developed by Korea institute of energy research was used as climatologies. The wind resource maps were combined to construct a wind resource map of Gangwon province with a horizontal spatial resolution of 100m. In addition to the wind resource, national environmental zoning map, distance from substation, residence and automobile road, Beakdudaegan mountain range, terrain slope, airport and military reservation district were considered to find out promising wind farm sites. A commercial wind farm design program was used to find out developable wind farm capacities in promising wind farm site with and without excluding environmental protection regions. The total wind farm capacities with and without excluding the protection regions were estimated to be 46MW and 598MW, respectively, when a 2MW commercial wind turbine was employed.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.44-48
• /
• 2007

In recent years, the size of plane substrates and semiconductor wafers has increased. As conventional contact transportation systems composed of, for example, carrier rollers, belt conveyers, and robot hands carry these longer and wider substrates, the increased weight results in increased potential for fracture. A noncontact transportation system is required to solve this problem. We propose a new noncontact transportation system combining acoustic viscous and aerostatic forces to provide damage-free transport. In this system, substrates are supported by aerostatic force and transported by acoustic viscous streaming induced by traveling wave deformation of a disk-type stator. A ring-type piezoelectric transducer bonded on the stator excites vibration. A stator with a high Q piezoelectric transducer can generate traveling vibrations with amplitude of $3.2{\mu}m$. Prior to constructing a carrying road for substrates, we clarified the basic properties of this technique and stator vibration characteristics experimentally. We constructed the experimental equipment using a rotational disk with a 95-mm diameter. Electric power was 70 W at an input voltage of 200 Vpp. A rotational torque of $8.5\times10^{-5}Nm$ was obtained when clearance between the stator and disk was $120{\mu}m$. Finally, we constructed a noncontact transport apparatus for polycrystalline silicon wafers $(150(W)\times150(L)\times0.3(t))$, producing a carrying speed of 59.2 mm/s at a clearance of 0.3 mm between the stator and wafer. The carrying force when four stators acted on the wafer was $2\times10^{-3}N$. Thus, the new noncontact transportation system was demonstrated to be effective.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.130-138
• /
• 2015

Despite of recently strengthened vehicle emission regulations, NOx emissions are not decreased in urban areas because of discrepancies between certification emission test modes and real driving conditions. Thus, researches on RDE-LDV (Real-driving Emission-Light-duty Vehicle) have been conducted actively using PEMS (Portable Emissions Measurement Systems). In the present study, NOx emissions were measured for 5 Korean light duty vehicles for real driving conditions including city, combined, highway, and up-downhill test route. Emission characteristics were analyzed for averaged NOx emissions per unit driving distance of each driving test routes. Furthermore, MAW (Moving Average Window) method based on $CO_2$ emissions from WLTC, which will be supported for EU regulations, was utilized. It was revealed that DRs (deviation ratios) for diesel vehicles (i.e., 5.1 ~ 8.4) were greater than gasoline vehicles (less than 0.15). Especially DR of diesel vehicle for up-downhill test route was 8.4, which indicates severe NOx emissions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.930-934
• /
• 2006

In this study, we conducted water-quality analysis of wastewater and in-situ flow measurement using automatic flow rate measuring instrument to identify characteristics of wastewater in urban areas, and collected samples in gutter fur storm water drain, rainfall bucket, and aqueduct of pipe from roof, and outfalls of basins to examine the contribution by pollution origins such as base wastewater, atmospheric washing, runoff by roof surface, runoff by road surface, erosion of sewer sediment. In the result, the concentration of pollutants reached peak in the beginning of rainfall due to first flush, was 3 to 10 times higher than average concentration of dry period, and was lower than that of dry period due to dilution of storm water. In the analysis of the contribution by pollution origins, the ratio of load by sewer sediment resuspension to the total pollution load was 54.6% fer COD, and 73.3% fur SS. Accordingly, we can reduce the total pollutant load by periodical dredging and washing of sewer sediment, and control the loadings by overflow of combined sewer overflows.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.117-126
• /
• 2009

Korea Highway Corporation has played a role of the construction and operation of the highway for the past for 40 years. The private sector since the 90s has made highway construction and operation. Central government and local governments were paid at subsidy in least operating income to 1.5896 trillion won for private operators from 2001 to 2008. Thus, Korea Highway Corporation will have important implications for understanding the cost structure. Korea Highway Corporation, a general analysis of the input element is used efficiently. And the operation of labor and capital estimated highly of the substitution elasticities. Korea Highway Corporation are judged to need financial separation of a strategic outsourcing(business) enabled and the construction(maintenance and management) and business institutions. In addition, currently running at highway the operation of institutions combined to configure a new institution, if that institution invigorate the hi-pass, more of the country's highway believe to be increase operational efficiency.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.45-52
• /
• 2010

