• 한국염색가공학회지
• /
• 제3권3호
• /
• pp.15-22
• /
• 1991

The effects of electrolytes on color fastness properties of cotton fabric with Congo Red have been studied at $90^{\circ}C$. Each dyeing carried with $10 \times 10^{-6}M$ of Congo Red and with various concentration of electrolytes. The results obtained from this study were as follow 1. In the case of none, the fastness to washing became worse, but the fastness to light better with increasing dye concentration. 2. In the case of additing an electrolyte, the fastness to washing became worse and the fastness to light better than the case of none. The samples had become yellower after washing test. Yellowness had been reduced after fade-O-meter test. 3. What kind of electrolytes could not have any effect on the fastness to washing, but they influenced the fastness to light in the order of LiCl

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.314-326
• /
• 2013

The purpose of this research is to analyze the effects of Dansam and Sappan wood extract to perform combination dyeing on silk fabrics, with respect to color changes, fastness (washing, dry cleaning, perspiration, rubbing and light fastness), and functionality (antibacterial activity and deodorization). Combination dyeing was performed by first combining Dansam with Sappan wood, then Sappan wood with Dansam, in these orders. Given the changes in the combination ratio, pre-mordant treatment was performed. Looking at the surface colors of each dye, Dansam generally produces YR color series, while Sappan wood produces YR, R, and RP color series. The effects of changing the order in which combination dying was performed on the surface colors were as follows. First, combination dyeing (A) was performed by using Dansam before Sappan wood, to produce YR and R color series. Then combination dyeing (B) was performed by using Sappan wood before Dansam, to produce YR, R, and RP color series. By visual inspections, more similar color changes of the combination dyeing were noticed with the post-dyeing material rather than the pre-dyeing material. Therefore, it was presumably confirmed that surface color changes of combination dyeing were greatly influenced by the post-dyeing color. Individual dyeing tests for fastness showed that Dansam was comparatively superior to Sappan wood, which demonstrated lower fastness to washing, dry cleaning, perspiration, and light, relatively. The fastness of combination dyed samples was shown middle, but similar fastness to the post-dye material, The fastness of (B) method was higher than (A) method in the washing and light fastness. This confirms that color fastness from combination dyeing was considerably influenced by the post-dye material. It was found that all dyed samples had a very high bacterial reduction rate of 99.9% and high deodorization rate of 95%.

• 한국의류산업학회지
• /
• 제15권5호
• /
• pp.825-833
• /
• 2013

In this study, the dyeing properties of Phellodendron amurense on cotton and silk fabrics were evaluated to establish a scientific database of dyeing methods using natural dyes with the ultimate aim of facilitating the practical use of these dyes. The optimal thickener and dyeing concentrations depending on the thickener type were identified when dyeing with P. amurense, and the fabric color, color fastness, and antibiosis were examined for various thickeners, fabrics, and mordants. The results were as follows.: The optimal concentrations of thickeners when dyeing on cotton and silk fabrics were CMC 3% (w/w), Mayprogum 7% (w/w), and Indalka 9% (w/w). The optimal concentration of P. amurense was 25% (w/w), irrespective of the type of thickener. To maintain the hue unique to P. amurense, thickening with Mayprogum or Indalka and mordanting with Al was effective for cotton, while thickening with Mayprogum or Indalka and mordanting with Al or thickening with CMC and mordanting with gallnut was effective for silk. The dry-cleaning fastness and abrasion resistance of cotton fabrics dyed with P. amurense were excellent at the 4-5 level. Gallnut was effective for washing fastness and perspiration fastness against color degradation, and FFC was effective for light fastness. The washing fastness, dry-cleaning fastness, abrasion resistance, and perspiration fastness of silk fabrics dyed with P. amurense were excellent at level 4, except for washing and perspiration fastness, and FFC was effective for the improvement of light fastness. Dyeing cotton and silk fabrics with P. amurense thus yielded antibiosis and excellent washing fastness.

• 자연과학논문집
• /
• 제8권2호
• /
• pp.191-198
• /
• 1996

양말의 염색견뢰도에 영향을 주는 땀, 세탁의 인자를 선택하여 재질별, 성별착용에 따른 양말의 염색 견뢰도와 오염도 및 내구성 실험을 행하였다. 반복된 착용과 세탁에 의해 양말의 염색견뢰도는 면 100%의 것이 가장 우수하게 나타났으나 수축은 혼방제품과 면 양말에서 크게 나타났다. 성별착용 실험결과 남자가 착용한 것이 여자의 것보다 오염도, 수축, Pill 등이 훨씬 크게 나타나 내구성이 떨어지는 것으로 밝혀졌다.

• 한국의류학회지
• /
• 제40권3호
• /
• pp.456-464
• /
• 2016

A new combat uniform is improved for added combat safety with various functions such as survivability, battle conformity and a camouflage performance system. Camouflage performance is an important factor in terms of combat survivability since it makes identification difficult and provide security. The combat uniform is worn under extreme conditions (exposure to ultraviolet light, sweat and friction) and an excellent color fastness to repeated washing is required. In this study, we investigated the color management, durability and discoloration of new combat uniform fabric with a digital pattern for camouflage performance to provide preliminary color management data. We examined color differences between standard fabric and mass-produced combat uniform fabrics, color differences between each military supply contract firm and color changes in combat uniforms after 60 washing cycles. The slight color differences between standard fabric and mass-produced combat uniform fabrics were tolerable under quality criteria of Republic of Korea Ministry of National Defense. However, the differences between the military supply contract firms were recognizable to the naked eye and increased with repeated washing. Continuous research on color fastness under repeated washing and color management is required to standardize reliability from each military supply contract firm for the daytime performance of a combat uniform's camouflage.

