• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.149-152
• /
• 2009

Recent trends show an increased usage of 'colored concrete', a inorganic pigmented concrete mix, especially in smalll to large scale buildings. However, due to lack of varieties, current usage of colored concrete is limited to the one or two simple color of the time in construction work. so, this study is to investigate the properties of concrete adding temperature reactive pigment. The results of the experiment, the basic material characteristics of concrete such as of compressive strength and slump is affected by the amount rate of adding the temperature reactive pigment. And, it showed the excellent color expression and changing with temperature reactive pigment.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권4호
• /
• pp.275-285
• /
• 2012

This paper presents a changes of luminescence property for converted white LEDs with the commercially available silicate phosphor. If silicate phosphor's quantity increase step by step. luminescence property will be changing. we analyze luminescence property for these change and carry out the high temperature aging test for 7,000 hours, the high temperature and humidity aging test for 7,000 hours for reliability. LED degradation not only results in reduced light output but also in color changes. so we monitor correlated color temperature (CCT), chromaticity coordinates(x, y) and spectrum intensity. Those results suggest that humidity factor more bad effect in color changes than temperature factor and Lighting quality is related with quantity of phosphor.

• 대한가정학회지
• /
• 제40권12호
• /
• pp.109-118
• /
• 2002

The Purpose of this study was to investigate dyeing properties and color fastness of Ainus firma sieb. et Zucc. Fruit, according to dyeing temperature, dyeing time, dyeing concentrations and various mordants. The results were as follows ; 1. The dyeabilities of the natural colorants extracted from Alnus firma fruit were investigated under various dyeing temperature, dyeing time and dyeing concentration. As a result, the optimum dyeing temperature, time and concentration of silk fabric with Alnus firma fruit were $60^{\circ}C$, 60min and 100％(o.w.f.) respectively. 2. Alnus firma fruit extract dyed reddish purple (RP hue) on the Fe-mordanted silk fabric. In the case of other mordants, silk fabrics dyed yellow (Y hue). 3. Generally, the light color fastness was relatively fair in the silk fabric dyed with the Alnus firma fruit and Fe mordant. The washing color fastness of color change of silk dyeings mordanted with Al, Sn showed 4 grade. However, the dry cleaning color fastness of the silk fabric was fastness was excellent. The rubbing color fastness showed 4 grade at the most of mordants except Cu.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.669-674
• /
• 2012

Yellow phosphor dispersed color conversion glasses are promising phosphor materials for white LED applications because of their good thermal durability, chemical stability, and anti-ultraviolet property. Six color conversion glasses were prepared with high Tg and low Tg specimens of glass. Luminous efficacy, luminance, CIE (Commission Internationale de l'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) of the color conversion glasses were analyzed according to the PL spectrum. Color conversion glasses with high Tg glass frit, sintered at higher temperature, showed better luminous properties than did color conversion glasses with low Tg glass frit. The characteristics of the color conversion glass depended on the glass composition rather than on the sintering temperature. The XRD peaks of the YAG phosphor disappeared in the color conversion glass with major components of $B_2O_3$-ZnO-$SiO_2$-CaO and, in the XRD results, new crystalline peaks of $BaSi_2O_5$ appeared in the color conversion glass with major components of $Bi_2O_3$-ZnO-$B_2O_3$-MgO. The characteristics of CIE chromaticity, CCT, and the CRI of low Tg color conversion glasses showed worse color properties than those of high Tg color conversion glasses. However, these color characteristics of low Tg glasses were improved by thickness variation. So color conversion glasses with good characteristics of both luminous and color properties were attained.

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.184-194
• /
• 2016

Many industrial processes require reliable temperature measurements in harsh environments with high temperature, dust, humidity, and pressure. However, commercially-available conventional temperature measurement devices are not suitable for use in such conditions. This study thus proposes a reliable, durable two-color radiation thermometer (RT) for harsh environments that was developed by selecting the appropriate components, designing a suitable mechanical structure, and compensating environmental factors such as absorption by particles and gases. The two-color RT has a simple, compactly-designed probe with a well-structured data acquisition system combined with efficient LabVIEW-based code. As a result, the RT can measure the temperature in real time, ranging from 300 to $900^{\circ}C$ in extremely harsh environments, such as that above the burden zone of a blast furnace. The error in the temperature measurements taken with the proposed two-color RT compared to that obtained using K-type thermocouple readouts was within 6.1 to $1.4^{\circ}C$ at a temperature range from 200 to $700^{\circ}C$. The effects of absorption by gases including $CO_2$, CO and $H_2O$ and the scattering by fine particles were calculated to find the transmittance of the two wavelength bands of operation through the path between the measured burden surface and the two-color probe. This method is applied to determine the transmittance of the short and long wavelength bands to be 0.31 and 0.51, respectively. Accordingly, the signals that were measured were corrected, and the true burden surface temperature was calculated. The proposed two-color RT and the correction method can be applied to measure temperatures in harsh environments where light-absorbing gases and scattering particles exist and optical components can be contaminated.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.681-687
• /
• 2013

본 연구는 학습 환경의 실내 온도와 학습재료 색채와의 조합이 학습수행에 어떠한 영향을 미치는 지를 살펴보고자 하였다. 이를 위해 학습활동 적정온도($22.5{\sim}24^{\circ}C$)를 중심으로(중립 실내 온도 조건), 그 이상인 조건(고온 실내온도 조건), 그리고 그 이하인 조건(저온 실내 온도 조건)으로 각각 실내 온도 조건을 구분하였으며, 난색계열인 빨간색과 한색계열인 파란색, 그리고 중성인 검은색과 연두색으로 각각 색채 조건을 구분하였다. 학습과 관련된 과제로는 음운 작업기억 과제를 사용하여 집단 간 실내 온도 조건에 따른 색채 조건에서의 과제 수행을 살펴보았다. 그 결과, 학습과제의 반응시간에서는 각 독립변수들에 의한 차이가 유의하지 않은 반면, 정확률에서는 색채 조건 중 빨간색과 검은색 조건에서 보다 정확한 수행이 나타났다. 이는 빨간색이 가진 현저성과 색채 온도감 및 검정색이 가진 친숙성과 다른 색에 비해 유일하게 현저성을 가지지 않는 특이성이 존재하기 때문에 나타난 결과로 해석할 수 있다.

