• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.64-73
• /
• 2002

In this Paper, we propose the color-temperature conversion method using an one-dimensional illuminant chromaticity. It also presents the design and the implementation of the proposed method. The performance of the method is compared with that of two-dimensional conversion method in Robertson's algorithm based on calculated color temperatures. The proposed method is demonstrated experimentally for color temperatures in the range of 3,000OK to 25,000OK with the Xilinx Virtex-E FPGA XCV2000E-6BG560.

• Journal of Ginseng Research
• /
• v.9 no.2
• /
• pp.264-269
• /
• 1985

The inheritance of violet and green stems was examined in F1 F2 of violetstem variant x yellow-berry variant in Panax ginseng C. A. Meyer, and the characters of F1 and F2 plants were investigated. From these results, it was shown that most of the characters of F1 and F2 plants were simillar to the female plants. However, reciprocal crosses between violet and green stems yielded progeny of violet-stem variant. Thus the cross V♀x♂Y gave all violet-stem seedlings, and the cross Y♂ x Y♀ gave all violet-stem seedlings. And all of the crosses segregated in F2 in a ratio of 3 violet to 1 green.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.825-832
• /
• 2006

The effect of alginate coating in combination with an anti-browning agent on increasing the post-cutting shelf life and improving the quality of minimally processed apple cubes was studied during storage at room temperature for 5 days. A simple coating technique involving the chemical cross-linkage of alginate by calcium was used. Statistical-based experimental designs were applied to improve the quality of the alginate-coated apple cubes (ACAC). Plackett-Burman design was first used to determine the main factors influencing the preservation of the original weight, color, and texture of ACAC. Among these variables, alginate concentration ($X_1$), dipping time ($X_2$), and dipping temperature ($X_3$) significantly influenced the ACAC weight and color (confidence levels above 90%). Subsequently, the effects of the 3 main factors were further investigated by a central composite design. The polynomial models developed by response surface methodology were adequate to describe the relationships between the studied factors and the responses. Overall optimization conducted by superimposing the curves of the responses enabled the determination of an optimal range of the independent variables in which the five responses were simultaneously optimized. The point chosen as representative of this optimal area corresponded to $X_1=2.98%$, $X_2=0.85\;min$, and $X_3=55^{\circ}C$ and under these conditions the model predicted weight loss=0.522%, relative hardness=1.517, ${\Delta}E=1.423$, browning inhibition=93.403%, and ${\Delta}L=0.158$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.2 no.1
• /
• pp.45-64
• /
• 1984

NiNH4PO4 was Prepared from waste Ni catalyst used in hydrogenation of oil and fat. NiNH4PO4 was calcined at different temperature respectly 800,100,100˚C to prepare Nickel yellow. The result from this experiment are summerizer as follows: 1) Nickel yellow formed at 1100˚C was most clearness yellow color from color analyzer date. 2) Nickel yellow was consist of -Ni2P2O2 Ni3(PO4)2 from X-ray diffraction analysis. 3) The endothermic pick at 100˚C and exotherwic pick about 1050˚C on calcination of NiNH4PO4 were checked in DTA (difference Thermal analysis data.)

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.155-160
• /
• 1987

The investigation includes the application of $ZrSiO_4-Cd(SxSe_{1-x})$stain to ceramic body. The currently developed stain was compared to the commercially available stain in applying to ceremic glaze. Two stains (currently developed and commecially available) were mixed with frits and applied to ceramic tiles. The tiles were fired at 850 to 120$0^{\circ}C$ and tested by colorimeter in X.Y.Z. axis of the wavelength ranging from 580nm to 650nm. Applicability 18 stains to ceramic body was investigated by ISCC-NBS of Munsell color nomenclature. $ZrSiO_4-Cd(SxSe_{1-x})$stain is as good as V and Pr series stain in mixing composition of frits 9 to 1. It maintains red color at 100$0^{\circ}C$ in the mixture of frits, and shows as the strong acid resistance stain.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.189-192
• /
• 2005

비디오 분할의 목적은 같은 내용들을 가지는 프레임들의 순서를 표현하는 각 샷의 비디오 순서 분할을 위한 것이다. 그리고 색인에 대한 각 샷으로부터 키 프레임을 선택한다. 존재하는 비디오 분할 방법들은 2가지 그룹들로 분류될 수 있다. 먼저 경계값이 할당되어야만 하는 샷 전환 검출(SCD) 접근과 클러스터 수의 사전 지식이 요구되는 클러스터 접근이다. 본 논문에서는 컬러-$x^2$명도 히스토그램 기반 FCM(fuzzy c-means) 클러스터링 알고리즘을 사용하는 비디오 분할 방법을 제안하였다. 이 알고리즘은 앞에서 기술한 2가지 접근의 혼합이다. 그리고 이것은 두 가지 접근들의 결점을 극복하도록 설계 되었다. 실험 결과들은 컬러-$x^2$명도 히스토그램 기반 FCM 클러스링 알고리즘이 강건하고 비디오 시퀀스들의 다양한 형태들에 응용할 수 있다고 제안한다.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.510-517
• /
• 2013

