• ETRI Journal
• /
• 제28권5호
• /
• pp.656-659
• /
• 2006

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter-band application because of its simple structure and low fabrication cost. In our experiments the dual-band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.132-139
• /
• 2000

This paper reports a novel micromachining process based on UV-LIGA process and (110) silicon anisotropic etching for fabrication of a high-aspect-ratio comb actuator. The comb electrodes are fabricated by (110) SILICON comb structure considering the etch-rate-ratio between (110) and (111) planes and lateral etch rate of a beam-type structure. The fabricated structure was$ 400\mum \; thick\; and\; 18\mum$ wide comb electrodes separated by $7\mim$ so that the height-gap ratio was about 57. Also considering resonant frequency of the comb actuator and the frequency-matching between sensing and driving mode for gyroscope application, we designed the number, width, height and length of the spring structures. Electroplated gold springs on both sides of the seismic mass were $15\mum\; wide,\; 14\mum\; thick\; and \; 500\mum$ long. The fabricated comb actuator had resonant frequency ay 1430Hz, which was calculated to be 1441Hz. The proposed fabrication process can be applicable to the fabrication of a high-aspect-ratio comb actuator for a large displacement actuator and precision sensors. Moreover, this combined process enables to fabricate a more complex structure which cannot be fabricate only by surface or bulk micromachining.

• 대한전자공학회논문지TC
• /
• 제41권6호
• /
• pp.9-15
• /
• 2004

MIMO OFDM 시스템에서 comb형태의 훈련심볼을 사용하는 기존의 채널 추정방식은 가장자리 반송파 영역에서 채널 추정의 MSE(Mean Squared Error)가 큰 단점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 순환구조를 갖는 comb형태 훈련심볼을 제안한다. 제안된 순환구조에서는 모든 종류의 comb 훈련심볼이 각 안테나로부터 순환 전송되며 수신 단에서는 각 comb 형태의 훈련심볼들을 이용해 채널을 추정한 후, MSE로부터 구해진 최적의 가중치를 곱함으로써 채널 주파수 응답을 추정한다 모의실험을 통해 제안된 방식이 기존의 comb 형태의 훈련심볼에 비해 높은 성능을 나타냄을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.503-506
• /
• 2003

In general, the reinforcement of a structure is performed with cylinders. In this study, it is attempted to compare the safety Circular reinforcement with 4 fins and Honey-comb at the equal mass. Circular reinforcement with 4 fins have two kind of the models One has no hole in the upper and lower plates. The other has holes, and it is divided by 3 cases. And the maximum stress is investigated for the circular reinforcement with 4 fins and Honey-comb. The results shows that honey-comb is more strength than the others. And reinforcement with 4 fins of hole case2's maximum stress is 82% by compare 10 honey-comb.

• 대한토목학회논문집
• /
• 제12권2호
• /
• pp.1-10
• /
• 1992

이 논문에서는 철근 콘크리트 부재의 전단 해석을 위한 트러스 유사법이 발전된 형태인 '빗 구조' 해석 모델을 부분 프리스트레스트 콘크리트 부재의 전단 해석을 위해 수정하여 제안 하였다. 제안된 '빗 구조' 모델은 콘크리트 압축대의 위치와 경사 및 사압축대의 경사가 하중과 프리스트레스의 크기에 따라서 변하는 것이다. 역학적 모델의 구성을 위하여 비선형 보, 트러스 요소를 사용하였으며, 사압축대의 경사를 결정하기 위한 식을 '압축대' 이론을 수정하여 유도하였다. '빗구조' 모델에 의한 해석 결과를 부분 프리스트레스트 콘크리트 부재의 재하 실험 결과와 비교하였다. 이에 따르면 '빗 구조' 해석 결과에 의한 전단 철근의 응력은 수정 M$\ddot{o}$rsch이론과 고전 M$\ddot{o}$rsch 이론에 의한 계산치의 중간 정도의 값이다. 처짐과 전단철근의 응력값을 비교한 결과, 본 논문에서 제안된 '빗 구조' 모델이 부분 프리스트페스트 콘크리트 부재의 전단 해석에 사용될 수 있음을 알 수 있었다.