• 한국의상디자인학회지
• /
• 제5권3호
• /
• pp.7-14
• /
• 2003

Fabrics dyed with artemisia extract have quite natural and elegant tones of color. This study purposed to find the best one for dyeing among artemisia collected in the four seasons in order to develop a more efficient method of dyeing with artemisia. As for the method of research, the researcher dyed wool fabric and silk fabric with artemisia, and measured dyeability according to the number of repeats of dyeing, coloration by post-mordant, color fastness to washing, color fastness to dry cleaning and color fastness to light. The results are as follows. 1. In dyeing with artemisia, dyeability was improved as the number of repeat of dying increased, and it was higher in wool fabric than in silk fabric. 2. Among artemisia collected in the four seasons, autumn artemisia had dyeability much inferior to that of artemisia from the other seasons, and winter artemisia had the best dyeability. 3. According to the result of treating fabric with post-mordant, the dyeability was improved significantly, and coloration was most remarkable when copper and iron mordant were used. 4. The color fastness to washing and color fastness to dry cleaning of fabric mordanted with artemisia were as high as grade 4-5 and grade 5 respectively. The color fastness to light was highest in winter artemisia as grade 4.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.62-68
• /
• 2017

Coffee sludge and onion shells are known typically as waste resources as well as simultaneously being the raw material for dye having a golden brown color. This research studies the dyeability, functionality, and colors of woolen fabric after being dyed by different dyeing method using coffee sludge and onion shells extract. The woolen fabric was refined and pre-mordanted with tannin. The dyeing process conducted was single-dye, using coffee sludge and onion shells extract, sequential multi-dye, consecutively dyeing with coffee sludge and onion shells, and mixed-dye, blending coffee sludge extract and onion shells extract to dye. The dyeing was measured on the surface color, color fastness, and UV-protection ability. As a result, the expression of various hues of tan using coffee sludge and onion shells extract were shown to be possible. Additionally, single-dye, sequential multi-dye, mixed-dye had generally superiority in color fastness to light, all rating 3 and color fastness to washing, rating 3 or 4, showing relatively stable color fastness to washing. The UV protection ability was shown to be better, especially appearing satisfactory in the UV-B protection, all measured to be over 90%.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.225-232
• /
• 2019

The colorants of kale powders were optimally extracted using an 1:1 mixture solvent of ethanol and DMSO at 105℃ for 30 minutes obtaining a high yield of 359.7㎍/mL chlorophylls. Low color fastness of the dyed fabrics with the extracts, particularly against washing and solar radiation, can be overcome by the combined treatments of chitosan, heat setting and tannic acid. Washing fastness to color change was improved from rating 1-2 up to 5 due to the enhanced electrostatic interactions between the colorants and the positive glucosamine unit of the chitosan in the cationized cotton. In addition, the tannic acid treatment contributed to the additional increase in color fastness after the sequential treatments of chitosan pretreatment, dyeing and heat setting.

• 한국의류산업학회지
• /
• 제17권1호
• /
• pp.127-136
• /
• 2015

The purpose of this study was to examine improvements in dye uptake, expression of various colors, and color fastness when washed or exposed to light. We examined these improvements by doing the combination dyeing of Juniperus chinensis heartwood and Alnus japonica heartwood extracts. In this study, two combination dyeing methods were used. One-bath dyeing involves combining Juniperus chinensis heartwood extract and Alnus japonica heartwood extract. Two-bath dyeing involves dyeing by sequence, which means that we dyed the Juniperus chinensis heartwood extract first and then dyed Alnus japonica heartwood extract sequentially (or in the opposite order). In terms of improving dye uptake, two-bath dyeing was more effective than one-bath dyeing. For cotton, dyeing Juniperus chinensis heartwood extract first and then dyeing Alnus japonica heartwood extract sequentially showed higher dye uptake in the two-bath method, while for silk, there wasn't much difference in the dyeing order. Through combination dyeing, red-violet color from Juniperus chinensis heartwood and brown color from Alnus japonica heartwood made various Y, YR, R series of color as a result. Moreover, combination dyeing improved fabric's fastness when washed or exposed to light. In the case of cotton, fabric dyed using two-bath dyeing, with Juniperus chinensis heartwood extract being the first dye, showed improvement in fastness to washing and light. And in the case of silk, fastness to washing and light improved regardless of dyeing order in two-bath dyeing.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.241-248
• /
• 2019

In this study, improving the wash and rubbing fastness of a natural coloring matter from Madder extract dyed on Tencel nonwoven. The cationic finishing agent(RBP), nonionic finishing agent(HPX) and mordant(PAW) were used to improving the color fastness. The two types(exhaustion and pad-dry-cure) finishing process were investigated with various finishing agent concentration. The color strength, wash and rubbing fastness of Tencel nonwoven dyed with Madder extract have been evaluated by various dye concentration and finishing agent. The exhaustion process treated with the cationic finishing agent(RBP) was effective to improving washing and rubbing fastness.