In this study, the properties of blue inorganic nano-pigments with a spinel structure were systematically investigated. We report the preparation of a blue ceramic nano-pigment and the Co and Ni substitutional effects on the blue color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of cobalt and nickel-based blue ceramic nano-pigments. Various compositions of $Co_xMg_{1-x}Al_2O_4$ and $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using apolymerized complex method. The obtained powder was preheated at $400^{\circ}C$ for 5 h and then calcined at $1000^{\circ}C$ for 5 h. XRD patterns of the (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ samples showed a single phase of the spinel structure in all compositions. TEM results indicated nano-sized pigments for (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ with a particle size ranging from 20 to 50 nm. The characteristics of the color tones of (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ were analyzed by CIE $L^*a^*b^*$ measurements. In addition, the thermal stability and the binding characteristics of (Co,Mg)$Al_2O_4$, (Ni,Mg)$Al_2O_4$ are discussed in terms of the TG-DSC and FT-IR results, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.211-211
• /
• 2000

Carbon nanotubes (CNTs) have been spotlighted as one of promising field emission displays(FEDs). For the first time, to authors knowledge, we have developed the 9" color CNT-FEDs with the resolution of 240x576 lines. The 9" CNT-FEDs with diode-type and triode-type structures are presented. The well-dispersed CNT paste was squeezed onto the metal-patterned cathode glass. For the anode plate, the Y2O2S:Eu, ZnS:Ag,Cl low-voltage phosphors were printed for red, green, and blue colors, respectively. The vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images were demonstrated at 2 V/um. High brightness of 800, 200, and 150cd/m2 was observed on the green, red, and blue phosphors at V/um, respectively. Field emission characteristics of a triode-type CNT-FED were simulated using a finite element method. the resultant field strength on the cathode was modulated by gate bias and emitted electrons were focused on the anode. A relatively uniform emission image was experimentally achieved at the 800V anode. A relatively uniform emission image was experimentally achieved at the 800V anode and the 50-180 V gate biases. Energy distribution of electrons emitted from CNTs was measured using an energy analyzer. The maximum peak of energy curve corresponded to the Fermi energy level of CNTs. The whole fabrication processed of CNT-FEDs were fully scalable and reproducible. Our CNT-FEDs has demonstrated the high potential of large-area and full-color applications with very low cost fabrication and low power consumption.

• The Journal of Korean Academy of Prosthodontics
• /
• v.16 no.1
• /
• pp.38-44
• /
• 1978

Color is an important factor in dental esthetics. Application of natural tooth color will not fail to produce pleasing results. But a standardized method of shade matching has not been adopted. If we are to overcome the color matching problem in dentistry, an understanding of the nature of color and light is essential. The purpose of this study was to compare the effects of different light sources and different background colors on the ability of observers to correctly match shades of artifical teeth. And observation was made to determine if the time spent in making a shade match was a factor in the correctness of the response. A test method was devised and 50 individuals made observations which were recorded and analyzed. $X^2$-test gave results indicating that the time factor had no effect on the response made. An analysis of variance showed the following effects significant at the five percent level; (1) light source (2) background color (3) subject. The following conclusions can be drawn from this study; (1) The time spent in making shade selection is not a factor in the correctness of the selections. (2) The light source used is an important factor in matching tooth shade; and there is no significant difference between the light sources in shade matching. (3) Under the conditions of this study, the greatest accuracy in shade matching was obtained on the brown background.

• Journal of the Korean Society of Costume
• /
• v.50
• /
• pp.23-32
• /
• 2000

This study was performed to investigate the mothers' preferences for their children's clothing images and color images. Questionaries were analysed by factor analysis cluster analysis one way ANOVA x2 -test. The results are as follow: First the preferred clothing images for children have no differences across gender. The preferred images are active tidy and fashionable. Second the preferred clothing images are according to season. In the case of clothing color images the preferences in spring and summer seasons are differed from fall and winter seasons. Third factors of boy's clothing image were fashionable cute splendid and classic And factors for girl's clothing image were lively tidy fashionable and classic. These factors revealed the differences of preferences between boys and girls clothing image. Fourth the preferences of clothing color image for children changed across seasons. Bright and neat color images were preferred in spring and summer warm and deep color images were preferred in fall and winter. Fifty the preferences of clothing images classified into four groups and each group has the different preference in color tone. Finally Season and gender were revealed to be more important variables in the preferences of children's clothing image and color image.