• 한국통신학회논문지
• /
• 제26권10B호
• /
• pp.1367-1374
• /
• 2001

본 논문은 무선 통신 시스템에 사용될 수 있는 저전력의 Cascaded Integrator-Comb(CIC) 필터 뱅크 구조를 제안한다. 필터 뱅크를 만들기 위해서 CIC 필터의 적분기 섹션을 변화시켜 구성하는 방법을 제안하였으며, 원하는 채널별 중심주파수를 정확히 맞추기 위하여 Modified CIC Filter(MCF)를 사용하는 방법을 제안하였다. 이 방법으로 채널별 중심주파수가 원하는 주파수에 위치하도록 필터 뱅크를 구현할 수 있음을 보였다. 또한 각 채널별 통과대역 주파수응답특성을 개선할 수 있는 새로운 Generalized Comb Filter(GCF)를 제안하였다. 한 개의 GCF와 두 개의 GCF를 각 채널에 적용하는 방법과 그때 통과대역의 주파수응답특성이 얼마나 향상되는지를 보였다. 또한 본 논문이 제안한 CIC 필터 뱅크와 일반 FIR 필터를 사용한 필터 뱅크의 구현 소자의 수를 비교하여 구조의 우수함을 입증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.848-853
• /
• 2001

Electrostatic actuation was adopted for ease of fabrication. We proposed a new driving scheme that uses the vector sum of force generated by comb-finger and by parallel plate. The moving and fixed electrodes are arranged to maximize the driving force. In this paper, an electrostatic field analysis is performed by Maxwell analysis tool for micro actuators. From the analysis, a comb-parallel type micro-actuator with 4${\mu}{\textrm}{m}$ width, 6${\mu}{\textrm}{m}$ overlap and 45${\mu}{\textrm}{m}$ height could be designed. In order to compare the new type of actuator with the conventional comb type of actuator, we arranged that both types have the same area and the same number of actuators. To make a high aspect ratio structure, we are developing fabrication process using SU-8 and electro-plating.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.10-15
• /
• 2013

In this paper, we propose a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure (PDLS), which has flat-top pass bands and multiwavelength switching capability. Generally, the PDLS can remove the dependency of the filter on input polarization. The proposed filter is composed of a polarization beam splitter, two half-wave plates (HWPs), and two polarization-maintaining fiber loops concatenated with a $60^{\circ}$ offset between their principal axes. By controlling two HWPs, it can operate in a flat-top band mode or a lossy flat-top band mode with an inherent insertion loss of ~3.49dB. In particular, flat-top bands can be interleaved in both modes, which cannot be realized in a Lyot-Sagnac comb filter based on a fiber coupler. Compared with Solc-type high-order comb filters with the same order, the proposed filter shows sharper transition between pass and stop bands.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.621-624
• /
• 1998

This paper presents a new configuration of dielectric bandpass filter using the comb-line filter design theory. This filter is composed of a homogeneous dielectric monoblock $(\varepsilonr=35.5)$ with two metal post and a dielectric sheet $(\varepsilonr=9.8).$ In this structure, the RF leakage is suppressed without other shield housing. For the fabricated filter, insertion loss value in the passband region was 0.9dB(Max.) and return loss value was 19dB(Min). Also, this filter has a attenuation pole in the stopband.

• ALGAE
• /
• 제32권2호
• /
• pp.87-100
• /
• 2017

The genera Hypnea and Calliblepharis of the family Cystocloniaceae are discriminated by their female reproductive structure, especially in the formation of carposporangia and gonimoblasts. Hypnea saidana, once classified based on obsolete evidence, has not been studied phylogenetically using molecular analysis and detailed reproductive structure though it shares many morphologic features with the genus Calliblepharis. To provide better understanding of generic relationship of H. saidana with Hypnea and Calliblepharis, we carried out molecular analyses using the nuclear-encoded small subunit ribosomal DNA (SSU) and chloroplast-encoded large subunit of the RuBisCO (rbcL), and exact morphological observations focusing on the reproductive structures of wild specimens. Our molecular phylogeny showed that H. saidana is closely related to Calliblepharis, but distinct from the clade of Hypnea. Female reproductive structure of H. saidana characterized by upwardly developing chains of carposporangia, central reticulum of cell, and gonimoblast filaments not connected to the pericarp provides definite evidence to assign the taxonomic position of this species to Calliblepharis. Based on our combined molecular and morphological analyses, we have proposed Calliblepharis saidana comb. nov., expanding the distribution of Calliblepharis habitat from the eastern Atlantic South Africa, the northern Indian Ocean, Australasia, and Brazil to the western Pacific Ocean.