The objective of this paper is to develop and apply a method that estimates the amount of traffic congestion (vehicle hours of delay) caused by traffic accidents that occur on freeways in Korea. A key feature of this research is the development of a method to separate the non- recurrent delay from any recurrent delay that is present on the road at the time and place of a reported accident. The main idea to separate these two delays is to use the speed difference between speed under accident condition and speed under normal flow condition. For the case study application, two datasets were combined to accomplish the objective of the study: (1) accident data and (2) traffic flow data. Eventually, the results can be useful for the performance evaluation of accident reduction program, for strategic plans to cope with congestion caused by traffic accidents, and for rectification of the estimation method for traffic congestion costs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.13-20
• /
• 2016

The computerized management system for bridges is required due to the increased service life and number of bridges. This paper provides information and communication technology (ICT) - based bridge management system (BMS) to enable life cycle management through a comparative study with the development trend and function of domestic and foreign BMSs. BMS developed as an operation system combined an internet and mobile program, and was based on GIS technology and an object-based information management system. BMS supports the establishment of long-term strategies and short-term plans based on predicting the life-cycle performance profile and the necessary budget by object-based informatization for the whole life-cycle information of bridges. Useful knowledge information for supporting decision making was derived from the life-cycle management strategies establishment for approximately 6,000 existing bridges. BMS was developed to be applicable to all nationwide road bridges. In addition, it can be used practically to maintain the performance based on accurate maintenance result management, reducing cost by reasonable budget management, and enhancing the convenience and reliability of field data collection.

• Acta Via Serica
• /
• v.7 no.2
• /
• pp.153-178
• /
• 2022

This study analyzes the traces of East-West cultural exchange focusing on the palmette pattern expressed on Sassanid Persian and Silla Korean carpets. The results of the study are as follows. The palmette, which originated in ancient Egypt, is an imaginary flower made up of the transformation of a lotus, which combined with the Mesopotamian quadrant (四分法) and expanded to a four-leaf palmette and further to an eight-leaf palmette by applying the octant (八分法). The palmette, which was brought to Assyria, Achaemenid Persia, Parthia, Greece, and Rome, can be seen lavishly decorated with plant motifs characteristic of the region. Sassanid Persia inherited the tradition of the palmette pattern, which applied the quadrant and octant seen in several previous dynasties. On the one hand, it has evolved more splendidly by combining the twenty or twenty-one-leaf palmette and the traditional pearl-rounded pattern decoration of Sassanid Persia. These Sassanid Persian palmette patterns can be found through the palmette patterns depicted on the ceilings of the Dunhuang Grottoes located on the Silk Road. The palmette pattern of the Dunhuang Grottoes was expressed in the form of a fusion of Persian Zoroastrianism, Indian Buddhism, and indigenous religions. In the Tang Dynasty, it shows the typical palmette pattern of four and eight leaves in the medallion composition, which were mainly seen in Persian palmettes. The palmette pattern handed down to Silla can be found on a Silla carpet, estimated to be from around the 8th century, in the collection of Shoso-in (正倉院), Japan. The Silla carpet shows a unique Silla style using motifs such as peonies and young monks, which were popular in Silla while following the overall design of the Persian medallion.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.2
• /
• pp.81-93
• /
• 2024

In Korea, numerous large-scale infrastructure construction projects and housing site developments are being undertaken. However, due to limited land availability, sourcing high-quality backfill materials that meet the standards for railroad and road embankment compaction and mechanically stabilized earth (MSE) retaining wall construction poses significant challenges. Concurrently, there has been an increase in structural failures of many MSE retaining walls, attributed primarily to reduced bearing capacity and impaired drainage performance, resulting from inadequate backfill compaction. This study aimed to analyze the structural performance and safety of an MSE retaining wall using recycled soil as backfill. We conducted small-scale model tests utilizing 3D printing technology combined with two-dimensional numerical analysis. The study quantitatively evaluated the MSE retaining wall's performance concerning the recycled soil mixing ratio and reinforcement installation methods. Furthermore, the utility of 3D printing was confirmed through the production of an experimental wall designed to facilitate easy reinforcement attachment, mirroring the conditions of actual MSE retaining wall construction.