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.43-52
• /
• 2011

LED lighting may cause different sensation and color appearance due to the different spectral power distributions compared to those of conventional lightings. Particularly, the CCT (Correlated Color Temperature) of LED lighting has a major effect on color appearance so that this study conducted an experiment through a subjective evaluation and luminance measurement for effective color appearance in a space. This study performed a subjective evaluation under the seven different LED CCT conditions, and color appearance was evaluated with major five colors in a customized lighting box. In addition, luminance measurement was conducted for each CCT and color condition to compare the results from a subjective evaluation. The results of this study may help to select a proper LED CCT for specific color conditions.

• 한국HCI학회논문지
• /
• 제10권1호
• /
• pp.29-41
• /
• 2015

3D 디스플레이, 진동, 서라운드 음향 등 다양한 감각자극을 활용한 영상실감 기술이 상용화되었으나, 후각을 사용한 영상의 실감향상에 대해서는 아직 뚜렷한 진전이 없다. 후각은 인간의 정서와 강하게 연합되어 있기 때문에, 이를 잘 활용한다면 높은 수준의 실감향상이 가능할 것으로 기대할 수 있다. 본 연구는 영상에 냄새를 암시하는 뚜렷한 대상(커피, 꽃 등)이 존재하지 않을 때, 영상의 색온도와 관련이 높은 향의 제시가 영상의 실감향상에 미치는 효과를 검증하였다. 이를 위해 먼저 48가지 향을 수집하여 1,500K (따뜻한) ~ 15,000K (차가운)의 색온도 척도를 통해 향과 색온도의 매칭을 실시하여, 따뜻한 혹은 차가운 색온도와 뚜렷한 매칭을 보인 향 8개 (따뜻한 향 4개, 차가운 향 4개)를 선정하였다 (실험 1). 이를 토대로 이미지와 영상에 따뜻한 (3,000K), 중립적인 (6,500K) 혹은 차가운 (14,000K) 색온도를 적용한 후, 따뜻한 혹은 차가운 향을 제시하여 향과 색온도의 일치도 (일치, 불일치, 중립)에 따라 실감이 얼마나 향상되는지 참가자들에게 7점 척도로 평정하게 하였다 (실험 2-3). 그 결과 향과 색온도가 일치할 때 참가자들은 불일치하거나 중립적일 때 보다 이미지와 영상의 실감을 더 높게 평가하였다. 본 연구는 영상에 후각 정보를 가진 구체적 대상이 없을 때에도 색온도 감성과 일치하는 향을 제공함으로써 영상실감 향상이 가능하다는 것을 보여준다는 점에서 중요한 실용적 가치가 있다.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.68-83
• /
• 2020

This study suggests a method to predict the color appearance of textiles that shifts depending on illumination variations. The suggested method allows the calculations of lightness, chroma, and hue appearance values from the spectral reflectance values of the textile and illuminant. The accuracy of the method was evaluated through numerical and statistical comparisons between the predicted and the measured color appearance values of 24 fabric samples under CIE standard illuminant D65. As a result, there were excellent agreements between the two data sets with the error values close to zero. The predicted color appearance values of 24 samples under two illuminating (color temperature-luminance) conditions, 2700 K-100 cd/㎡ and 6500 K-100 cd/㎡, were then compared to prove the significant effect of illumination on the color appearance of textiles. The color appearance values were also compared with spectrophotometrically measured physical color attributes, that is, true colors of the samples. The physical color attributes of samples were unchanged; however, differences in color appearance under different conditions were generally much larger than the suprathreshold color difference tolerances discussed in the color science literature. Finally, the magnitude of the illumination effect depending on the physical color attributes of samples was also analyzed.

• Journal of the Korean Wood Science and Technology
• /
• 제39권3호
• /
• pp.238-243
• /
• 2011

라디에타 소나무(Pinus radiata D.Don) 열압밀화 목재의 압밀화 시간과 온도에 따른 재색의 변화를 관찰하였다. 색차계를 이용하여 재색을 측정하였으며, NBS (National Bureau of Standards)에 의해 색차를 평가하였다. 그 결과 압밀화 온도의 증가에 따라 백색도는 감소하였고, 적색도와 황색도는 증가하였다. 그리고 대부분의 색차는 'Very Much (대단한 차)'로 나타났다. 압밀화 시간의 증가에 따른 재색의 변화는 압밀화 시간의 증가에 따라 백색도는 감소하였으나 감소폭은 온도에 의한 영향보다 적은 것으로 나타났다. 적색도와 황색도에 미치는 열 압밀화 시간의 영향은 미약하였다. 즉 압밀화 가열온도와 가압시간의 증가에 따라 재색의 암색화가 나타났으며, 재색변화에는 압밀화 시간보다 가열온도의 영향이 더욱 큰 것으로 나타났다.