• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.529-537
• /
• 2001

According to increase of preference to the large display device, demand of a three-tube projection TV increase in the display market. But luminance per unit area of a 3-tube projection TV is less bright than that of original one -tube TV The color gamut of phosphor used in the projection TV is different to standard gamut of phosphor in NTSC. In this paper, we analyze the relationship between coordinates of RGB phosphor and RGB beam currents according to the color temperature in projection HDTV. We also proposed the range of reference white which maximize the luminance that viewer feel based on both Helmholtz-Kohlrausch effect which is visual property and degradation of image according to the change of beam profile by current-ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.351-354
• /
• 2002

The F!T tube is a new type of CRT without a shadow mask. Correct color reproduction is performed by an electronic system that measures the landing positions of the electron beams and corrects through a dedicated deflection system. This paper describes in detail the position sensor and some of the electronics needed to build a functional control system. The principle has been shown in single- and triple-beam 17" and 32" tubes, of which results are included.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3010-3011
• /
• 1999

컴퓨터 모니터용 Color Display Tube (CDT)와 TV수상기용 Color Picture에 모두 사용되는 부품인 shadow mask는 전자총에서 발생된 전자빔이 Screen에 이르기 바로 전에 위치함으로써 화질에 지대한 영향을 미친다. 이러한 shadow mask의 제작 기술은 발전을 거듭하여 현재는 한 쌍의 working pattern을 사용하여 생산하는 방식이 사용되고 있다. 본 논문에서는 를 고정밀 하고 고정시키는 자동 장비의 개발 사례를 소개 한다.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.2
• /
• pp.143-147
• /
• 2004

To design parts satisfying physical property in the continuous region, we do it in the discrete rectangular mesh points. Then we obtain points data from parts design and usually construct the surface using least squares method. In such case, that surface has an oscillation in the ineffective region which is inadequate for physical phenomena or NC machining. To solve both problems simultaneously, we extend the surface smoothly to have small curvature in the extended region. Up to now, we use the least squares method for the parts design in Color Picture Tube or Color Display Tube but in this paper, we use functions which is easily controllable. This surface has no error within the effective region compared to the least squares method.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.307-310
• /
• 2002

Color reproductions in most ink jet printer are quite different from that of standard CRT (cathode ray tube) monitor display because of the nonlinear characteristic in subtractive color reproduction. Gray scale CCT(correlated color temperature) reproductions in a typical printer are vary with the input RGB level. A simple method for making constant gray scale CCT and gamma value in photo paper is proposed in this paper. The compensation of the CCT with white point of the photo paper under the CIE standard illuminant D65 and color correction has been confirmed using the LUT(look-up table) to compensate the CCT and gamma curve characteristic.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.586-591
• /
• 2000

Color pictures on CPT are generally affected by the receiver characteristic and the condition of exterior illuminants. Moreover, readjustment of incorrect color in the CPT causes color distortion on a given picture. This paper describes a color adjustment method for modelling of CPT at the view point of observer in the ordinary lighting condition. To develop this method, we proposed ways of luminance recompensation under the gamma transformation for the intensity of illuminant, hue/saturation compensation for the types of illuminant and control of specific color for the reference. Based on these method, a color correlation system is suggested with the goal of reducing the color errors which are represented due to the influence of reflectance component of illuminants, the gamma transformation of CPT and the frequently adjustment of reference scene to set a optimum color.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.218-224
• /
• 1998

본 논문에서는 컬러 모니터용 전자관(CDT; Color Display Tube)의 편향 요크(DY; Deflection Yoke)의 제조 공정상 오차가 발생시키는 컨버전스의 오차를 보정하기 위하여 붙이는 페라이트 박판(Ferrite Sheet)의 위치를 결정하는 규칙을 생성하는 박판을 붙여야 하는지 판단한다. 이를 러프 집합 이론을 이용하여 컨버전스 값을 조건부 속성으로, 페라이트 박판의 위치를 판단부 속성으로 하여 판단 테이블을 만들고 이때 발생하는 몇 가지 문제를 해결하여 최소화된 규칙을 찾아내는 방안을 제안한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.961-963
• /
• 2002

Organic electroluminesencent device have been studied because of its easy fabrication and high brightness for plate panel display instead of cathode ray tube. There are some device structure for full color filter system can be applicable to the full color application if the blue light organic electroluminesencent device(OELD) is developed. In this study, we fabricated OELD of ITO/CuPc/PBD/LiF/Al using mixed of 500, 600, $700[{\AA}]$ by vacuum method as a emitting layer. We studied the voltage-current, voltage-luminance characteristics and blue light emission of OELD,

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.149-150
• /
• 2000

Lead-doped calcium sulfide(CaS:Pb) thin film electroluminescent devices were deposited using atomic layer deposition(ALD). CaS:Pb is a very promising blue phosphor showing very high luminance and the color coordinate close to the blue of cathode ray tube. The luminance, $L_{25}$, of CaS:Pb(1.6 mol.%) EL device was higher than 80 $cd/cm^2$ at a driving frequency of 60Hz. The color coordinates of blue EL emission of CaS:Pb deposited by ALD are consistent with the Pb concentration ranging from approximately 0.5 to 3 mol.%.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.3
• /
• pp.243-251
• /
• 2006

Field emission display(FED) is actively investigated in view of the development of full color flat-panel display, which can replace some cathode-ray tube(CRT). Thus, the development of new phosphors appropriate for FED is urgently needed and has been actively investigated. In this work, $SrTiO_3:Pr^{3+}$ phosphor was prepared by sol-gel method and the coating was applied by sol-gel method combined with sonication on these phosphor's surface into diluted precursor solution. It was found that very fine particles of coating material were formed on phosphor's surface. The luminescent intensity of $SrTiO_3:Pr^{3+}$ phosphor coated with $SiO_2$ and $Al_2O_3$ was considerably increased without any noticeable change in color chromaticity. The optimum concentration of coating material was found to be 1wt% and the optimum pH value of the solution was 10.